Hybrid Cache Performance Test (LOGO)
This test validates the performance of the cache by doing the following scenarios:
Sequential Read
Random Read (Queue Depth=1)
Random Read (Queue Depth=8)
Random Write (Queue Depth=1)
Random Write (Queue Depth=8)
Sequential Write
Test details
Associated requirements |
Device.Storage.Hd.Sata.HybridInformation.BasicFunction |
Platforms |
Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~30 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Hard Disk Drive Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Storage Testing.
More information
This test does the following:
Disables the cache.
Enables the cache. This effectively should clear out the entire cache.
Pin in data starting at offset 0 for a length of 4 GB with priority. This pin will be with reads. Additionally, after every GB the test waits until the hybrid log pages have stopped changing in a certain time frame. This is to allow the device to sync data into the cache so that the entire range gets pinned into the drive.
Changes the priority of all future I/O to the drive to not have any priority.
Start the speed test.