IBDA_DiseqCommand interface (bdaiface.h)
[The feature associated with this page, Microsoft TV Technologies, is a legacy feature. Microsoft strongly recommends that new code does not use this feature.]
Controls cable television satellite equipment, using Digital Satellite Equipment Control (DiSEqC) commands.
Inheritance
The IBDA_DiseqCommand interface inherits from the IUnknown interface. IBDA_DiseqCommand also has these types of members:
Methods
The IBDA_DiseqCommand interface has these methods.
| IBDA_DiseqCommand::get_DiseqResponse Gets the driver's response to a Digital Satellite Equipment Control (DiSEqC) command. |
| IBDA_DiseqCommand::put_DiseqLNBSource Sets the low-noise block (LNB) converter source. |
| IBDA_DiseqCommand::put_DiseqRepeats Enables or disables repeated Digital Satellite Equipment Control (DiSEqC) commands. |
| IBDA_DiseqCommand::put_DiseqSendCommand Sends a Digital Satellite Equipment Control (DiSEqC) command. |
| IBDA_DiseqCommand::put_DiseqUseToneBurst Enables or disables Tone-Burst commands. |
| IBDA_DiseqCommand::put_EnableDiseqCommands Enables or disables the use of Digital Satellite Equipment Control (DiSEqC) commands. |
Remarks
Depending on the cable television equipment in use, this interface can be used to select the LNB converter source, move a motor dish, or control radio frequency (RF) switching equipment.
To declare the interface identifier (IID) for this interface, use the __uuidof operator: __uuidof(IBDA_DiseqCommand).
Requirements
| Requirement | Value |
|---|---|
| Target Platform | Windows |
| Header | bdaiface.h |