次の方法で共有

Windows Embedded CE Boot Loader Output for the Texas Instruments SDP2420 Development Board (Windows Embedded CE 6.0)

  • [アーティクル]

1/5/2010

This is the output for the Windows Embedded CE boot loader:

NAND X-Loader for OMAP2420 H4-Sample...

Microsoft Windows CE Bootloader Common Library Version 1.3 Built Aug 10 2006 09:01:35
Microsoft Windows CE EBOOT 1.0 for OMAP2420 H4-Sample. Built Aug 10 2006 at 09:03:42
INFO: Platform Init**
+OMAPLCDOpen

Screen Paint
-OMAPLCDOpen
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found
INFO: MAC found
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
LAN91Cxxx: Chip Id 4 Revision 9
INFO: Boot device uses MAC 08:00:29:01:10:2c
INFO: *** Device Name H4-65CAA06E ***
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 192.168.1.2

ProcessDHCP()::DHCP IP Address Resolved as 192.168.1.2, netmask: 255.255.255.0
Lease time: 43200 seconds
Got Response from DHCP server, IP address: 192.168.1.2
No ARP response in 2 seconds, assuming ownership of 192.168.1.2
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255

If you press the SPACEBAR to break into the configuration menu, you see the following output:

---------------------------------------------------------------------
 Main Menu
---------------------------------------------------------------------
 [1] Show Current Settings
 [2] Select Boot Device
 [3] Select Debug Device
 [4] Network Settings
 [5] NAND/NOR Flash
 [6] Modem Debug Setting
 [7] Save Settings
 [0] Exit and Continue

 Selection:

See Also

Tasks

How to Use the BSP for the Texas Instruments SDP2420 Development Board
Downloading the Boot Loader to the Texas Instruments SDP2420 Development Board