次の方法で共有


How to Use the BSP for the Renesas US7750R HARP (Aspen) SDB (Windows Embedded CE 6.0)

1/5/2010

You can use the sample board support package (BSP) provided by Windows Embedded CE 6.0 for the Renesas US7750R HARP (Aspen) standard development board (SDB) to quickly evaluate Windows Embedded CE operating system (OS) features.

An SDB is a hardware development system with which you can develop and test your OS design using a wide range of processors and peripherals. For more information, see Standard Development Board Design.

For more information about the sample BSPs included in Windows Embedded CE for SHx microprocessors, see SHx BSPs.

Hardware and Software Assumptions

  • You included support for SH4 microprocessors when you installed Platform Builder. If you did not, reinstall Platform Builder and include support for the SH4 microprocessor.
  • You are downloading a Windows Embedded CE run-time image to a Renesas US7750R HARP (Aspen) SDB.

To use the BSP for the Renesas US7750R HARP (Aspen) SDB, follow the steps in the table below.

Step Topic

1. From the Windows Embedded CE 6.0 OS Design Wizard, select the Renesas US7750R HARP SDB: SH4 BSP.

If you are not sure which configuration to use, select the Renesas US7750R HARP (Aspen) SDB BSP, the PDA Device design template, and the Enterprise Web Pad variant.

Accept the defaults for the other pages of the wizards.

Creating an OS Design with the Windows Embedded CE OS Design Wizard

2. Review the supported hardware and software features on the SDB and familiarize yourself with any limitations that might impact your run-time image on the SDB.

Renesas US7750R HARP (Aspen) SDB Supported Features

3. Set up the SDB.

Setting Up the Renesas US7750R HARP (Aspen) SDB Hardware

4. Modify the switch and jumper settings on the SDB.

Modifying the Renesas US7750R HARP (Aspen) SDB Switches and Jumpers

5. Configure the Microsoft HyperTerminal application to receive debug messages.

Configuring HyperTerminal for BSPs

6. Build the run-time image.

You must build the run-time image before you can download it to the SDB.

Building a Run-Time Image

7. Download the Ethernet boot loader to ROM or flash the SDB.

Downloading the Boot Loader to the Renesas US7750R HARP (Aspen) SDB

8. Download the run-time image to the SDB.

Downloading the Run-Time Image to the Renesas US7750R HARP (Aspen) SDB

See Also

Concepts

SHx BSPs
Supported Board Support Packages
Standard Development Board Design