編集

次の方法で共有


Add-VpnS2SInterface

Create a S2S interface with the specified parameters.

Syntax

Add-VpnS2SInterface
   [-Name] <String>
   [-Protocol <String>]
   [-Destination] <String[]>
   [-AdminStatus <Boolean>]
   [-PromoteAlternate <Boolean>]
   [-AuthenticationMethod <String>]
   [-PostConnectionIPv4Subnet <String[]>]
   [-PostConnectionIPv6Subnet <String[]>]
   [-InitiateConfigPayload <Boolean>]
   [-RadiusAttributeClass <String>]
   [-EnableQoS <EnableQoS>]
   [-TxBandwidthKbps <UInt64>]
   [-RxBandwidthKbps <UInt64>]
   [-IPv4TriggerFilter <String[]>]
   [-IPv6TriggerFilter <String[]>]
   [-Persistent]
   [-AutoConnectEnabled <Boolean>]
   [-IPv4TriggerFilterAction <Action>]
   [-IPv6TriggerFilterAction <Action>]
   [-SADataSizeForRenegotiationKilobytes <UInt32>]
   [-IPv4Subnet <String[]>]
   [-IPv6Subnet <String[]>]
   [-ResponderAuthenticationMethod <String>]
   [-PassThru]
   [[-RoutingDomain] <String>]
   [-Certificate <X509Certificate2>]
   [-SharedSecret <String>]
   [-NetworkOutageTimeSeconds <UInt32>]
   [-NumberOfTries <UInt32>]
   [-RetryIntervalSeconds <UInt32>]
   [-SALifeTimeSeconds <UInt32>]
   [-MMSALifeTimeSeconds <UInt32>]
   [-EapMethod <String>]
   [-InternalIPv4 <Boolean>]
   [-InternalIPv6 <Boolean>]
   [-IdleDisconnectSeconds <UInt32>]
   [-UserName <String>]
   [-Password <String>]
   [-SourceIpAddress <String>]
   [-LocalVpnTrafficSelector <CimInstance[]>]
   [-RemoteVpnTrafficSelector <CimInstance[]>]
   [-EncryptionType <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Add-VpnS2SInterface
   [-Name] <String>
   [-Destination] <String[]>
   [-AdminStatus <Boolean>]
   [-EnableQoS <EnableQoS>]
   [-TxBandwidthKbps <UInt64>]
   [-RxBandwidthKbps <UInt64>]
   [-IPv4Subnet <String[]>]
   [-IPv6Subnet <String[]>]
   [-PassThru]
   [[-RoutingDomain] <String>]
   [-InternalIPv4 <Boolean>]
   [-InternalIPv6 <Boolean>]
   -SourceIpAddress <String>
   [[-GreKey] <UInt32>]
   [-GreTunnel]
   [-IPv4Address <String>]
   [-IPv6Address <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Add-VpnS2SInterface
   [-Name] <String>
   [-Protocol <String>]
   [-Destination] <String[]>
   [-AdminStatus <Boolean>]
   [-PromoteAlternate <Boolean>]
   [-AuthenticationMethod <String>]
   [-PostConnectionIPv4Subnet <String[]>]
   [-PostConnectionIPv6Subnet <String[]>]
   [-InitiateConfigPayload <Boolean>]
   [-RadiusAttributeClass <String>]
   [-EnableQoS <EnableQoS>]
   [-TxBandwidthKbps <UInt64>]
   [-RxBandwidthKbps <UInt64>]
   [-IPv4TriggerFilter <String[]>]
   [-IPv6TriggerFilter <String[]>]
   [-Persistent]
   [-AutoConnectEnabled <Boolean>]
   [-IPv4TriggerFilterAction <Action>]
   [-IPv6TriggerFilterAction <Action>]
   [-SADataSizeForRenegotiationKilobytes <UInt32>]
   [-IPv4Subnet <String[]>]
   [-IPv6Subnet <String[]>]
   [-ResponderAuthenticationMethod <String>]
   [-PassThru]
   [[-RoutingDomain] <String>]
   [-Certificate <X509Certificate2>]
   [-SharedSecret <String>]
   [-NetworkOutageTimeSeconds <UInt32>]
   [-NumberOfTries <UInt32>]
   [-RetryIntervalSeconds <UInt32>]
   [-SALifeTimeSeconds <UInt32>]
   [-MMSALifeTimeSeconds <UInt32>]
   [-EapMethod <String>]
   [-InternalIPv4 <Boolean>]
   [-InternalIPv6 <Boolean>]
   [-IdleDisconnectSeconds <UInt32>]
   [-UserName <String>]
   [-Password <String>]
   [-CustomPolicy]
   [-EncryptionMethod <EncryptionMethod>]
   [-IntegrityCheckMethod <IntegrityCheckMethod>]
   [-CipherTransformConstants <CipherTransformConstants>]
   [-AuthenticationTransformConstants <AuthenticationTransformConstants>]
   [-PfsGroup <PfsGroup>]
   [-DHGroup <DHGroup>]
   [-SourceIpAddress <String>]
   [-LocalVpnTrafficSelector <CimInstance[]>]
   [-RemoteVpnTrafficSelector <CimInstance[]>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Add-VpnS2SInterface cmdlet creates a site-to-site (S2S) interface with the specified parameters to customize Internet Protocol security (IPsec) settings. If the Protocol parameter is set to AutomaticOnly the only authentication method allowed is username. If the authentication method is a pre-shared key, only one interface can be enabled per destination and the initiator and responder policies are governed by what is specified per interface. If the authentication method is username or machine certificates, only initiator policies are governed by what is specified per interface, responder policies are governed by what is specified on the server. For incoming connections:

-- If the authentication method is a pre-shared key, the interface whose destination IP matches the incoming IP is activated.

  • If the authentication method is username, the interface whose name matches the username is activated.
  • If the authentication method is certificates the interface whose name matches the certificate subject name is activated.

Examples

Example 1: Create a S2S VPN interface

PS C:\>Add-VpnS2SInterface -Name "EDGE1" 131.107.0.20 -Protocol IKEv2 -AuthenticationMethod PSKOnly -SharedSecret "ABC" -IPv4Subnet 10.2.0.0/24:100 -IPv6Subnet 2001:db8:2::/48:100

This command creates a site-to-site VPN interface by name EDGE1 to destination 131.107.0.20. The protocol is IKEv2 and the authentication method is pre-shared key named ABC. Traffic to 10.2.0.0/24 and subnet 2001:db8:2::/48 is sent over this interface if there is no other interface on the server that has same routes with metric less than 100 . In case the interface is in disconnected state the connection is triggered if there is no other interface on the server that has same routes with metric less than 100.

Example 2: Create an interface that uses EAP authentication

PS C:\>Add-VpnS2SInterface -IPv4Subnet @("131.0.1.0/24:254", "121.0.0.0/16:124") -UserName "abc@contoso.com" -Destination "30.0.0.1" -IPv6Subnet @("3ffe::/32:24", "2ffe::/32:24") -AuthenticationMethod "EAP" -Name "TestVpnS2SInterface" -RetryInterval 120 -EncryptionType "RequireEncryption" -InternalIPv4 1 -InternalIPv6 1 -NumberofTries 20 -AdminStatus $True -IdleDisconnectSeconds 300 -PromoteAlternate $True -Password "1111_aaaa" -PassThru
Name                 Destination          AdminStatus  ConnectionState IPv4Subnet
----                 -----------          -----------  --------------- ----------
TestVpnS2SInterface  {30.0.0.1}           True         Disconnected    {131.0.1.0/24:254, 121.0.0.0/16:124}

This command creates an interface that uses EAP authentication method and multiple subnets are routed on this interface 131.0.1.0/24, 121.0.0.0/16.

Example 3: Add an IKEv2 S2S VPN interface

PS C:\>Add-VpnS2SInterface -RoutingDomain Rd_001 -Name "Blue-Tunnel-2" -Protocol IKEv2 -Destination 100.0.0.7 -AuthenticationMethod PSKOnly -SharedSecret 111_aaa -Persistent -IPv4Subnet 172.23.90.4/32:100 -PassThru
RoutingDomain   Name                 Destination          AdminStatus  ConnectionState IPv4Subnet
-------------   ----                 -----------          -----------  --------------- ----------
Rd_001          Blue-Tunnel-2        {100.0.0.7}          True         Disconnected    {172.23.90.4/32:100}

This command adds an IKEv2 S2S VPN (Demand-Dial) interface to the Multi-Tenant Gateway for Routing Domain Rd_001

Example 4: Add a Gre Tunnel interface

PS C:\>Add-VpnS2SInterface -GreTunnel -GreKey "1234" -RoutingDomain Rd_001 -Name "Blue-Tunnel-3" -Destination 100.0.0.8 -Persistent -IPv4Subnet 172.23.90.4/32:100 -PassThru
RoutingDomain   Name                 Destination          AdminStatus  ConnectionState IPv4Subnet
-------------   ----                 -----------          -----------  --------------- ----------
Rd_001          Blue-Tunnel-3        {100.0.0.8}          True         Connected    {172.23.90.4/32:100}

This command adds a Gre Tunnel interface to the Multi-Tenant Gateway for Routing Domain named Rd_001.

Example 5: Add an IKEv2 S2S VPN interface with Traffic Selectors

PS C:\>Add-VpnS2SInterface -RoutingDomain Rd_001 -Name "Blue-Tunnel-2" -Protocol IKEv2 -Destination 100.0.0.7 -AuthenticationMethod PSKOnly -SharedSecret 111_aaa -Persistent -IPv4Subnet 172.23.90.4/32:100 -LocalVpnTrafficSelector $localTSObject -RemoteVpnTrafficSelector $RemoteTSObject -PassThru | fl *
IPv4TriggerFilterAction          : 
IPv6TriggerFilterAction          : 
Certificate                      : 
EnableQoS                        : Enabled
AdminStatus                      : True
AuthenticationMethod             : PSKOnly
ConnectionState                  : Connected
Destination                      : {100.0.0.7}
EapMethod                        : 
IdleDisconnect                   : 500
InitiateConfigPayload            : True
InterfaceType                    : FullRouter
InternalIPv4                     : True
InternalIPv6                     : True
IPv4Subnet                       : {172.23.90.4/32:100}
IPv4TriggerFilter                : 
IPv6Subnet                       : 
IPv6TriggerFilter                : 
LastError                        : 0
LocalVpnTrafficSelector          : {VpnTrafficSelector}
MMSALifeTime                     : 28800
Name                             : Blue-Tunnel-2_9e8ddf33-cadc-48bd-861b-150311c53c9a
NetworkOutageTime                : 15
NumberOfTries                    : 3
Persistent                       : False
PostConnectionIPv4Subnet         : 
PostConnectionIPv6Subnet         : 
PromoteAlternate                 : False
Protocol                         : Ikev2
RemoteVpnTrafficSelector         : {VpnTrafficSelector}
ResponderAuthenticationMethod    : PSKOnly
RetryInterval                    : 60
RxBandwidthKbps                  : 0
SADataSizeForRenegotiation       : 33553408
SALifeTime                       : 3600
SourceIpAddress                  : 
TxBandwidthKbps                  : 0
UnReachabilityReasons            : 
UserName                         : 
RoutingDomain                    : Rd_001_fa3a844e-c397-4004-9c48-547ce397fe59
PSComputerName                   :

This command adds an IKEv2 S2S VPN (Demand-Dial) interface to the Multi-Tenant Gateway for Routing Domain Rd_001.

Parameters

-AdminStatus

Specifies the administrator status of the cmdlet.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AuthenticationMethod

Specifies the AuthenticationMethod to be used by the S2S connection. If a pre-shared key is specified as authentication method, there can only be one active site to site virtual private network (VPN) interface per destination IP address.

Type:String
Accepted values:EAP, MachineCertificates, PSKOnly, MSCHAPv2,
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AuthenticationTransformConstants

Specifies the authentication transform plumbed in IPsec policy.

Type:AuthenticationTransformConstants
Aliases:FirstTransformType, AuthenticationTransformConstant
Accepted values:MD596, SHA196, SHA256128, GCMAES128, GCMAES192, GCMAES256, None
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AutoConnectEnabled

Specifies the activation of auto-reconnection.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Certificate

Specifies the certificate to be used in default store. Applicable only if AuthenticationMethod is set to MachineCert.

Type:X509Certificate2
Aliases:Cert
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CipherTransformConstants

Specifies the cipher plumbed in IPsec policy.

Type:CipherTransformConstants
Aliases:OtherCipherAlgorithm, FirstCipherAlgorithm, CipherTransformConstant
Accepted values:DES, DES3, AES128, AES192, AES256, GCMAES128, GCMAES192, GCMAES256, None
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CustomPolicy

Specifies the custom IKE IPsec policy.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-Destination

Specifies the destination end-point of the S2S connection.

Type:String[]
Aliases:RemoteTunnelEndpoint, RemoteTunnelHostname, RemoteAddress
Position:2
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-DHGroup

Specifies the Diffie-Hellman (DH) Group to use during IKE key exchanges. Acceptable values for this parameter are:

  • None
  • Group1
  • Group2
  • Group14
  • ECP256
  • ECP384
  • Group24
Type:DHGroup
Accepted values:None, Group1, Group2, Group14, ECP256, ECP384, Group24
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-EapMethod

Specifies EAP method if IkeLocalAuthenticationMethod is EAP.

Type:String
Accepted values:EAP-TLS, EAP-PEAP, EAP-MSCHAPv2,
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-EnableQoS

Indicates whether to enable Quality of Service (QoS) on an interface. The acceptable values for this parameter are:

  • Enabled
  • Disabled
Type:EnableQoS
Accepted values:Disabled, Enabled
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-EncryptionMethod

Specifies the encryption method in the IKE policy.

Type:EncryptionMethod
Aliases:Encryption
Accepted values:DES, DES3, AES128, AES192, AES256
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-EncryptionType

Specifies the type of encryption. The acceptable values for this parameter are:

  • NoEncryption
  • RequireEncryption
  • OptionalEncryption
  • MaximumEncryption
Type:String
Accepted values:NoEncryption, RequireEncryption, OptionalEncryption, MaximumEncryption
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-GreKey

Specifies individual traffic flows within a Generic Routing Encapsulation (GRE) tunnel.

Type:UInt32
Position:4
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-GreTunnel

Indicates whether this cmdlet uses the GRE tunnel capability for the Windows Server Gateway.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-IdleDisconnectSeconds

Specifies a value that specifies the time, in seconds, after which an idle connection is terminated. Unless the idle time-out is disabled, the entire connection is terminated if the connection is idle for the specified interval.

Type:UInt32
Aliases:IdleDurationSeconds, IdleDisconnectSec
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-InitiateConfigPayload

Indicates whether to initiate configuration payload negotiation.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IntegrityCheckMethod

Specifies the integrity method plumbed in IPsec policy.

Type:IntegrityCheckMethod
Aliases:OtherHashAlgorithm, FirstIntegrityAlgorithm
Accepted values:MD5, SHA1, SHA256, SHA384
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-InternalIPv4

Specifies Negotiation of IPv4 Address.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-InternalIPv6

Specifies negotiation of IPv6 Address.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv4Address

Indicates whether the cmdlet sets custom IKE IPsec policies.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv4Subnet

Specifies the IPv4 subnet that is routed on this connection with metric.

Type:String[]
Aliases:IPv4TriggerSubnet
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv4TriggerFilter

Specifies a string array of IPv4 filters that trigger demand dial connections.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv4TriggerFilterAction

Indicates whether a filter should trigger an S2S connection.

Type:Action
Accepted values:Allow, Deny
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv6Address

Indicates whether the cmdlet sets custom IKE IPsec policies.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv6Subnet

Specifies the IPv6 subnet that is routed on this connection with metric.

Type:String[]
Aliases:IPv6TriggerSubnet
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv6TriggerFilter

Specifies an array of IPv6 filters that trigger demand dial connections.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IPv6TriggerFilterAction

Indicates whether a filter should trigger an S2S connection.

Type:Action
Accepted values:Allow, Deny
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-LocalVpnTrafficSelector

Specifies the initiator Traffic Selector object.

Type:CimInstance[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-MMSALifeTimeSeconds

Specifies the lifetime of main mode security association in seconds, after which the main mode security association is no longer valid.

Type:UInt32
Aliases:MMSaLifeTimeSec
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Name

Specifies the name of the connection.

Type:String
Aliases:ElementName
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-NetworkOutageTimeSeconds

Specifies the maximum network outage time after which the connection is disconnected. Acceptable values for this parameter are:

  • 6
  • 9
  • 12
  • 15
  • 30
  • 60
  • 120
  • 240
  • 360
  • 720
  • 900
Type:UInt32
Aliases:NetworkOutageTimeSec
Accepted values:3, 6, 9, 12, 15, 30, 60, 120, 240, 360, 720, 900
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NumberOfTries

Specifies the number of tries the connection is retried. If you specify 0, the cmdlet will retry infinitely.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Password

Specifies the password of the username to be used for dialing the connection. Applicable only if AuthenticationMethod is set to EAP.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Persistent

Indicates whether the connection state is persisted across the service restart or system reboots.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PfsGroup

Specifies the perfect forward secrecy (PFS) Group plumbed in IPsec policy.

Type:PfsGroup
Aliases:PfsGroupId
Accepted values:None, PFS1, PFS2, PFS2048, ECP256, ECP384, PFSMM, PFS24
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PostConnectionIPv4Subnet

Specifies the IPv4 subnet routes that are added to a site-to-site interface after the connection is established. The values specified are not used to initiate the site-to-site VPN connection.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PostConnectionIPv6Subnet

Specifies the IPv6 subnet routes that are added to a site-to-site interface after the connection is established. The values specified are not used to initiate the site-to-site VPN connection.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PromoteAlternate

Specifies that an alternate IP address that connects successfully becomes the primary IP address, and the current primary IP address is moved to the alternate list.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Protocol

Specifies the underlying protocol.

Type:String
Aliases:KeyModule
Accepted values:L2TP, IKEv2, Automatic, SSTP
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-RadiusAttributeClass

Specifies a RADIUS attribute.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-RemoteVpnTrafficSelector

Specifies the responder traffic selector object.

Type:CimInstance[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ResponderAuthenticationMethod

Specifies the responder AuthenticationMethod to be used by the S2S connection.

Type:String
Accepted values:MachineCertificates, PSKOnly,
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-RetryIntervalSeconds

Number of seconds between retries.

Type:UInt32
Aliases:RetryIntervalSec
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-RoutingDomain

Specifies an ID, as a string, for a routing domain. The ID of a routing domain is a user-defined alphanumeric string.

Type:String
Aliases:RoutingDomainName
Position:3
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-RxBandwidthKbps

Specifies the receive bandwidth limit, in kilobits per second (Kbps).

Type:UInt64
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-SADataSizeForRenegotiationKilobytes

Specifies the number of kilobytes that are allowed to transfer using a security association (SA). After that the SA will be renegotiated

Type:UInt32
Aliases:SaRenegotiationDataSizeKB, LifeTimeKiloBytes
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-SALifeTimeSeconds

Lifetime of an SA in seconds, after which the SA is no longer valid

Type:UInt32
Aliases:SaLifeTimeSec, LifeTimeSeconds, QMSALifeTimeSeconds
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-SharedSecret

Specifies the text of the shared secret to be used in dialing the connection. This is only applicable if AuthenticationMethod is set to PSK.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SourceIpAddress

Specifies the source IPv4 or IPv6 addresses to use when dialing the connection.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent connections that can be established to run this command. If you omit this parameter or enter a value of 0, the default value, 32, is used.

The throttle limit applies only to the current command, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-TxBandwidthKbps

Specifies a transmit bandwidth limit, in Kbps, for the interface.

Type:UInt64
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-UserName

Specifies the username to be used for dialing this connection. This is only applicable if the AuthenticationMethod parameter is set to EAP.

Type:String
Aliases:User
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

String

String[]

Boolean

Nullable<T>[[Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.EnableQoS, Microsoft.PowerShell.Cmdletization.GeneratedTypes, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null]]

Nullable<T>[[System.UInt64, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

SwitchParameter

Nullable<T>[[Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.Action, Microsoft.PowerShell.Cmdletization.GeneratedTypes, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null]]

UInt32

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.EncryptionMethod

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.IntegrityCheckMethod

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.CipherTransformConstants

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.AuthenticationTransformConstants

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.PfsGroup

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.DHGroup

CimInstance[]

Nullable<T>[[System.UInt32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

Outputs

CimInstance

CimInstance