Get-IscsiConnection
Gets information about connected iSCSI initiator connections.
Syntax
Get-IscsiConnection
[-ConnectionIdentifier <String[]>]
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-InitiatorSideIdentifier <String[]>]
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-TargetSideIdentifier <String[]>]
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-InitiatorPortalAddress <String[]>]
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-IscsiTarget <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-InitiatorPort <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-IscsiSession <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-iSCSITargetPortal <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-IscsiConnection
[-InitiatorPortalPortNumber <UInt16[]>]
[-InititorIPAdressListNumber <UInt16[]>]
[-Disk <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Description
The Get-IscsiConnection cmdlet returns information about active iSCSI initiator connections.
Examples
Example 1: Display information about a connected iSCI target
PS C:\> Get-IscsiConnection
ConnectionIdentifier : fffffa8005313020-2
InitiatorNodeAddress : 0.0.0.0
InitiatorPortNumber : 41458
TargetNodeAddress : 10.121.235.126
TargetPortNumber : 3260The command displays information returned by this cmdlet from a connected iSCSI target.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConnectionIdentifier
Specifies the connection identifier for an iSCSI session.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Disk
Accepts a MSFT disk object as an input. The MSFT disk object is output from the Get-Disk cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InitiatorPort
Accepts a MSFT initiator port object as an input. The MSFT initiator port object is output from the Get-InitiatorPort cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InitiatorPortalAddress
Specifies the IP address or DNS name that is associated with the portal.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InitiatorPortalPortNumber
Specifies the TCP/IP port number for the initiator portal.
| Type: | UInt16[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InitiatorSideIdentifier
Specifies the initiator side identifier.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InititorIPAdressListNumber
Specifies the index to the initiator IP address list.
| Type: | UInt16[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IscsiSession
Accepts a MSFT iSCSI session object as an input. The MSFT iSCSI session object is output from the Get-IscsiSession cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IscsiTarget
Accepts a MSFT iSCSI target object as an input. The MSFT iSCSI target object is output from the Get-IscsiTarget cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-iSCSITargetPortal
Accepts a MSFT iSCSI target portal CIM object as an input. The MSFT iSCSI target portal CIM object is output from the Get-IscsiTargetPortal cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-TargetSideIdentifier
Specifies the target side identifier.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.