Get-DnsServerResourceRecord
Gets resource records from a specified DNS zone.
Syntax
Get-DnsServerResourceRecord
[[-Name] <String>]
[-ComputerName <String>]
[[-RRType] <String>]
[-ZoneName] <String>
[-Node]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Description
The Get-DnsServerResourceRecord cmdlet gets the following information for a specified resource record from a Domain Name System (DNS) zone:
HostName
RecordType
RecordClass
TimeToLive
Timestamp
RecordData
Examples
Example 1: Get all resource records in a specified zone
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com"This command gets all DNS server resource records in a zone named contoso.com.
Example 2: Get all resource records in a zone for a specified node
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com" -Name "Admin01"This command gets all DNS server resource records in a zone named contoso.com from the node named Admin01.
Example 3: Get all resource records in a zone by specified host name
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com" -Name "Host02"This command gets all DNS server resource records in a zone named contoso.com that have the name Host02. The command is similar to the one in example 2, but in this case the command uses a host name instead of a node name.
Example 4: Get all A records in a zone by specified host and specified type
PS C:\>Get-DnsServerResourceRecord -ZoneName "contoso.com" -Name "Host03" -RRType "A"This command gets all A records in a zone named contoso.com that have the name Host03.
Example 5: Get all A records in a specified zone
PS C:\>Get-DnsServerResourceRecord -ZoneName "contoso.com" -RRType "A"This command gets all A records in a zone named contoso.com.
Example 6: Get all NS records at the root of a specified zone
PS C:\>Get-DnsServerResourceRecord -ZoneName "contoso.com" -RRType "NS" -NodeThis command gets all NS records at the root of a zone named contoso.com.
Parameters
-AsJob
ps_cimcommon_asjob
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
| Type: | String |
| Aliases: | Cn, ForwardLookupPrimaryServer |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
Specifies a node name within the selected zone. If not specified, it defaults to the root (@) node.
| Type: | String |
| Position: | 2 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Node
Specifies that the command returns only the resource records at the root of the node specified by the Name parameter. If -Node is not specified then both the root and any child records in the node are returned.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RRType
Specifies the type of resource record.
The acceptable values for this parameter are:
HInfo
Afsdb
Atma
Isdn
Key
Mb
Md
Mf
Mg
MInfo
Mr
Mx
NsNxt
Rp
Rt
Wks
X25
A
AAAA
CName
Ptr
Srv
Txt
Wins
WinsR
Ns
Soa
NasP
NasPtr
DName
Gpos
Loc
DhcId
Naptr
RRSig
DnsKey
DS
NSec
NSec3
NSec3Param
| Type: | String |
| Accepted values: | HInfo, Afsdb, Atma, Isdn, Key, Mb, Md, Mf, Mg, MInfo, Mr, Mx, NsNxt, Rp, Rt, Wks, X25, A, AAAA, CName, Ptr, Srv, Txt, Wins, WinsR, Ns, Soa, NasP, NasPtr, DName, Gpos, Loc, DhcId, Naptr, RRSig, DnsKey, DS, NSec, NSec3, NSec3Param |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ZoneName
Specifies the name of a DNS server zone.
| Type: | String |
| Aliases: | ForwardLookupZone |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |