Arduino Netduino: Oscilloscope and Logic Analyzer

I have been thinking about buying a nice Oscilloscope/Logic Analyzer ever since I bought that little cheapie one I bought a few weeks ago.  But then I thought that it would be cool to build one.  I know how they work, and usually my needs are pretty low tech and low bandwidth.  As a result I am going to try to build one using either an Arduino or Netduino.

Here are some of the plans I am reviewing, mainly since it will definitely be more expensive to build then to buy, but it would be cool to have the experience:

https://www.practicalarduino.com/projects/scope-logic-analyzer , this one looks good!

https://www.instructables.com/id/Girino-Fast-Arduino-Oscilloscope/, fast, but complicated, if you have built out other kits or projects, this is for you.

https://mitchtech.net/arduino-oscilloscope/ cheap, requires only an UNO board and a wire

https://sebastiannilsson.com/en/k/projekt/realtime-plotter/, cheap, not a true Oscilloscope, but close enough and simple.

I am definitely going to give one of the harder ones a try, but the last two are likely good enough to solve most problems that require an O-scope (Oscilloscope).

Comments

• Anonymous
  June 19, 2014
  Hey, I wrote the Arduino Oscilloscope article on MitchTech's blog. For what it's worth, I use the "Open Bench Logic Sniffer" for purposes of i2c and spi debugging. Definitely get the "Logic sniffer Probe Cable" with it. What I've learned to look for in a logic analyzer:

• Ease of instrumentation. The Open Bench probe cable tweezers-style connectors are GREAT.

• Software. Open Bench has software that works with it.

• Resolution. Ensure probe device has a resolution that is capable of measuring your device under test. Using Nyquist-Shannon sampling theorem it's roughly 2*period of the device you are sampling. dangerousprototypes.com/.../Open_Bench_Logic_Sniffer

• Anonymous
  August 07, 2015
  The comment has been removed