Problems installing the new ASP.NET hotfix (KB886903 or KB887219)

아티클
02/13/2005

I got a question from a customer this week who could not get an ASP.NET hotfix installed by launching it from Windows Update (due to an error like some folks have seen with other .NET Framework service packs that I described here). As a result, he was trying to download the package directly, extract it and install manually, but he was having trouble trying to locate the underlying package and download it. So I decided to try to do this myself to see how the process really works for an IT admin in the field, and I'm surprised by how complicated this process is. Here are the specific steps I had to follow to locate and download this ASP.NET hotfix:

I retrieved the KB article number from the Windows Update site
I went to the Microsoft support site and found a link here that announces the security bulletin
From there I followed the link for IT professionals since those links typically contain direct links to download packages to stage for installation in corporate networks or other scenarios where Windows Update is not an ideal option
From there I followed the link to the Microsoft download center and used the suggestion to search for the keyword security_patch and filtered based on the .NET product family. This gave me this results page
From there I could choose what version(s) of the .NET Framework I wanted to patch and download the appropriate hotfix. For example, this link leads to the hotfix that applies to .NET Framework 1.1 with SP1
Now that I have downloaded the hotfix package, I can go back to the link for IT professionals and drill down to the details of the version of the hotfix I downloaded to figure out what command line switches to use to extract the contents of the package

It really seems like there should be an easier way to locate, download and extract a hotfix package from Microsoft. If there is a simpler way that I have missed, please post a comment and let me know.

As a side note, this and any other .NET Framework or ASP.NET hotfixes are packaged using the same self-extracting wrapper as the .NET Framework 1.0 SP3 and 1.1 SP1, and therefore are all susceptible to the same set of issues as those service packs. There is one big issue (that I consider to be a flaw) in the design for the packaging of the .NET Framework service packs and hotfixes. The self-extracting wrapper EXE is written in managed code, so that means that if the .NET Framework is broken in any way and needs to be repaired, then the patch package will not even extract and launch correctly, and it cannot even give a useful error message.

Comments

Anonymous
February 13, 2005
I somehow must have managed to mess up the .NET Framework installation, both on XP and 2KPro. This is very embarrassing, since I'm the believer in keeping machines "clean" and would always rant against my colleagues installing 3rd party add-ons all over VS, but actually none of them had this problem.
I couldn't get the patch to install, so I tried repairing/removing/reinstalling .NET Framework 1.1 (SP 1) but all that failed with 1612.
Repairing VS2003 Pro didn't help and neither did installing VS2003 EntAr.
So I took the path described. It's a relief, but doesn't feel good.
Anonymous
February 14, 2005
Hi Henry,

Error 1612 means that Windows Installer was unable to find the source location. In the cases that I have seen this for the .NET Framework, it has been because someone tried to silently install a hotfix for the .NET Framework (for example by using Windows Update), and Windows Installer detected that the .NET Framework needed to be repaired first. Because the .NET Framework is installed using an IExpress package, the source files are copied to the %temp% folder and then deleted when setup exits. In order to fix this, here is what I normally try first:

1. Re-download dotnetfx.exe or locate it on a CD that you installed from
2. Run dotnetfx.exe /t:c:dotnet /c to extract the source files
3. Run msiexec.exe /fvecms c:dotnetnetfx.msi to repair the .NET Framework

I hope this helps...
Anonymous
February 14, 2005
The comment has been removed
Anonymous
February 15, 2005
Work is being done to replace the managed wrapper and to return better error codes. This has been a huge problem and actually increases the size of the patch, though compressing the MSTs separate from the MSPs yields better compression since the CAB compression algorithm will save space for the mostly-similar MSTs, where an MSP will compress each MST separately and you lose out in the size savings.

Apparently there was a reason, but I wasn't here at that time.
Anonymous
February 15, 2005
The comment has been removed
Anonymous
February 15, 2005
Hey Heath - thank you for posting information about the plans for the hotfix/SP wrapper setup executable. I am really happy to hear that these setups will be more robust and debuggable in the future.
Anonymous
February 16, 2005
WONT LET ME UPDATE
Anonymous
February 16, 2005
Hi John, it would help if you can provide more details about what error messages you are receiving and what troubleshooting steps you have tried so far. There are a lot of suggestions in this blog article and in some of my previous postings that will hopefully be useful to you. Please let me know.
Anonymous
February 16, 2005
OS: XP Home
"...Registeresd JIT debugger is not available..."
I'm sending this in for a fiend. This all the info I have. Could I, how can I, turn JIT debugging off? This machine is only used for email and surfing. Thanks Aaron.
Anonymous
February 16, 2005
Aaron, did you get my email about trying your suggestion? Basically the MsiInstaller event only said this so I couldn't tell which hotfix was the problem. I found in the registry that it might have been SP1, but that MSP wasn't accepted when I tried to uninstall and browsed to the MSP when it asked for tmp7.tmp

Event Type: Information
Event Source: MsiInstaller
Event Category: None
Event ID: 11708
Description:
Product: Microsoft .NET Framework 1.1 -- Installation failed.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 43 42 32 46 37 45 44 {CB2F7ED
0008: 44 2d 39 44 31 46 2d 34 D-9D1F-4
0010: 33 43 31 2d 39 30 46 43 3C1-90FC
0018: 2d 34 46 35 32 45 41 45 -4F52EAE
0020: 31 37 32 41 31 7d 172A1}
Anonymous
February 16, 2005
When I try to install the KB886903 fix through win update, or by using the hotfix exe directly, it gives me an error in "SL14a.tmp" and exits. (actually, SLXXX.tmp, since the last 3 characters of the filename before the extension appear to be randomly generated). the full text of the error is as follows:
Dialog title:
SL14a.tmp - Common Language Runtime Debugging Services
Dialog body:
Application has generated an exception that could not be handled.
Process id=0xbc0 (3008), Thread id=0xea8 (3752).
Click ok to terminate, cancel to debug.

anyone have any idea what this is caused by, and what i could do to get this installed?
Anonymous
February 17, 2005
Hi Eric, I did send you a reply email yesterday, please let me know if you did not get it and I will resend. Thanks!
Anonymous
February 17, 2005
Aaron, I didn't get the reply. Go ahead and resend, and I'll ask our admin to be on the lookout in case it's getting blocked.
Anonymous
February 18, 2005
Dan - for the CLR debugging error you are seeing, I would suggest first trying the troubleshooting steps listed in one of my older blog items - http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx">http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx. That item is about the .NET Framework 1.0 SP3 and 1.1 SP1 but the setup wrapper is the same as for these ASP.NET hotfixes so the issues there are equally valid for both.

Dave - I am researching some of the Windows debugger registry settings to answer your question. In the meantime I would suggest that your friend also take a look at the troubleshooting guide at http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx">http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx.

Eric - I have resent the mail from yesterday. It did have an attachment on it but I renamed it from .exe to .txt so hopefully it will not be blocked by your mail server.
Anonymous
February 18, 2005
Aaron,

Receiving similar messages related to the .net update from last weekend. Still have not been able to resolve. Not quite sure which steps to follow. XP Pro is the operating system. I have looked for hte uninstall of the .net framework but do not see it's location. Suggestions appreciated.

Mike
Anonymous
February 21, 2005
Hi Mike, the best place to start is the troubleshooting guide that I posted here - http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx. I will also follow up with you via email.
Anonymous
February 21, 2005
Dave - I am not sure how to turn off debugging but I have found this registry key that controls what debugger gets launched when a crash occurs. It is located at HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionAeDebug. The data in the Debugger value is the executable that is launched when a crash occurs.
Anonymous
February 27, 2005
Just an FYI
The SMS mssecure.cab had an error in it the first week it was out.
886903 was mistaken for 886904. Machines would try to install 886904 instead of the correct 886903.
Anonymous
February 27, 2005
I have windows 2000 pro with sp4 and tryed to install dotnetfx and gets this error"

RegSvcs.exe - Common Language Runtime Debugging Services

Apllication has generated an exception that could not be handled.

Process id=0Xa5c (2652), Thread id-0xac4 (2756)
Anonymous
February 28, 2005
Hi Deamon - at the end of last week we had 2 reports of this problem from customers who called our Product Support team. These cases are still under investigation because our common troubleshooting steps did not work. I will post a follow-up on my blog as soon as we identify what the root cause is and what the possible workarounds are.
Anonymous
March 01, 2005
I am just an average user and I keep finding this KB886903 download in my update, cannot install it and the yellow shield is permanently on my taskbar telling me to install a critical update. I do not even use net framework. How do I stop winxp from notifying me about this
Thanks
Anonymous
March 01, 2005
SLxx.tmp - Common Language Runtime Debugging Services

Hi. I think this is the same problem as reported by Dan above, but I haven't been able to fix it yet.

I looked at the .NET configuration workaround procedure but My_Computer_Zone looks different from the description. If I go under Properties then there's a Permission Set tab, under which FullTrust is already set.

Still doesn't install. Help!
Anonymous
March 01, 2005
J.C. - the best solution to get WinXP to stop notifying you about this hotfix is to figure out why it is failing to install and resolve that issue. The reason I say that is that you may not knowingly use the .NET Framework, but you may have some products installed that are built on top of the .NET Framework. Could you try to go to the download site for this hotfix and download it and try to run it directly? This will show more detailed error information. You will probably need this version of the hotfix - http://www.microsoft.com/downloads/details.aspx?FamilyID=8ec6fb8a-29eb-49cf-9dbc-1a0dc2273ff9&DisplayLang=en. However, depending on what version of the .NET Framework you have on your machine you might need a different hotfix - you can go to http://www.microsoft.com/downloads/results.aspx?freetext=security_patch&productID=C9C8FCFB-BFF3-40CA-B59D-216F6850000A&DisplayLang=en and choose what version of the hotfix to download.

Then after downloading the hotfix you can run it by double-clicking it and it will probably give some kind of error. If you can let me know what the exact error is, we can try some additional troubleshooting steps.
Anonymous
March 01, 2005
Severin - there are several different causes of the CLR Debugging Services error that you are seeing. Like for Dan, my first suggestion to you would be to check the troubleshooting doc I published a little while ago. You can find that at http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx. If the suggestions there do not work, please contact me via email at aaronste (AT) microsoft (DOT) com and I can try to help further.
Anonymous
March 08, 2005
Problem with KB886903.

I have a message:

Process ID = 0xabc(2748)
Thred ID = 0x634 (1588)

Now i'm stuck and I can't make any update on my windows... Can you help me...? Thanks.
Anonymous
March 08, 2005
Problem with KB886903. I have a message: Process ID = 0xabc(2748) Thred ID = 0x634 (1588) Now i'm stuck and I can't make any update on my windows... Can you help me...? Thanks.
Anonymous
March 08, 2005
Hi Sylvain - can you try to do the following to download and extract the patch and try to install it directly? I am hoping that this will give you a more detailed error message:

1. Locate the .NET Framework hotfix you want to install by going to the Microsoft download center and searching for the keyword security_patch and filtering based on the .NET product family.

2. Download the correct version of the .NET Framework hotfix you want to install. Every .NET Framework hotfix ships with a separate version that will only install if you have a specific .NET Framework service pack installed. So you will need to download the hotfix that matches the service pack you have installed

3. Extract the hotfix MSP package to a folder by running <name of hotfix>.exe /Xp:c:dotnetnetfxhotfix.msp

4. Go to c:dotnet and right-click on netfxhotfix.msp and choose Apply

If this gives an error can you try to use the instructions at the bottom of the article at http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx to generate a verbose log file and then send that to me?
Anonymous
April 08, 2005
I wrote an application late last year that is designed to clean up computers that have problems getting...
Anonymous
May 14, 2005
RePost:
http://www.yeyan.cn/SoftwareEngineering/ProblemsInstallingNET.aspx
Anonymous
January 01, 2006
Thank you Aaron - your advice right at the top of the thread solved my problem I was having with Automatic Updates trying and failing to install the KB886903 security update for .NET Framework 1.1 SP1 on Windows XP Pro SP2.

James
Anonymous
February 03, 2006
IS THE D**N THING [SERVICE PACK 1 {KB886903} NEEDED----I KEEP GETTING A MESSAGE STATING THAT IT CANNOT BE DOWNLOADED----EVERY DAY
Anonymous
February 03, 2006
Hi Genans - Can you please try to use the steps listed at http://blogs.msdn.com/astebner/archive/2005/10/11/479928.aspx to clean off and re-install the .NET Framework 1.1 and see if that will resolve this issue? The item you listed is Service Pack 1 for the .NET Framework 1.1 and it would definitely be good to install that if possible.
Anonymous
March 06, 2006
The comment has been removed
Anonymous
March 06, 2006
Hi Justme - I would like to try to help you resolve the problems that you have run into. Can you please provide more details about the exact error you are seeing so I can try to narrow down the cause and determine a workaround/fix?
Anonymous
April 03, 2006
The comment has been removed
Anonymous
April 05, 2006
Hi Bob - I'm sorry that you have been encountering problems installing this hotfix. I cannot tell from your post whether or not you are still having problems. If so, can you please try the steps listed at http://blogs.msdn.com/astebner/archive/2005/10/11/479928.aspx and see if they help resolve this issue on your system?
Anonymous
June 14, 2006
I am facing an issue with installation of the .net framework patches (KB886903 and KB886906). I get the following error: SLxx.tmp - Common Language Runtime Debugging Services

I referred your suggestions in the following links and have tried most of the troubleshooting steps informed. Yet, my problem is not solved.
http://blogs.msdn.com/astebner/archive/2005/02/13/371967.aspx
http://blogs.msdn.com/astebner/archive/2004/11/23/268934.aspx
http://blogs.msdn.com/astebner/archive/2004/09/21/232653.aspx

I had the same issue while I was trying to deploy the same two patches about a year back. I solved this issue at that moment by performing the steps in the following URL:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpguide/html/cpconenablingjit-attachdebugging.asp
If I create the registry key HKEY_LOCAL_MACHINESoftwareMicrosoft.NETFrameworkDbgJITDebugLaunchSetting with value as 1, the patches got installed at that time.

But now, even that is not solving this issue. I am getting this error inconsistently on my client machines.

My workstation is a standard Windows XP Pro SP2 with Office 2003 SP1 configuration.

I need to deploy these patches along with some other applications to my users ASAP and would greatly appreciate any inputs from you regarding this. Please let me know if you need any more information.

Thanks in advance.
Anonymous
June 15, 2006
Hi Vijay - I would suggest trying the workaround described at http://blogs.msdn.com/astebner/archive/2005/10/11/479928.aspx and see if that solves this issue.
Anonymous
September 14, 2006
The comment has been removed
Anonymous
January 11, 2007
A recent Windows Update failure (Error number 0x80190193) encountered when applying patch kb886903 to .NET 1.1 SP1 was completely resolved and eliminated by temporarily shutting down an old version of the ZoneAlarm firewall. (A dozen other, more complicated fixes had no effect.) YMMV HTH
Anonymous
March 03, 2011
i was wanting to know what this means...Process ID= 0x1718 (5912), Thread ID= 0xac4 (2756)....when i get on facebook and i try playing a game or upload vidoes on it it says that the internet stopped working and then that appears...
Anonymous
March 04, 2011
Hi Irma - Troubleshooting crashes in web browsers is not in my areas of expertise. You may want to try to upgrade to a new version of your browser or try a different browser to see if that helps in this scenario.

다음을 통해 공유

Problems installing the new ASP.NET hotfix (KB886903 or KB887219)

Comments

추가 리소스