다음을 통해 공유

Writing monitors to target Logical or Physical Disks

  • 아티클

<!--[if lt IE 9]>

<![endif]-->

Comments

  • Anonymous
    January 01, 2003
    The comment has been removed

  • Anonymous
    January 01, 2003
    Hi Kevin, I have followed the same steps and have set up the threshold as 20%. I was hoping that I would be getting alerts when free space is less than 20 % but I am getting alerts only when free space is above 20%. How Can i correct that.

  • Anonymous
    January 01, 2003
    Hi Kevin, I have a Drive D: of 2 GB and i have 2 LUNS attached as D:Log and D:Data will i be able to monitor free space on LUNS using same process. Rakesh

  • Anonymous
    January 15, 2010
    Excellent information, thank you Kevin.

  • Anonymous
    January 18, 2010
    why some times the green satet becomes gry but it is still healthy ?

  • Anonymous
    June 24, 2010
    Saved the bacon again Kevin! Thankyou JB

  • Anonymous
    April 26, 2013
    Thank you very much, great work kevin

  • Anonymous
    November 05, 2013
    Hi Kevin - Great blog.... We cannot seem to get 'Physical Disk - Availability' working.... I've turned on monitoring physical disks as described here - technet.microsoft.com/.../dd262052.aspx ...afterwards, all we see within Health Explorer of any given server, is that for the Disk 0, 1, 2 etc only the 'Performance' element is monitored. The 'Availability' element is not checked. Can you help? Thanks

  • Anonymous
    May 05, 2014
    Great work Kevin, can we apply the same methodology for CPU monitoring?

  • Anonymous
    May 26, 2014
    Hi Kevin
    Thanks for your great post.
    I Have HP-UX servers to monitor and everything is fine until we change the servers disks. when we change a disk "Logical Disk Health" monitors State goes Critical. I changed the discovery interval and no luck. what am i missing?

  • Anonymous
    July 24, 2014
    Great post Kevin !!. I have created the monitor exactly as above. Availability is not checked in health explorer for any agent. can you please help?

  • Anonymous
    July 28, 2014
    Hi Kevin
    Thanks for your post, Keep up the good work!

  • Anonymous
    February 19, 2015
    Great post kevin....you saved my day....I was stuck up with this n was getting bombarded by alerts...thanks alot.

  • Anonymous
    April 04, 2015
    Hi Kevin
    Thank you for very good explanation. It helped me to understand my problem.

    SQLServerRockstar asked you in 2010, how to monitor free space on LUNS or mountpoints. I have the same problem. I can see the instance, if I select my system directly. If I use "$Target/Property[Type="MicrosoftWindowsLibrary7585010!Microsoft.Windows.LogicalDevice"]/DeviceID$" I only get the drive and not the LUNS which are mounted to the drive. What would be the correct name for the instance?

  • Anonymous
    August 13, 2015
    Hi, Kevin!

    Very nice this post. I have a doubt...writing this way, will apply to all servers on my environment or just to a machine that I selected? My problem is... We've 6 VMs with OS Disk (C:) and they have others units like D: and E:, all of them are W2K12R2 running on Hyper-V. In SCOM, I can see all others disks of others VM normally...

  • Anonymous
    August 13, 2015
    @Jean -

    I'm sorry - I don't understand what you are trying to accomplish. Can you explain what you want in detail?

  • Anonymous
    February 18, 2016
    how can we setup if we just needed for one drive example C:

  • Anonymous
    February 18, 2016
    some of the drive is not triggering the alerts. if we need below 20% free space. we need configure the threshold at 80.00?