Install-NetworkControllerCluster

Reference

Module:: NetworkController

Creates a Network Controller cluster.

Syntax

Install-NetworkControllerCluster
       -Node <NetworkControllerNode[]>
       -ClusterAuthentication <ClusterAuthentication>
       [-ManagementSecurityGroup <String>]
       [-DiagnosticLogLocation <String>]
       [-LogLocationCredential <PSCredential>]
       [-CredentialEncryptionCertificate <X509Certificate2>]
       [-GmsaAccountName <String>]
       [-LogTimeLimitInDays <UInt32>]
       [-LogSizeLimitInMBs <UInt32>]
       [-EnableAutomaticUpdates <Boolean>]
       [-Force]
       [-UseSsl]
       [-Credential <PSCredential>]
       [-CertificateThumbprint <String>]
       [-WhatIf]
       [-Confirm]
       [<CommonParameters>]

Description

The Install-NetworkControllerCluster cmdlet creates a Network Controller cluster. Configuration of the Network Controller involves creating a Network Controller cluster and then creating a Network Controller application on top of the cluster. You can create a Network Controller application by calling the Install-NetworkController cmdlet.

You can configure a Network Controller using the following steps:

Install the Network Controller role on all the computers that will be Network Controllers in your deployment.
Run the New-NetworkControllerNodeObject cmdlet to enter the details of the node. Repeat this step for all the computers that belong to the deployment. The next step uses these node objects.
Run the Install-NetworkControllerCluster cmdlet to create a Network Controller cluster.
Run the Install-NetworkController cmdlet to create the Network Controller application for the cluster.

Examples

Example 1: Install a Network Controller cluster in a test deployment

PS C:\> $NodeObject = New-NetworkControllerNodeObject -Name "Node1" -Server "NCNode1" -FaultDomain "fd:/rack1/host1" -RestInterface "Ethernet"
PS C:\> Install-NetworkControllerCluster -Node $NodeObject -ClusterAuthentication None
Version                         : 10.0.0
Node                            : {Node1}
ClusterAuthentication           : None
ManagementSecurityGroup         :
CredentialEncryptionCertificate :

This command installs a Network Controller cluster in a test deployment. High availability support is not present because a single node is used in the deployment. No authentication is used between the cluster nodes. Additionally, debug logs are stored locally.

Example 2: Install a Network Controller cluster in a domain-joined environment

PS C:\> $NodeObject1 = New-NetworkControllerNodeObject -Name "Node1" -Server "NCNode1.Contoso.com" -FaultDomain "fd:/rack1/host1" -RestInterface "Ethernet"
PS C:\> $NodeObject2 = New-NetworkControllerNodeObject -Name "Node2" -Server "NCNode2.Contoso.com" -FaultDomain "fd:/rack1/host2" -RestInterface "Ethernet"
PS C:\> $NodeObject3 = New-NetworkControllerNodeObject -Name "Node3" -Server "NCNode3.Contoso.com" -FaultDomain "fd:/rack2/host3" -RestInterface "Ethernet"
PS C:\> $Certificate = Get-Item Cert:\LocalMachine\My | Get-ChildItem | where {$_.Subject -imatch "NCEncryption"}
PS C:\> Install-NetworkControllerCluster -Node @($NodeObject1,$NodeObject2,$NodeObject3) -ClusterAuthentication Kerberos -ManagementSecurityGroup Contoso\NCManagementAdmins -LogLocation "\\share\diagnostics" -CredentialEncryptionCertificate $Certificate
CertificateVersion             : 10.0.0
Node                           : {Node1, Node2, Node3}
ClusterAuthentication          : Kerberos
ManagementSecurityGroup        : Contoso\NCManagementAdmins
CredentialEncryptionCertificate: [Subject]
                                   CN=NCEncryption
                                 [Issuer]
                                   CN=Contoso
                                 [Serial Number]
                                   1C00000003786A607D6EFB733F000000000003
                                 [Not Before]
                                   2/11/2015 6:18:21 AM
                                 [Not After]
                                   2/10/2017 6:18:21 AM
                                 [Thumbprint]
                                   D4FDE4F607849083C590466334D66037C0E38001

This command installs a Network Controller cluster in a domain-joined environment. The authentication that is used between the cluster nodes is Kerberos. Debug logs are stored in a central location. To encrypt the credentials used to store Network Controller binaries on disk, the user provides a certificate with subject name as NCEncryption.

Example 3: Install a Network Controller cluster in a non domain-joined environment

PS C:\> $Node1Certificate = Get-Item Cert:\LocalMachine\My | Get-ChildItem | where {$_.Subject -imatch "NCNode1"
PS C:\> $Node2Certificate = Get-Item Cert:\LocalMachine\My | Get-ChildItem | where {$_.Subject -imatch "NCNode2"
PS C:\> $Node3Certificate = Get-Item Cert:\LocalMachine\My | Get-ChildItem | where {$_.Subject -imatch "NCNode3"
PS C:\> $NodeObject1 = New-NetworkControllerNodeObject -Name "Node1" -Server "NCNode1" -FaultDomain "fd:/rack1/host1" -RestInterface "Ethernet" -Certificate $Node1Certificate
PS C:\> $NodeObject2 = New-NetworkControllerNodeObject -Name "Node2" -Server "NCNode2" -FaultDomain "fd:/rack1/host2" -RestInterface "Ethernet" -Certificate $Node2Certificate
PS C:\> $NodeObject3 = New-NetworkControllerNodeObject -Name "Node3" -Server "NCNode3" -FaultDomain "fd:/rack2/host3" -RestInterface "Ethernet" -Certificate $Node3Certificate
PS C:\> $Cert = Get-Item Cert:\LocalMachine\My |  Get-ChildItem | where {$_.Subject -imatch "NCEncryption"}
PS C:\> Install-NetworkControllerCluster -Node @($NodeObject1,$NodeObject2,$NodeObject3) -ClusterAuthentication x509-LogLocation "\\share\diagnostics" -StoreAccessCredential $Cred -CredentialEncryptionCertificate $Cert
Version                        : 10.0.0
Node                           : {Node1, Node2, Node3}
ClusterAuthentication          : x509
ManagementSecurityGroup        :
CredentialEncryptionCertificate: [Subject]
                                   CN=NCEncryption
                                 [Issuer]
                                   CN=Contoso
                                 [Serial Number]
                                   1C00000003786A607D6EFB733F000000000003
                                 [Not Before]
                                   2/11/2015 6:18:21 AM
                                 [Not After]
                                   2/10/2017 6:18:21 AM
                                 [Thumbprint]
                                   D4FDE4F607849083C590466334D66037C0E38001

This command installs a Network Controller cluster in a non-domain-joined environment. The authentication used between the cluster nodes is a X.509 certificate. Debug logs are stored in a central location. To encrypt the credentials used to store Network Controller binaries on disk, you have to provide a certificate with a subject name as NCEncryption.

Parameters

-CertificateThumbprint

Specifies the digital public key X.509 certificate of a user account that has permission to perform this action. Specify the certificate thumbprint of the certificate. Specify this parameter if you run this cmdlet on computer that is not part of the Network Controller cluster.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ClusterAuthentication

Specifies the type of authentication to be used amongst the cluster nodes. The allowed values are Kerberos, x509, and None. If the Network Controller nodes are domain joined, Kerberos authentication should be used. If not, domain joined, x509 authentication should be used. It is not recommended to deploy a cluster with no authentication in production environments.

Type:	ClusterAuthentication
Accepted values:	None, Kerberos, X509
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Credential

Specifies a user credential that has permission to perform this action. The default is the current user. Specify this parameter if you run this cmdlet on a computer that is not part of the Network Controller cluster.

Type:	PSCredential
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CredentialEncryptionCertificate

Specifies the certificate to use to encrypt the credentials that are used to access Network Controller binaries on the disk. It is also used to encrypt the LogLocationCredential if the administrator provides it. This is mandatory if the LogLocationCredential is provided.

Type:	X509Certificate2
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DiagnosticLogLocation

Specifies the location of diagnostic logs.

If you do not specify a value for this parameter, the logs are stored locally on each node. Application logs are stored locally in the %systemdrive%\Windows\tracing\SDNDiagnostics folder. Cluster logs are stored locally in %systemdrive%\ProgramData\Microsoft\Service Fabric\log\Traces folder.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-EnableAutomaticUpdates

Specifies whether to enable automatic updates for the cluster.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Force

Forces the command to run without asking for user confirmation.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-GmsaAccountName

Specifies the name of the Group Managed Service Account (gMSA).

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-LogLocationCredential

Specifies the credentials to access the remote log location. This is required only if the log location restricts access to few accounts.

Type:	PSCredential
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-LogSizeLimitInMBs

Specifies the maximum log size, in MB, to store. Logs are stored in circular fashion. If the DiagnosticLogLocation parameter is provided, the default value of this parameter is 40 GB. If DiagnosticLogLocation is not provided, the logs are stored on the Network Controller nodes and the default value of this parameter is 15 GB.

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-LogTimeLimitInDays

Specifies the duration limit, in days, for which the logs are stored. Logs are stored in circular fashion. The default value of this parameter is 3 days.

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ManagementSecurityGroup

Specifies the security group for users that have permission to execute the Network Controller deployment cmdlets. This parameter is applicable and mandatory only if the cluster authentication is Kerberos.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Node

Specifies a list of Network Controller nodes. You can create the node objects using New-NetworkControllerNodeObject cmdlet.

Type:	NetworkControllerNode[]
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-UseSsl

Indicates that the remote computer uses the Secure Sockets Layer (SSL) protocol to establish a connection to the Network Controller node. The default value of this parameter is $False. Specify this parameter only if you run this cmdlet on a computer that is not part of the Network Controller cluster.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Inputs

None

Outputs

Object

This cmdlet returns an object that contains the following fields:

Cluster version
Name of the Network Controller nodes
Authentication to be used between cluster nodes
Management security group
Credential Encryption Certificate

次の方法で共有

Install-NetworkControllerCluster

Syntax

Description

Examples

Example 1: Install a Network Controller cluster in a test deployment

Example 2: Install a Network Controller cluster in a domain-joined environment

Example 3: Install a Network Controller cluster in a non domain-joined environment

Parameters

-CertificateThumbprint

-ClusterAuthentication

-Confirm

-Credential

-CredentialEncryptionCertificate

-DiagnosticLogLocation

-EnableAutomaticUpdates

-Force

-GmsaAccountName

-LogLocationCredential

-LogSizeLimitInMBs

-LogTimeLimitInDays

-ManagementSecurityGroup

-Node

-UseSsl

-WhatIf

Inputs

Outputs

フィードバック

その他のリソース

次の方法で共有

Install-NetworkControllerCluster

Syntax

Description

Examples

Example 1: Install a Network Controller cluster in a test deployment

Example 2: Install a Network Controller cluster in a domain-joined environment

Example 3: Install a Network Controller cluster in a non domain-joined environment

Parameters

-CertificateThumbprint

-ClusterAuthentication

-Confirm

-Credential

-CredentialEncryptionCertificate

-DiagnosticLogLocation

-EnableAutomaticUpdates

-Force

-GmsaAccountName

-LogLocationCredential

-LogSizeLimitInMBs

-LogTimeLimitInDays

-ManagementSecurityGroup

-Node

-UseSsl

-WhatIf

Inputs

Outputs

Related Links

フィードバック

その他のリソース