다음을 통해 공유

Understanding Group Management - Outbound Group Synchronization

  • 아티클

This is the next post in a series of postings for Group Management. it may be helpful to read the following post:

Much like users, we can generate groups (security or distribution) in the Portal and then flow those groups back out to AD (including any members we assign to them). However, as with users, we must first create an outbound group synchronization rule (and associated management policy rule and workflow).

To begin, navigate to the Portal home screen:

On the right-hand menu, select “Synchronization Rules”

 

This will open the Synchronization Rules Page.

 

This page displays all currently configured Sync Rule and the following information.

  • Display Name – This is the name of the Sync Rule which is entered on the General Tab when configuring the Sync Rule

  • Description – Any additional information which was added during the configuration of the Sync Rule which is entered on the General Tab when configuring the Sync Rule

  • Precedence
  • External System

 

In the top of the menu bar, select “New”

 

 

 

You are now presented with a window which has 6 tabs by default .

The First tab which is the “General” Tab is what the New Synchronization Rule Window opens up with. This presents you with 5 attributes that can populated or modified.

  •  Display Name – This is the name of the Sync Rule (This attribute is required by default)
  •  Description – Information entered can be used to assist in the understanding of what Specific Sync Rules are used for without exploring the Sync Rule.
  •  Dependency – Gives you the option to select another Outbound Sync Rule that would need to be processed first prior to the Sync rule from being processed.
  •  Data Flow Direction – Gives you the option to Select 1 of 3 Data Flow Direct types (What direction the Data will be synchronized with the connector space and the Metaverse.)
    •  Inbound – Brings Data into the Metaverse from the connected connector space
    • Outbound – Sends data to the connected Connector Space from the Metaverse.
    • Inbound and Outbound - This is a Bi-Directional Sync Rule which is used to Sync Data into the Metaverse and out to the connected connector space

 Note: This is just my opinion and I have no Solid evidence either way but I never use the Bidirectional Sync Rule as I feel it is harder for management to understand when during High Level Over views of the environment and how it is configured. Additionally I believe there is less chance for Sync Rule Corruption in the Metaverse. THIS IS JUST AN MY OPINION and I have no solid evidence of the statement noted.

  • Apply Rule – This is used to determine how the Sync rule will be applied to objects in the Metaverse. (If further information is needed please review the sections for understanding sync rules.)
  • To specific metaverse resources of this type based on Outbound Synchronization Policy.
  • To all Metaverse resources of this type according to Outbound System Scoping Filter.

 

The Second Tab which is the “Scope” Tab

Under the “Scope” tab select the following

  • “Metaverse Resource Type”, use the drop-down menu to select “group”.
  • For “External System”, select the name of the Management Agent you wish to connect to, In this example this will be used as the Target MA as this is Sync Rule is an Outbound Sync Rule.
  • “External System Resource Type”, choose “group”.

For “Outbound System Scoping Filter” select the following

  • MetaverseObject:group(attribute) use the drop-down menu to select objectType
  • Operator use the drop-down menu to select equal
  • Value type Group

Note: I would recommend defining the Scope to be a little more exclusive because this will allow any object type in the Metaverse that has the objectType set to Group. Additionally if you wanted this Scoping Filter Sync rule to apply to all groups in the Metaverse you could also leave this section empty as the first layer of scoping is done in the above section when you selected the Metaverse Resource Type and External System Resource Type.

 

Click “Next” to continue.

The Third Tab which is the “Relationship” Tab (Will be required if configuring a Traditional Sync rule)

For “Relationship Criteria” you could populate this field but once the Outbound System Scoping Filter based Synchronization Rule has been completed whatever was populated as the Relationship Criteria will be removed for Outbound Sync Rules. “Relationship Criteria” is only available to be populated for Inbound Sync rules or the classic method of managing objects via Sync Rules which required MPR, SET’s and Workflows.

 If you will be using this Synchronization Rule to provision groups be sure to check the box next to “Create resource in external system”, then click “Next” to continue.

If you wanted to set up

 

Note: You would only check the Create resource in external system check box if this Synchronization Rule will be used to provision Groups to the Connector Space that this Synchronization Rule connects to, in this Guide this Synchronization Rule connects to the ADMA which was defined in the External System section a few slide back.

The Forth Tab which is the “Workflow Parameters” Tab (Is not displayed if using an Outbound System Scoping Filter)

In the “Workflow Parameters” tab, click “Next” to continue. (Because we are using a Scoping Filter to apply this synchronization rule in the Metaverse this option is not functional, anything you type here will disappear after you save the Synchronization Rule. Upon clicking on this synchronization rule for any additional attribute flow or other editing you will find that the Workflow Parameters tab is no longer available to click on.

 

 

Note: In case you were wondering the Workflow Parameter Tab is only functional for traditional Synchronization Rules that require ERE’S (Expected Rules Entry) objects associated to the object being synchronized. Workflow Data is a way to pass values from workflows to the Sync rule for a user.

 

The Fifth Tab which is the “Outbound Attribute Flow” Tab (Technically this is the fourth tab if configuring an Outbound System Scoping Filter Sync Rule)

 

Under the “Outbound Attribute Flow” tab, we will configure the outbound flows to sync and provision groups if this Sync rule will be used for Provisioning. These are all fairly standard, with a few exceptions.

Suggested Attribute flow Environment Dependent: Direct Attribute Flows

Note: Any Attribute that will be managed by the FIM Portal such as MembershipLocaked and MembershipAddWorkflow which are used to determine the type of group must have a supporting attribute flow configured on the FIMMA. Please see referenced links at the beginning of this post.

 

Source (Metaverse) Destination (Connector Space)
displayName displayName
description description
Member member
displayedOwner managedBy
membershipAddWorkflow extensionAttribute1
mail mail

 

Suggested Attribute flow Environment Dependent: Direct Attribute Flows (Initial Flow Only)

Source (Metaverse) Destination (Connector Space)
accountName samAccountName
mailNickname mailNickname

 

Suggested Attribute flow Environment Dependent: customExpression Attribute Flows

Source     (Metaverse) Destination (Connector Space)
IIF(Eq(type,"Distribution"),IIF(Eq(scope,"Universal"),8,IIF(Eq(scope,"Global"),2,4)),IIF(Eq(scope,"Universal"),-2147483640,IIF(Eq(scope,"Global"),-2147483646,-2147483644))) groupType
IIF(memmbershipLocked,”true”,”false”) extensionAttribute2
“CN=”+displayName+ IIF(Eq(membershipAddWorkflow,"Owner Approval"),",OU=Managed,OU=groups,OU=FIMObjects,DC=contoso,DC=com",IIF(Eq(membershipLocked,"false"),",OU=Open Enrollment,OU=groups,OU=FIMObjects,DC=contoso,DC=com",",OU=Dynamic,OU=groups,OU=FIMObjects,DC=contoso,DC=com")) dn

 

Suggested Attribute flow Environment Dependent: customExpression Attribute Flows (Initial Flow Only)

Source     (Metaverse) Destination (Connector Space)
“CN=”+displayName+ IIF(Eq(membershipAddWorkflow,"Owner Approval"),",OU=Managed,OU=groups,OU=FIMObjects,DC=contoso,DC=com",IIF(Eq(membershipLocked,"false"),",OU=Open Enrollment,OU=groups,OU=FIMObjects,DC=contoso,DC=com",",OU=Dynamic,OU=groups,OU=FIMObjects,DC=contoso,DC=com")) dn

 

Note: The Custom Expression used to build the DN in the above suggested Attribute flows has requirements for specified OUs and Domain information which will be different for every environment

 

 

 

After the Attribute Flows have been entered click on Next to continue to the Summary Page or click on Finish which will also take you to the Summary Page.

The Last Tab is the “Summary” Tab

 

  Review Displayed information and click on Submit when completed and are ready to finalize the creation of the Sync Rule.

Note: some information such as the Attribute Flows will not be displayed in detail on the Summary Tab.

 

Building the DN

The below image shows the “Origin” flow for destination “dn”. In this scenario, the resulting DN would look like this:

“CN=”+displayName+“,OU=groups,OU=FIMObjects,DC=Contoso,DC=com”

In order for groups to join or provision into AD we must somehow specify where they are to go. In this case, by setting the “description” attribute to mirror the OU in which they reside, we can intelligently provision them.

 

Destination is DN

 

Understanding groupType

The other flow that must be somewhat custom relates to “Type”. Within Active Directory, “type” is a bit-mask, therefore we cannot do a 1:1 flow. This is because the information about the type and scope of a group is located in a single attribute based on bit values.  For “Origin”, we must select “Custom Expression”, and in the text field, enter:

 

IIF(Eq(type,"Distribution"),IIF(Eq(scope,"Universal"),8,IIF(Eq(scope,"Global"),2,4)),IIF(Eq(scope,"Universal"),-2147483640,IIF(Eq(scope,"Global"),-2147483646,-2147483644)))

 

Destination is groupType

Additional Group Type Information

Within AD, there are two types of groups, Distribution and Security. For each, there are also three scopes: Global, Domain Local and Universal. With the above custom expression, we are providing the flow an intelligent way of determining what class and type a group needs to be provisioned as. The numbers above correspond to:

Distribution Global: 2

Distribution Domain Local: 4

Distribution Universal: 8

Security Global: -2147483646

Security Domain Local: -2147483644

Security Universal: -2147483640

 

Account Names

One additional CustomExpression that you may wish to add is to populate the Account for Distribution Groups which by default in the Portal is not created nor is there a place to populate a value for the Display Name of a Distribution Group when created in the Portal.

You may wish to consider what the Display Name looks like, does it contain invalid characters? Which would prevent the group from being provisioned in Active Directory. It may be best to consider a workflow to create the Account Name for Distribution Groups instead of trying to handle it in with the Synchronization rule.

 

Destination sAMAccountName

 

 

 

Thank you for visiting

https://blogs.msdn.com/b/connector_space/

Comments

  • Anonymous
    December 19, 2016
    Hi Anthony, we have done everything in this guide, and we see the synchronization rule as a Connector with Flow Update after doing a Delta Sync. We created a new group in the MIM portal, but we do not see anything being projected in the ADMA. Unfortunately we don't see any errors, it just never gets created. Any ideas?
    • Anonymous
      December 20, 2016
      1st can you verify that the "created" group shows up in the Connector Space of the FIMMA after an Import ?2nd In the Sync Engine Verify that the Sync Rule Provisioning is enabled ?3rd have you checked Precedence in the MV ?
      • Anonymous
        December 20, 2016
        Hi Anthony, thanks for the reply.1. Yes, I can see the new group in the MIMMA Connector Space2. Yep, sync rule provisioning is enabled3. Do you mean the Metaverse Designer precedence for group attributes, or the Precedence on the sync rule?If I search in the Metaverse for the new group, and then try doing a preview Full Sync. I see the Provisioning Summary which lists the outbound group sync rule. But clicking that all I see is "Status: Not Applied".
        • Anonymous
          December 21, 2016
          Excellent question, when thinking about attribute precedence its a safe bet to look at the metaverse Designer and looking at the Precedence of the individual attributes associated with each object type.Sync Rule Precedence is used to determine the "precedence" or in another words "priority" of the Sync Rule and how its applied to the metaverse. I would first look at all the attributes that part of the Group Sync Rule, additionally make sure that you have the specific attributes such as DN defined as Initial Flow and the proper provisioning and projection checked on the sync rule. You can also email screen shots to connectorspace@microsoft.com