LINECONFIGDATA (Compact 2013)

3/26/2014

This structure specifies the configuration information for a modem line. It is used by the Unimodem Configuration dialog box.

Syntax

typedef struct _LINECONFIGDATA {
  DWORD dwVersion;
  DWORD dwBaudRate;
  DWORD dwSettableBaud;
  BYTE bByteSize;
  BYTE bParity;
  BYTE bStopBits;
  BYTE bReserved;
  WORD wSettableData;
  WORD wWaitBong;
  DWORD dwCallSetupFailTimer;
  DWORD dwModemOptions;
  DWORD dwTermOptions;
  DWORD dwDdevCapFlags;
  DWORD dwModMaxLen;
  TCHAR szDialModifier[NETUI_LCD_DIAL_MOD_LEN + 1];
  WORD wSettableStopParity;
} LINECONFIGDATA, *PLINECONFIGDATA;

Members

• dwVersion
  Specifies the version of the structure.

• dwBaudRate
  Specifies the baud rate of the connection, using CBR_* values listed in %_WINCEROOT%\Public\Sdk\Inc\Winbase.h, for example, CBR_110.

• dwSettableBaud
  Specifies the baud rates, using BAUD_* bit values from %_WINCEROOT%\Public\Sdk\Inc\Winbase.h.

• bByteSize
  Specifies the number of bits per byte, which can be from 4 to 8.

• bParity
  Specifies the parity of the connection. The following table shows the parity settings.

  Setting	Parity
  0	None
  1	Odd
  2	Even
  3	Mark
  4	Space

• bStopBits
  Specifies the number of stop bits. The following table shows the settings for stop bits.

  Setting	Stop bits
  0	1 stop bit
  1	1.5 stop bits
  2	2 stop bits

• bReserved
  Used for alignment purposes.

• wSettableData
  Indicates the number of data bits to be sent. The following table shows the supported values.

  Value	Description
  DATABITS_5	5 data bits
  DATABITS_6	6 data bits
  DATABITS_7	7 data bits
  DATABITS_8	8 data bits
  DATABITS_16	16 data bits
  DATABITS_16X	Special wide path through serial hardware lines

• wWaitBong
  Specifies the number of seconds to wait for a credit-card tone.

• dwCallSetupFailTimer
  Specifies the dial timeout value.

• dwModemOptions
  Specifies modem options. The following table shows the supported modem options.

  Value	Description
  NETUI_LCD_MDMOPT_SOFT_FLOW	Software flow control
  NETUI_LCD_MDMOPT_HARD_FLOW	Hardware flow control
  NETUI_LCD_MDMOPT_BLIND_DIAL	Blind dial
  NETUI_LCD_MDMOPT_AUTO_BAUD	Enables DCC automatic baud rate detection

• dwTermOptions
  Specifies the terminal type. The following table shows the supported terminal types.

  Terminal option	Terminal type
  NETUI_LCD_TRMOPT_MANUAL_DIAL	Manual dial
  NETUI_LCD_TRMOPT_PRE_DIAL	Predial
  NETUI_LCD_TRMPOT_POST_DIAL	Postdial

• dwDdevCapFlags
  Not supported.

• dwModMaxLen
  Specifies the length to allow user to edit. The length is the value specified for NETUI_LCD_DIAL_MOD_LEN.

• szDialModifier
  Specifies an optional modem command that is issued just after the modem has been initialized and just before the phone number is to be dialed.

• wSettableStopParity
  Specifies the stop bit and parity settings that can be selected. The following table shows the supported values.

  Value	Description
  PARITY_EVEN	Even parity
  PARITY_MARK	Mark parity
  PARITY_NONE	No parity
  PARITY_ODD	Odd parity
  PARITY_SPACE	Space parity
  STOPBITS_10	1 stop bit
  STOPBITS_15	1.5 stop bits
  STOPBITS_20	2 stop bits

Requirements

Header

netui.h

See Also

Reference

Network User Interface Structures
LineConfigEdit

Other Resources

COMMPROP