Set-IpamSubnet

Reference

Module:: IpamServer

Modifies an existing IP subnet in IPAM.

Syntax

Set-IpamSubnet
   -NetworkId <String[]>
   [-NetworkType <VirtualizationType[]>]
   [-AddressSpace <String[]>]
   [-NewNetworkId <String>]
   [-NewNetworkType <VirtualizationType>]
   [-NewAddressSpace <String>]
   [-Name <String>]
   [-Owner <String>]
   [-Description <String>]
   [-VlanId <UInt16[]>]
   [-VmmLogicalNetwork <String>]
   [-NetworkSite <String>]
   [-VirtualSubnetId <Int32>]
   [-AddCustomConfiguration <String>]
   [-RemoveCustomConfiguration <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-IpamSubnet
   -InputObject <CimInstance[]>
   [-NewNetworkId <String>]
   [-NewNetworkType <VirtualizationType>]
   [-NewAddressSpace <String>]
   [-Name <String>]
   [-Owner <String>]
   [-Description <String>]
   [-VlanId <UInt16[]>]
   [-VmmLogicalNetwork <String>]
   [-NetworkSite <String>]
   [-VirtualSubnetId <Int32>]
   [-AddCustomConfiguration <String>]
   [-RemoveCustomConfiguration <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-IpamSubnet cmdlet modifies an existing IP subnet in IP Address Management (IPAM).

Examples

Example 1 Add metadata to a subnet

PS C:\> Get-IpamSubnet -AddressFamily IPv4|where {$_.Name -Like "Site*"}|Set-IpamSubnet -AddCustomConfiguration "ADSite=Site01" -PassThru | Format-List Name, NetworkId, CustomConfiguration

Name                : Site01_1

NetworkId           : 20.20.128.0/24

CustomConfiguration : ADSite=Site01; Name                : Site01_2

NetworkId           : 10.20.1.0/24

CustomConfiguration : ADSite=Site01;
Name                : Site01_3

NetworkId           : 10.20.2.0/24

CustomConfiguration : ADSite=Site01;
Name                : Site01_4

NetworkId           : 10.20.4.0/24

CustomConfiguration : ADSite=Site01;
Name                : Site01_5

NetworkId           : 10.20.8.0/24

CustomConfiguration : ADSite=Site01;

This command adds ADSite information as metadata to all subnets allocated to Site01.

The command includes the PassThru parameter, so it displays results to the console.

Example 2: Modify a network ID

PS C:\> Set-IpamSubnet -NetworkId 10.10.1.0/16 -NetworkType NonVirtualized -NewNetworkId 10.10.1.0/17

This command modifies the NonVirtualized network ID of a subnet.

Example 3: Rename a subnet

PS C:\> Set-IpamSubnet -NetworkId 10.10.1.0/17 -Name "Site01_2"

This command renames a subnet to Site01_2.

Example 4: Convert the network type to provider

PS C:\> Set-IpamSubnet -NetworkId 10.10.1.0/17 -NetworkType NonVirtualized -NewNetworkType Provider

This command converts the network type of a subnet from NonVirtualized to Provider. By default, the provider subnet will be assigned to default provider address space.

Example 5: Convert the network type to non-virtualized

PS C:\> Set-IpamSubnet -NetworkId 10.10.1.0/17 -NetworkType Provider -NewNetworkType NonVirtualized

This command converts the network type of a subnet from Provider to NonVirtualized.

Example 6: Convert the network type and assign to a provider address space

PS C:\> Set-IpamSubnet -NetworkId 10.10.1.0/17 -NetworkType NonVirtualized -NewNetworkType Provider -NewAddressSpace ContosoDataCenter

This command modifies the network type of a subnet from NonVirtualized to Provider, and assigns this subnet to the provider address space ContosoDataCenter.

Parameters

-AddCustomConfiguration

Specifies semi-colon (;) separated name/value pairs. This parameter specifies custom metadata that are associated with the address space.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-AddressSpace

Specifies an array of address spaces to which this IP address range belongs. If you do not specify a value, the cmdlet modifies matching ranges from all address spaces.

Type:	String[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.

For more information about Windows PowerShell background jobs, see about_Jobs.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:	CimSession[]
Aliases:	Session
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Description

Specifies a description for the subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-InputObject

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Type:	CimInstance[]
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-Name

Specifies the name for the subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-NetworkId

Specifies the network and the prefix for the given subnet. Specify the network ID in Classless Interdomain Routing (CIDR) notation in the format Network/Prefix.

Type:	String[]
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-NetworkSite

Specifies a network site. A network site is associated with a logical network and forms an abstraction of the physical network. A logical network can contain many network sites. This property is inherited by all ranges and addresses associated with the given subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-NetworkType

Specifies an array of network types for the subnets to modify.

The acceptable values for this parameter are:

Provider -- Customer -- NonVirtualized

If you do not specify a value, all matching IP subnets of network type Provider, Customer, and NonVirtualized will be modified.

Type:	VirtualizationType[]
Accepted values:	NonVirtualized, Provider, Customer
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-NewAddressSpace

Specifies the name of a new address space for the IP subnet. A subnet of network type NonVirtualized can only belong to the Default address space. A subnet of network type Provider can belong to either the Default address space or a Provider address space. A subnet of network type Customer can only belong to a Customer address space.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-NewNetworkId

Specifies the name of a new value of network ID for this subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-NewNetworkType

Specifies the name of a new value of network type for this address. You can change the network type from NonVirtualized to Provider, or from Provider to NonVirtualized. However, you cannot convert network type from NonVirtualized or Provider to Customer.

Type:	VirtualizationType
Accepted values:	NonVirtualized, Provider
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-Owner

Specifies an owner for the subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveCustomConfiguration

Specifies a list of custom metadata fields to modify. The list is a string of name-value pairs, separated by semicolons (;).

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-VirtualSubnetId

Specifies a virtual subnet ID.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-VlanId

Specifies an array of unique identifiers for virtual local area networks (VLAN).

Type:	UInt16[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-VmmLogicalNetwork

Specifies the abstraction of a physical network that describes a particular function in your environment such as backend or frontend.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Outputs

IpamSubnet

This cmdlet returns an object that represents a subnet in IPAM Server.

Notes

When converting the network type of a subnet from Provider to NonVirtualized, the address space of the subnet is reset to Default.

次の方法で共有

Set-IpamSubnet

Syntax

Description

Examples

Example 1 Add metadata to a subnet

Example 2: Modify a network ID

Example 3: Rename a subnet

Example 4: Convert the network type to provider

Example 5: Convert the network type to non-virtualized

Example 6: Convert the network type and assign to a provider address space

Parameters

-AddCustomConfiguration

-AddressSpace

-AsJob

-CimSession

-Confirm

-Description

-InputObject

-Name

-NetworkId

-NetworkSite

-NetworkType

-NewAddressSpace

-NewNetworkId

-NewNetworkType

-Owner

-PassThru

-RemoveCustomConfiguration

-ThrottleLimit

-VirtualSubnetId

-VlanId

-VmmLogicalNetwork

-WhatIf

Outputs

Notes

フィードバック

その他のリソース

次の方法で共有

Set-IpamSubnet

Syntax

Description

Examples

Example 1 Add metadata to a subnet

Example 2: Modify a network ID

Example 3: Rename a subnet

Example 4: Convert the network type to provider

Example 5: Convert the network type to non-virtualized

Example 6: Convert the network type and assign to a provider address space

Parameters

-AddCustomConfiguration

-AddressSpace

-AsJob

-CimSession

-Confirm

-Description

-InputObject

-Name

-NetworkId

-NetworkSite

-NetworkType

-NewAddressSpace

-NewNetworkId

-NewNetworkType

-Owner

-PassThru

-RemoveCustomConfiguration

-ThrottleLimit

-VirtualSubnetId

-VlanId

-VmmLogicalNetwork

-WhatIf

Outputs

Notes

Related Links

フィードバック

その他のリソース