次の方法で共有

Sensor DataReport Validation Test (System)

  • [アーティクル]

The data report of each sensor device is expected to have specific data fields and each data field must be a specific vartype. The test prompts the tester to put the sensor device into ready state and the data report is examined to validate the presence of the required data fields and correct vartypes.

This is a system-specific implementation of an existing test. For more information on this test, see Sensor DataReport Validation Test.

Test details

Associated requirements

System.Client.Sensor.Integrated

See the system hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86)

Expected run time

~2 minutes

Categories

Certification Functional

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.

If a GPS sensor exists in the system, perform the following steps:

  1. Confirm that you are running the tests in an environment in which you can receive a GPS signal.

  2. Make sure that you have enabled the Location Permissions on the target system and for the system user account under which the WHCK tests are being executed.

Troubleshooting

For troubleshooting information, see Troubleshooting System Client Testing.

 

 

Send comments about this topic to Microsoft