次の方法で共有

Configuring CLIENT2 (Windows Embedded CE 6.0)

  • [アーティクル]

1/6/2010

In the IPv6 test lab, configure CLIENT2 as a client computer.

To configure CLIENT2

  1. Configure the TCP/IP protocol using the following addresses:

    • IP address: 10.0.3.2
    • Subnet mask: 255.255.255.0
    • Default gateway: 10.0.3.1

    For more information, see Configuring a Device with a Static Address for the IPv6 Test Lab.

  2. Verify the integrity of the routing infrastructure by pinging 10.0.1.3 from the CLIENT2 computer. If there is no response to the ping, configure the network again.

    For more information, see Pinging a Host in the IPv6 Test Lab by Using a Link-Local Address.

See Also

Tasks

Creating the Run-Time Images for the IPv6 Test Lab

Concepts

How to Set Up and Use an IPv6 Test Lab