OEMFlushCache (Windows Embedded CE 6.0)
1/5/2010
This function is called by the kernel in response to a CacheSync function request.
Syntax
_OEMFlushCache PROC NEAR PUBLIC
Parameters
None.
Return Value
None.
Remarks
OEMFlushCache writes back and invalidates, or flushes, the cache. However, on x86 platforms the cache is fairly sophisticated and coherent even when you write to uncached addresses; therefore, a cache flush is not needed. The write-back portion of a flush causes the cache lines to be written to memory and completed before the function returns.
On x86, the file system is in write-through mode, so you only need to be sure that the write buffers on the write-through cache are drained. If you do not, the write-through cache is free to slowly drain the write buffers and you cannot guarantee the transacted file system.
Note
Only x86 can optimize in this manner.
Example Code
_OEMFlushCache PROC NEAR PUBLIC
;Read an UNCACHED address to serialize. No actual cache flush required.
;
mov eax, DWORD PTR ds:0A0000000h xor eax, eax ret
_OEMFlushCache ENDP
Requirements
| Header | Developer Implemented |
| Library | OEMMain.lib or OEMMain_StaticKITL.lib |
| Windows Embedded CE | Windows CE 3.0 and later |
See Also
Tasks
Reference
Concepts
Cache Flush Routines
Resume State