Netdiag Syntax

[アーティクル]
10/08/2009

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

NetDiag Syntax

NetDiag uses the following syntax:

Art Image netdiag [/q] [/v] [/l] [/debug] [/d:DomainName] [/fix] [/DcAccountEnum] [/test:TestName] [/skip:TestName] [/?]

Parameters

/q
Specifies quiet output (errors only).

/v
Specifies verbose output.

/l
Sends output to Netdiag.log. This log file is created in the same directory where Netdiag.exe was run.

/debug
Specifies even more verbose output. With this parameter, NetDiag takes a few minutes to complete.

****/d:DomainName
Finds a domain controller in the specified domain.

/fix
Fixes minor problems.

/DcAccountEnum
Enumerates domain controller computer accounts.

****/test:TestName
Runs only the listed test(s). TCP/IP must be bound to one or more adapters before running any of the tests. Nonskippable tests are still run. A detailed explanation of the switches can be found on the Netdiag Remarks page.

Valid TestName values are:

Value	Description
Autonet	Automatic Private IP Addressing (APIPA) address test. Tests whether APIPA is in use for the network adapters.
Bindings	Bindings test. Lists all bindings, including interface name, lower module name, upper module name, whether the binding is currently enabled, and the owner of the binding.
Browser	Redirector and Browser test. Lists the protocols bound to the Browser service and the redirector.
DcList	Domain controller list test. Obtains a list of domain controllers for the domain.
DefGw	Default gateway test. Attempts to contact each configured default gateway.
DNS	DNS test. Tests the availability of the configured DNS servers and verifies the current client's DNS registrations.
DsGetDc	Domain controller discovery test. First finds a generic domain controller from directory service, then finds the primary domain controller. Then, finds a Windows 2000 domain controller (DC). If the tested domain is the primary domain, checks whether the domain GUID stored in Local Security Authority (LSA) is the same as the domain GUID stored in the DC. If not, the test returns a fatal error; if the /fix option is on, DsGetDC tries to fix the GUID in LSA.
IpConfig	IP address configuration test. Enumerates the TCP/IP configuration information for each network adapter.
IpLoopBk	IP address loopback ping test. Pings the IP loopback address of 127.0.0.1 for each adapter.
IPSec	IP Security test. Tests whether IP Security is enabled and displays a list of active IP Security policies for the computer.
IPX	IPX test. Lists statistics for the IPX protocol installed on the computer.
Kerberos	Kerberos test. Checks whether the Kerberos package information is up-to-date.
Ldap	Lightweight Directory Access Protocl (LDAP) test. Contacts all available domain controllers and determines which LDAP authentication protocol is in use.
Member	Domain membership test. Checks to confirm details of the primary domain, including computer role, domain name, and domain GUID. Checks to see if NetLogon service is started, adds the primary domain to the domain list, and queries the primary domain security identifier (SID).
Modem	Modem diagnostics test. Lists configuration information for each modem found.
NbtNm	NetBT name test. Similar to the nbtstat -n command. It checks that the workstation service name `<00>` is equal to the computer name. It also checks that the messenger service name `<03>`, and server service name `<20>` are present on all interfaces and that none of these names are in conflict.
Ndis	Netcard queries test. Lists the network adapter configuration details, including the adapter name, configuration, media, globally unique identifier (GUID), and statistics. If this test shows an unresponsive network adapter, the remaining tests are aborted.
NetBTTransports	NetBT transports test. Lists the transport protocols that are bound to NetBT.
Netstat	Netstat information test. Lists protocol statistics and current TCP/IP connections.
Netware	Netware test. Queries the nearest Netware server for current login information.
Route	Routing table test. Lists static routes and whether they are persistent.
Trust	Trust relationship test. Tests trust relationships to the primary domain only if the computer is a member workstation, member server, or a Backup Domain Controller (BDC) domain controller that is not a PDC emulator. Checks that the primary domain security identifier (SID) is correct. Contacts an active DC. Connects to the SAM server on the DC. Uses the domain SID to open the domain to verify whether the domain SID is correct. Queries info of the secure channel for the primary domain. If the computer is a BDCDC, reconnects to the PDC emulator. If the computer is a member workstation or server, sets secure channel to each DC on the DC list for this domain.
WAN	Wide Area Network (WAN) configuration test. Lists settings and status on each COM port currently in use.
WINS	Windows Internet Name Service (WINS) service test. Tests the availability of the configured WINS server and the validity of the client registrations.
Winsock	Winsock test. Lists protocols and ports available to the WinSock service.

****/skip:TestName
Skips the test specified by TestName. Nonskippable tests will still run. Valid TestName values are:

Value	Description
Autonet	Automatic Private IP Addressing (APIPA) address test.
Bindings	Bindings test.
Browser	Redir and Browser test.
DcList	Domain controller list test.
DefGw	Default gateway test.
DNS	DNS test.
DsGetDc	Domain controller discovery test.
IpConfig	IP address configuration test.
IpLoopBk	IP address loopback ping test.
IPX	IPX test.
Kerberos	Kerberos test.
Ldap	Lightweight Directory Access Protocol (LDAP) test.
Modem	Modem diagnostics test.
NbtNm	NetBT name test.
Netstat	Netstat information test.
Netware	Netware test.
Route	Routing table test.
Trust	Trust relationship test.
WAN	Wide Area Network (WAN) configuration test.
WINS	Windows Internet Name Service (WINS) test.
Winsock	Winsock test.

次の方法で共有

Netdiag Syntax

NetDiag Syntax

Parameters

See Also

Concepts

その他のリソース