다음을 통해 공유

Windows PE 2.0 - XP Disk partitioning issues

  • 아티클

Many people have been having "Fun and Games" when using Windows Preinstallation Environment (Windows PE) 2.0 to create partitions on a hard disk.

They use Windows PE to create a partition which XP is then installed onto, this then results in a "Blue Screen" at first reboot. This issue only occurs with some BIOS's but can be extremely frustrating.

There is now a patch available for this issue:

Windows 2003: https://support.microsoft.com/kb/931761/en-us
Windows XP: https://support.microsoft.com/kb/931760/en-us

This patch needs to slimstreamed into your XP source files, and your done!

There is also a workaround for this issue which is detailed in the KB article or if you are using BDD 2007 then take a look at Johan Arwidmark's blog.

Disclaimer: The information on this site is provided "AS IS" with no warranties, confers no rights, and is not supported by the authors or Microsoft Corporation. Use of included script samples are subject to the terms specified in the Terms of Use .

Comments

  • Anonymous
    January 01, 2003
    I see the same issues coming up over and over again with BDD 2007. So, I decided it was time for my own

  • Anonymous
    January 01, 2003
    Hi Kely, You can do this using Windows PE. There is a post by Johan Arwidmark. http://www.deployvista.com/Blog/JohanArwidmark/tabid/78/EntryID/48/language/en-US/Default.aspx Thanks, Ben

  • Anonymous
    January 01, 2003
    Hi Kelly, The SMSTasksequencer and minint folders should not exist on a client after deployment. If they do exist then that suggests that there was an issue with the previous deployment. The only time you should get a refresh build is when you aunch the deployment process from within the Host OS. If you launch from CD/WDS then it should do a clean install. Thanks, Ben

  • Anonymous
    January 01, 2003
    Now that I'm up and running with Hyper-V on my laptop, I decided to put together a LiteTouch demo

  • Anonymous
    January 01, 2003
    What do you mean you still don't read Ben's blog? It is non-stop information all around BDD,

  • Anonymous
    January 01, 2003
    The comment has been removed

  • Anonymous
    January 01, 2003
    Hi Ben, Not often, but at times, the image deployment gets interrupted and we have to start over with the image deployment. When this happens, we have to manually format the drive before it will successfully image. Is there a way to configure the task sequence to always format and partition disk, regardless of the gather deciding to do a refresh? Thanks Kelly

  • Anonymous
    January 01, 2003
    In our environment, regardless of what is on the hard drive (SMSTasksequencer, minint folder) we need it to format the drive and always do the OSD. As it is, if the minint or smstasksequencer folders are present, it does a refresh. Can I configure my task sequence to always do a new clean install? Thank you.

  • Anonymous
    October 30, 2007
    The comment has been removed