Standard Return Values
The Network Load Balancing Provider communicates status and error information as follows:
- All WMI operations that produce an error create an __ExtendedStatus object. Depending on the source of the error, the StatusCode property of the __ExtendedStatus object may contain one of the values listed below.
- The MicrosoftNLB_Node methods also generate the following values which are returned through the ReturnValue property of IWbemClassObject.
| Value | Error code | Description |
|---|---|---|
| 1000 |
WLBS_OK |
The operation completed successfully. |
| 1001 |
WLBS_ALREADY |
The specified target is already in the state that the requested operation would produce. |
| 1002 |
WLBS_DRAIN_STOP |
One or more nodes reported a drain stop operation. |
| 1003 |
WLBS_BAD_PARAMS |
Bad configuration parameters in a node's registry prevented the node from starting cluster operations. |
| 1004 |
WLBS_NOT_FOUND |
The specified port number was not found in any port rule. |
| 1005 |
WLBS_STOPPED |
Cluster operations have stopped on at least one node. |
| 1006 |
WLBS_CONVERGING |
The cluster is converging. |
| 1007 |
WLBS_CONVERGED |
The cluster has converged successfully. |
| 1008 |
WLBS_DEFAULT |
The specified node has converged as the default host. |
| 1009 |
WLBS_DRAINING |
One or more nodes are draining. |
| 1013 |
WLBS_SUSPENDED |
Cluster operations have been suspended on one or more nodes. |
| 1014 |
WLBS_MEDIA_DISCONNECTED |
The network adapter cable is disconnected. |
| 1050 |
WLBS_REBOOT |
The node must be rebooted for the specified configuration changes to take effect. |
| 1100 |
WLBS_INIT_ERROR |
An internal error prevented initialization of the cluster control module. |
| 1101 |
WLBS_BAD_PASSW |
The specified password was not accepted by the cluster. |
| 1102 |
WLBS_IO_ERROR |
A local I/O error prevents communication with the Network Load Balancing driver. |
| 1103 |
WLBS_TIMEOUT |
The requested operation timed out without receiving a response from the specified node. |
| 1150 |
WLBS_PORT_OVERLAP |
At least one of the port numbers in the specified port rule is currently listed in at least one other port rule. |
| 1151 |
WLBS_BAD_PORT_PARAMS |
The settings for one or more port rules contain one or more invalid values. |
| 1152 |
WLBS_MAX_PORT_RULES |
The cluster contains the maximum number of port rules. |
| 1153 |
WLBS_TRUNCATED |
The return value has been truncated. |
| 1154 |
WLBS_REG_ERROR |
An internal registry access error occurred. |