次の方法で共有

DMR supports changing the device's friendly name (NAME-01)

  • [アーティクル]

This test verifies that a digital media renderer (DMR) allows the user to update the DMR friendly name using any configuration method. The DMR friendly name is defined as the string value included in element friendlyName in the Device Description Document.

Test details

Associated requirements

Device.Media.DMR.Base.ChangingFriendlyName

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows 8 (x64) Windows 8 (x86) Windows 8.1 x64 Windows 8.1 x86

Expected run time

~5 minutes

Categories

Experiences

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Digital Media Renderer Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Media Testing.

More information

This test completes the following steps:

  1. Downloads the device description document for the DUT.

  2. Finds the presentation URL entry in the DDD.

  3. Validates the URL by downloading the page.

  4. Loads the page in Internet Explorer. If the URL is valid, prompt the user to change the friendly name.

  5. When the name is changed, the test job rediscovers the device under test and verifies that the name was changed.

Parameters

Parameter Description

WDKData_DeviceUUID

The Device ID

WDKData_MSCP

The MCSP

 

Command syntax

Command Description

NetMediaLogoTests.exe NETMEDIA_0018 /dmrID=[Query WDKData_DeviceUUID] /mcsp [WDKData_MSCP]

Runs the test.

 

Note  

For command-line help for this test binary, type /h.

 

File list

File Location

NetMediaLogoTests.exe

<testbinroot>\nttest\multimediatest\sharing\netmedialogotests

 

 

 

Send comments about this topic to Microsoft