WZC_WLAN_CONFIG (Windows Embedded CE 6.0)
1/6/2010
This structure stores information about the preferred wireless zero configuration.
Syntax
typedef struct
{
ULONG Length;
DWORD dwCtlFlags;
NDIS_802_11_MAC_ADDRESS MacAddress;
UCHAR Reserved[2];
NDIS_802_11_SSID Ssid;
ULONG Privacy;
NDIS_802_11_RSSI Rssi;
NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
NDIS_802_11_CONFIGURATION Configuration;
NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
NDIS_802_11_RATES SupportedRates;
ULONG KeyIndex;
ULONG KeyLength;
UCHAR KeyMaterial[WZCCTL_MAX_WEPK_MATERIAL];
NDIS_802_11_AUTHENTICATION_MODE AuthenticationMode;
RAW_DATA rdUserData;
WZC_EAPOL_PARAMS EapolParams;
RAW_DATA rdNetworkData;
ULONG WPAMCastCipher;
ULONG ulMediaType;
} WZC_WLAN_CONFIG, *PWZC_WLAN_CONFIG;
Members
- Length
Length of WZC_WLAN_CONFIG.
dwCtlFlags
Control flags for the preferred configuration. The following table shows the possible values.Values Description WZCCTL_MAX_WEPK_MATERIAL
Size of the KeyMaterial array in the WZC_WLAN_CONFIG structure.
WZCCTL_WEPK_PRESENT (0x0001)
Determines whether the configuration includes a WEP key.
WZCCTL_WEPK_XFORMAT (0x0002)
The WEP Key material, if available, is entered as hexadecimal digits
WZCCTL_VOLATILE (0x0004)
Indicates that the configuration should not be stored.
WZCCTL_POLICY (0x0008)
Indicates that the configuration is enforced by the policy.
WZCCTL_ONEX_ENABLED (0x0010)
Indicates that 802.1X should be enabled for this configuration.
- MacAddress
MAC address of the associated access point. For more information, see NDIS_802_11_MAC_ADDRESS.
- Ssid
NIC service set identifier (SSID) value. For more information see, NDIS_802_11_SSID.
- Privacy
Wireless Equivalent Privacy (WEP) implementation status for a particular 802.11 NIC. The possible values are defined in the NDIS_802_11_WEP_STATUS enumeration.
- Rssi
Received signal strength indication (RSSI) in dB-milliwatts (dBm). For more information, see NDIS_802_11_RSSI.
- NetworkTypeInUse
Network subtype values for the physical layer of used with a specific driver. The possible values are defined in the NDIS_802_11_NETWORK_TYPE enumeration.
- Configuration
Configuration of the radio. For more information, see NDIS_802_11_CONFIGURATION.
- SupportedRates
Data rates. For more information, see NDIS_802_11_RATES.
- KeyIndex
802.11 WEP key index. The global keys are represented by values of 1 to n. Zero represents a per-client key. For more information about the key types, see OID_802_11_ADD_WEP.
- KeyLength
Specifies the length of KeyMaterial character array in bytes.
- KeyMaterial
Variable length depending on KeyLength. Set to the values defined in Pre-allocated to WZCCTL_MAX_WEPK_MATERIAL.
- AuthenticationMode
802.11 authentication mode value. For more information about the possible authentication values, see NDIS_802_11_AUTHENTICATION_MODE.
- rdUserData
Not used.
- EapolParams
Contains information about 802.1x authentication. For more information, see WZC_EAPOL_PARAMS.
- rdNetworkData
Not used.
- WPAMCastCipher
Multicast Cipher Suite for WPA. The possible values are defined in NDIS_802_11_WEP_STATUS. The applications need not set this member.
- ulMediaType
NDIS media types that the NIC currently uses. When queried, the value of this member is NdisMedium802_3 as defined in Ndispnp.h. For information about media types, see OID_GEN_MEDIA_IN_USE.
Remarks
The RAW_DATA structure is defined in Wzcapi.h as follows:
typedef struct
{
DWORD dwDataLen;
LPBYTE pData;
} RAW_DATA, *PRAW_DATA;
The pData member points to binary data. The dwDataLen indicates the number of bytes pointed by pData.
Requirements
| Header | wzcsapi.h |
| Windows Embedded CE | Windows CE .NET 4.2 and later |