LPISSUE_VENDOR_TRANSFER (Compact 2013)

3/26/2014

This function sends a vendor-specific control transfer to a universal serial bus (USB) device.

Syntax

typedef USB_TRANSFER (* LPISSUE_VENDOR_TRANSFER)(
  USB_HANDLE hDevice,
  LPTRANSFER_NOTIFY_ROUTINE lpStartAddress,
  LPVOID lpvNotifyParameter, 
  DWORD dwFlags,
  LPCUSB_DEVICE_REQUEST lpControlHeader,
  LPVOID lpvBuffer,
  ULONG uBufferPhysicalAddress
);

Parameters

• hDevice
  [in] Handle to a USB device.

• lpStartAddress
  [in] Pointer to the address, which might be NULL, of a callback routine of type LPTRANSFER_NOTIFY_ROUTINE.

• lpvNotifyParameter
  [in] Pointer to the parameter to pass to a callback routine.

• dwFlags
  [in] Flags for the transfer. These flags shown in the following list are declared in the Usbtypes.h header file.

  • USB_IN_TRANSFER
  • USB_OUT_TRANSFER
  • USB_NO_WAIT
  • USB_SHORT_TRANSFER_OK
  • USB_START_ISOCH_ASAP
  • USB_COMPRESS_ISOCH
  • USB_SEND_TO_DEVICE
  • USB_SEND_TO_INTERFACE
  • USB_SEND_TO_ENDPOINT
  • USB_DONT_BLOCK_FOR_MEM

• lpControlHeader
  [in] Pointer to a device request header.

• lpvBuffer
  [in] Data buffer. If a physical buffer address is specified, this must contain the virtual address of the buffer.

• uBufferPhysicalAddress
  [in] Physical address, which might be NULL, of the data buffer.

Return Value

A USB_TRANSFER handle indicates success. NULL indicates failure.

Remarks

This function initiates a control transfer to a USB device on the default endpoint, zero (0). This function is intended for vendor-specific transfers. For standard transfers, use a corresponding function, such as LPGET_INTERFACE or LPSET_INTERFACE.

Requirements

Header

usbdi.h

See Also

Reference

USB Driver Functions
LPABORT_TRANSFER
LPGET_INTERFACE
LPGET_TRANSFER_STATUS
LPIS_TRANSFER_COMPLETE
LPSET_INTERFACE
LPTRANSFER_NOTIFY_ROUTINE