Route (Windows Embedded CE 6.0)
1/6/2010
The route utility allows you to view or modify network routing tables.
The syntax for the route utility is as follows.
ROUTE [-d] [-f] command [destination] [MASK netmask] [gateway]
[METRIC metric] [IF interface]
You can use the following options and parameters with the route utility:
- -d
Redirects the output to the output debug port.
- -f
Clears the routing tables of all gateway entries. If you use -f together with one of the commands, the tables are cleared before the command runs.
command
Specifies a command that you want to run. It is one of the following values.Command Description ADD
Adds a route.
DELETE
Deletes a route.
PRINT
Prints a route.
- destination
Specifies the address of the host.
- MASK
Specifies that the next parameter is the netmask value.
- netmask
Specifies a subnet mask value for this route entry. If you do not specify a value, the subnet mask is set to 255.255.255.255 by default.
- gateway
Specifies the address of the gateway.
- METRIC
Specifies that the next parameter is the metric value.
- metric
Specifies the metric, or cost, for the destination.
- IF
Specifies that the next parameter is the interface value. If you do not use the IF option, route tries to find the best interface for a given gateway.
- interface
Specifies the interface number for the route.
If you specify an invalid value for netmask, so that the result of a bitwise-AND operation between destination and netmask does not equal the value of destination, an error occurs. For example, if you use the following call for the route utility.
route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1
You receive the following error message.
The route addition failed: 87
The following code examples show several ways of calling the route utility.
route PRINT
route ADD 157.0.0.0 MASK 255.0.0.0 157.55.80.1 METRIC 3 IF 2
route DELETE 157.0.0.0
The following code example shows typical output from the route utility.
=============================================================================
Interface List
2 0 40 5 5b 8b 9e Novell 2000 Adapter.
=============================================================================
=============================================================================
Active Routes
The no. of entries is ::: 7
Destination Netmask GatewayAddress Interface Metric
----------------------------------------------------------------------------
224.0.0.0 224.0.0.0 157.56.148.199 157.56.148.199 1
0.0.0.0 0.0.0.0 157.56.148.1 157.56.148.199 1
157.56.148.199 255.255.255.255 127.0.0.1 127.0.0.1 1
157.56.255.255 255.255.255.255 157.56.148.199 157.56.148.199 1
157.56.148.0 255.255.252.0 157.56.148.199 157.56.148.199 1
255.255.255.255 255.255.255.255 157.56.148.199 157.56.148.199 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
=============================================================================