次の方法で共有


USB 3.0 Suspend Test

This test verifies that USB 3.0–compliant devices support Function and Selective Suspend properly. When a device is resumed from the selective suspend state, the device must retain a minimum set of device state information, as specified in section 9.2.5.2 of the USB 3.0 Specification. For more information about the USB 3.0 Specification, see USB Implementers Forum, Inc..

Test details

Associated requirements

Device.Connectivity.UsbDevices.FunctionSuspendSelectiveSuspend

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~2 minutes

Categories

Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Connectivity Testing.

 

 

Send comments about this topic to Microsoft