2.2.14.1.2 Bandwidth Measure Start (RDP_BW_START)
The RDP_BW_START structure is used to start a bandwidth measurement operation.
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
3 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
headerLength |
headerTypeId |
sequenceNumber |
|||||||||||||||||||||||||||||
|
requestType |
|||||||||||||||||||||||||||||||
headerLength (1 byte): An 8-bit unsigned integer that specifies the size, in bytes, of the header data. This field MUST be set to 0x06.
headerTypeId (1 byte): An 8-bit unsigned integer that specifies the high-level type. This field MUST be set to TYPE_ID_AUTODETECT_REQUEST (0x00).
sequenceNumber (2 bytes): A 16-bit unsigned integer that specifies the message sequence number.
requestType (2 bytes): A 16-bit unsigned integer that specifies a request type code. This field MUST be set to one of the following values.
-
Value
Meaning
0x0014
One of two possible meanings:
The Bandwidth Measure Start message is encapsulated in the SubHeaderData field of an RDP_TUNNEL_SUBHEADER ([MS-RDPEMT] section 2.2.1.1.1) structure that is being tunneled over a reliable UDP multitransport connection ([MS-RDPEMT] sections 1.3 and 2.1).
The Bandwidth Measure Start message is encapsulated in the autoDetectReqPduData field of an Auto-Detect Request PDU (section 2.2.14.3) sent after the RDP Connection Sequence (section 1.3.1.1) has completed.
0x0114
The Bandwidth Measure Start message is encapsulated in the SubHeaderData field of an RDP_TUNNEL_SUBHEADER ([MS-RDPEMT] section 2.2.1.1.1) structure that is being tunneled over a lossy UDP multitransport connection ([MS-RDPEMT] sections 1.3 and 2.1).
0x1014
The Bandwidth Measure Start message is encapsulated in the autoDetectReqPduData field of an Auto-Detect Request PDU sent during the Optional Connect-Time Auto-Detection phase of the RDP Connection Sequence.