Standard Audit File for Tax (SAF-T) for Norway

This article includes country/region-specific information about how to set up the Standard Audit File for Tax (SAF-T) for legal entities that have their primary address in Norway.

Note

As of version 175.137 of SAF-T Format (NO) and 175.92 of SAF-T Financial data model mapping, the version 1.30 of SAF-T Financial is supported. SAF-T Financial of version 1.30 is required on January 1 2025, but can be used for earlier periods if preferred. The old form, version 1.20, can be used for previous years (financial year 2024 and earlier).

Note

Use of the One voucher functionality introduces a limitation on further SAF-T reporting for some scenarios that are subject to SAF-T. Specifically, a bank statement scenario must be posted by using different vouchers for transactions that have different counteragent accounts. For more information about how to use the One voucher functionality and SAF-T, see the SAF-T report and One voucher section later in this article.

Setup

To use the Norwegian SAF-T Financial data report in Dynamics 365 Finance, complete the following setup tasks:

1. Import Electronic reporting (ER) configurations.
2. Set up the organization registration number.
3. Set up the tax registration numbers of the company.
4. Set up the ER format on the General ledger parameters page.
5. Associate sales tax codes used in Finance with Norwegian standard value-added tax (VAT) codes.
6. Associate main accounts used in Finance with Norwegian standard accounts or an Income statement (Næringslivskoder).
7. Enable features in Feature management.

Import ER configurations

In Finance, import the following ER configurations from the Global repository.

ER configuration name	Configuration type
Standard Audit File (SAF-T)	Model
SAF-T Financial data model mapping	Model mapping
SAF-T Format (NO)	Format (exporting)

For more information about how to import ER configurations, see Import Electronic reporting (ER) configurations from Dataverse.

Import the most recent versions of the configurations. The version description usually includes the number of the Microsoft Knowledge Base (KB) article that explains the changes that were introduced in the configuration version.

Note

After you import all the ER configurations from the preceding table, set the Default for model mapping option to Yes for the SAF-T Financial data model mapping configuration.

Set up the organization registration number

Organization registration number of the legal entity is reported in SAF-T file in the Header > Company > RegistrationNumber field. To configure the organization registration number that should be reported in the RegistrationNumber field, follow these steps.

1. Go to Organization administration > Organizations > Legal entities, and select your legal entity.
2. On the Bank account information FastTab, assign the organization number to the Routing code field.

Set up the company tax registration numbers

As of version 175.119 of the SAF-T Format (NO) ER format, the TaxRegistration node under Header > Company of the report represents company VAT registration numbers that are in effect during the reporting period of the report, from among the registration IDs that are defined in the properties of the legal entity. The TaxVerificationDate field of the TaxRegistration node represents the expiration date of the registration ID where the number expiration date is within the reporting period. To configure the registration ID that should be reported in the TaxRegistration node, follow these steps.

1. Go to Organization administration > Organizations > Legal entities.
2. Select the legal entity, and then select Registration IDs.
3. Select or create the address in Norway, and then, on the Registration ID FastTab, select Add.
4. In the Registration type field, select the registration type that's dedicated to Norway, and that uses the VAT ID registration category.
5. In the Registration number field, enter the tax number.
6. On the General tab, in the Effective field, enter the date when the number becomes effective.

For more information about how to set up registration categories and registration types, see Registration IDs.

If the VAT registration number isn't specified among the registration IDs of the legal entity, the system retrieves the value from Tax registration number field on the Tax registration FastTab of the legal entity properties page.

Set up the ER format

1. In Finance, go to General ledger > Ledger setup > General ledger parameters.
2. On the General ledger parameters page, on the Standard Audit File for Tax (SAF-T) tab, in the Standard Audit File for Tax (SAF-T) field, select SAF-T Format (NO).

Note

If you enable the Standard Audit File for Tax (SAF-T) electronic report feature in the Feature management workspace, the Standard Audit File for Tax (SAF-T) tab of the General ledger parameters page will include the Use common menu item checkbox in addition to the Standard Audit File for Tax (SAF-T) field.

To run the SAF-T Format (NO) ER configuration, you must clear the Use common menu item checkbox. Select the Use common menu item checkbox only if you plan to use an ER configuration that can be run directly from the Electronic reporting workspace and doesn't require any data preprocessing on the Finance app side.

Associate sales tax codes used in Finance with Norwegian standard VAT codes

As the documentation explains, in Norwegian SAF-T Financial data, sales tax codes that are used in Finance must be associated with Norwegian standard VAT tax codes (StandardTaxCode) for the purpose of SAF-T reporting. The Norwegian standard VAT tax codes are available at https://github.com/Skatteetaten/saf-t.

As of version 175.119 of the SAF-T Format (NO) ER format, you can use one of the following two options to associate sales tax codes that are used in Finance with Norwegian standard VAT codes. Base your choice on your company's setup and preferences.

1. Use the application-specific parameters of the ER format.
2. Use the External codes functionality.

If you use option 1, the report doesn't consider option 2. If any of the sales tax codes that are used in Finance aren't associated with a value by using either the application-specific parameters of the ER format or the External codes functionality, you receive a warning message when you generate the report. This message includes information about the missing mapping.

Option 1: Associate sales tax codes used in Finance with Norwegian standard VAT codes by using the application-specific parameters of the ER format

1. In the Electronic reporting workspace, select the Reporting configurations tile.
2. On the Configurations page, expand Standard Audit File (SAF-T), and then select SAF-T Format (NO).
3. On the Action Pane, on the Configurations tab, in the Application specific parameters group, select Setup.
4. On the Application specific parameters page, select the latest version of the format that you want to define conditions for.
5. On the Lookups FastTab, select the StandardTaxCodes_Lookup lookup, and define the appropriate conditions.
6. On the Conditions FastTab, define which tax codes must correspond to a specific lookup result.
7. When you've finished setting up conditions, in the State field, select Completed. Then save the configuration.

Option 2: Associate sales tax codes used in Finance with Norwegian standard VAT codes by using the External codes functionality

1. Go to Tax > Indirect taxes > Sales tax > Sales tax codes.

2. On the Sales tax code page, select the Sales tax code record, and then, on the Action Pane, on the Sales tax code tab, in the Sales tax code group, select External codes.

   

3. On the External codes page, specify the Norwegian standard VAT tax codes that should be used for the selected sales tax code record for the purpose of SAF-T reporting.

4. In the Overview section, in the Code field, select the identifier of the external code definition. Then, in the Value section, in the Value field, and enter a standard tax code that corresponds to the selected sales tax code.

   

Associate main accounts used in Finance with Norwegian standard accounts or an Income statement (Næringslivskoder)

In Norwegian SAF-T Financial data, main accounts that are used in Finance must be associated with Norwegian standard accounts or an Income statement (Næringslivskoder) for the purpose of SAF-T reporting. The Norwegian standard accounts are available at https://github.com/Skatteetaten/saf-t.

As of version 175.119 of the SAF-T Format (NO) ER format, you can use of the following two options to associate main accounts that are used in Finance with Norwegian standard accounts or an Income statement. Base your choice on your company's setup and preferences.

1. Use additional consolidation accounts. Use this option to associate main accounts that are used in Finance with an Income statement (grouping category and grouping code).
2. Use the application-specific parameters of the ER format. This option supports only Norwegian standard accounts and is available before January 1, 2025 only.

If option 1 is used, the report doesn't consider option 2. If any of the main accounts that are used in Finance aren't associated with a value by using either the application-specific parameters of the ER format or additional consolidation accounts, you receive a warning message when you generate the report. This message includes information about the missing mapping.

Note

SAF-T Financial of version 1.30 supports only Grouping category and Grouping code fields, Standard accounts are no longer supported. Due to this change, as of version 175.137 of SAF-T Format (NO) introduces a validation with warning before January 1, 2025 and blocking exception starting January 1, 2025, if option 2 is used. Starting with version 175.137 of SAF-T Format (NO), option 2 will no longer be supported, Use grouping category parameter is mandatory, when you run the SAF-T report.

Option 1: Associate main accounts used in Finance with Norwegian standard accounts or an Income statement by using additional consolidation accounts

1. Create a consolidation account group. You can chose any name for consolidation account group, this name isn't used in the XML report. Consolidation account group is used as a link to the set of Additional consolidation accounts where Norwegian standard accounts or an Income statement (Næringslivskoder) for the purpose of SAF-T reporting are defined.
2. Add accounts to the consolidation account group. In the Consolidation account field, specify a standard account. If the Use grouping category option of the report is turned off, this value is reported in the StandardAccountID element of SAF-T under the Master data > GeneralLedgerAccounts > Account node (available before January 1, 2025 only). If the Use grouping category option of the report is turned on, this value is reported in the GroupingCode field of the report. In the Consolidation account name field, you can optionally specify the standard account name or description. This value isn't used in SAF-T.

For more information about additional consolidation accounts, see Consolidation account groups and additional consolidation accounts.

Option 2: Associate main accounts used in Finance with Norwegian standard accounts by using the application-specific parameters of the ER format

Note

This option isn't supported after January 1, 2025, due to changes introduced in SAF-T Financial of version 1.30. It's recommended to use the following or a higher version of the ER configurations:

• SAF-T Format (NO) 175.137
• SAF-T Financial data model mapping 175.92

To associate the main accounts that are used in Finance with Norwegian standard accounts by using the application-specific parameters, follow these steps.

1. In the Electronic reporting workspace, in the configuration tree, select the SAF-T Format (NO) ER format.

2. Make sure that the company you are working in is the company for which you want to set up the Application specific parameters.

3. On the Action Pane, on the Configurations tab, in the Application specific parameters group, select Setup.

4. Select the version of the format that you want to use on the left side of the Application specific parameters page.

5. On the Lookup FastTab, select StandardMainAccount_Lookup, and then specify criteria on the Conditions FastTab by adding lines for each Result value which must be used in the selected company. If several Main accounts in the selected company must result the same Standard account, add a separate line for each Main account and specify the same Standard account for each one.

6. Select the value, NA as the last condition in the list. It must be set to *Not blank* in the Main account column. Verify the value in the Line column that NA is the last condition in the table.

7. When you've finished setting up conditions, change the value of the State field to Completed, save your changes, and close the page.

   

You can easily export the setup of application-specific parameters from one version of a report and import it into another by selecting Export or Import on the Action Pane. You can also export the setup from one report and import it into the same report in another company if the Main accounts are the same in both companies.

Enable features in Feature management

1. Go to Feature management > All.

2. In the feature list, find and select the following features:

   • Optimization of query data source creation time during execution of ER reports
   • Optimize datasets memory consumption at ER reports runtime
   • Dimension attributes values collection optimization in 'MasterFiles' report section of SAF-T for Norway

3. Select Enable now.

Generate the Norwegian SAF-T Financial data report

To generate the Norwegian SAF-T Financial data report, follow these steps.

1. In Finance, go to General ledger > Inquiries and reports > Standard Audit File for Tax (SAF-T) > Standard Audit File for Tax (SAF-T).

2. In the dialog box for the report, in the From date and To date fields, specify the start and end dates of the period that you want to generate the report for.

3. Select the checkboxes for Customers, Vendors, and Financial dimensions to include all the records from the related tables on the report.

   If the Customers and Vendors checkboxes are cleared, the report will include only those customers and vendors of your company that there were transactions for in the reporting period, and customers and vendors that have a non-zero balance.

   If the Financial dimensions checkbox is cleared, only those financial dimensions that were used in transactions during the reporting period will be reported in the <MasterFiles> node of the report.

4. In the Personnel number field, select an employee to add the employee to the <AuditFileSender> node of the report. This node reports information about the contact person for the audit file (First name and Last name).

5. Select the Report tax information in sales tax currency checkbox if you want to report tax information in tax code currency.

   If the Report tax information in sales tax currency checkbox is selected, the <TaxInformation> element reports the following amounts in the tax code currency:

   • GeneralLedgerEntries/Journal/Transaction/Line/TaxInformation/TaxBase
   • GeneralLedgerEntries/Journal/Transaction/Line/TaxInformation/TaxAmount/Amount

   If the Report tax information in sales tax currency checkbox is not selected, the amounts in the <TaxInformation> element and all of the amounts in the reports are reported in the accounting currency.

   The following amount is always reported in the document currency:

   • GeneralLedgerEntries/Journal/Transaction/Line/TaxInformation/TaxAmount/CurrencyAmount

   Where GeneralLedgerEntries/Journal/Transaction/Line/TaxInformation/TaxAmount/Currency represents the document currency.

6. Select Include zero lines to include documents that have a zero amount on the report. This option is available as of Finance version 10.0.37. In the Consolidation account group field, select the name of the consolidation account group that you created and set up for Norwegian standard accounts or an Income statement.

7. Select the Use grouping category checkbox to force GroupingCategory and GroupingCode nodes to be generated instead of the StandardAccountID element in the GeneralLedgerAccounts node. This checkbox is available as of Finance version 10.0.37. The value of GroupingCategory is copied from the name of the consolidation account group. Use grouping category parameter is mandatory as of January 1, 2025, due to changes introduced in SAF-T Financial of version 1.30. It is recommended to use following or higher version of ER configurations:

• SAF-T Format (NO) 175.137
• SAF-T Financial data model mapping 175.92

You can also apply filters for the Main accounts and General journal entry fields by using Records to include FastTab in the dialog box for the report.

Report naming and splitting

The documentation for Norwegian SAF-T Financial data requires the following naming structure for the XML reports that are generated:

<SAF-T export type>_<organization number of the vendor that the data represents>_<date and time(yyyymmddhh24hmise>_<file number of total files>.xml

Here is an example:

SAF-T Financial_999999999_20160401235911_1_12.xml

Here is an explanation of the parts of this file name:

• SAF-T Financial states the SAF-T type of file.

• 999999999 represents the organization number that belongs to the owner of the data.

  If the organization number is missing, or the output XML file doesn't contain <RegistrationNumber>NA</RegistrationNumber>, go to Organization administration > Organizations > Legal entities, and select your legal entity. Then, on the Bank account information FastTab, assign the organization number to the Routing code field.

• 20160401235911 represents the date and time when the file was created. (A 24-hour clock is used for the time.)

• 1_12 represents file 1 out of 12 total files in the export (that is, in the same selection).

The volume of a single XML file must be less than 2 gigabytes (GB). Every individual XML file that is submitted must be validated against the schema. All <MasterFiles> nodes must be in the first file, and the associated transactions must be in the subsequent files (the number of these files is flexible).

The following table shows a sample selection of one accounting year that has 12 periods. For each period, there is one file that contains transactions.

File number	Contents of the audit file
1	<Header> and <MasterFiles> nodes
2–13	<Header> and <GeneralLedgerEntries> nodes

There can be a maximum of 10 XML files in the same zip archive.

In accordance with these requirements, the SAF-T Format (NO) ER format is implemented to automatically split the resulting report in XML format, based on the following assumptions:

• The maximum volume of the resulting XML report is 2,000,000 kilobytes (KB) (that is, 2 GB).

• All the XML files use the following naming structure:

  <SAF-T export type>_<organization number of the vendor that the data represents>_<date and time(yyyymmddhh24hmise>

• All the XML files are included in one zip archive.

• Each individual XML file is validated against the schema.

After the report is generated, if more than one XML file is generated, the user must manually number the generated files in the zip archive by adding _<file number of total files> to the file names. The user must also make sure that there are no more than 10 XML files in the same zip archive. If there are more than 10 XML files in an archive, the user must manually split it into several archives, each of which has a maximum of 10 XML files.

Implementation details

<AnalysisType> and <AnalysisTypeDescription> nodes

The SAF-T report for Norway must include information about the AnalysisTypeTable under the MasterFiles node of the report. AnalysisTypeTable must represent a table with the analysis code identifiers that are used for further specification of transaction data. In Finance, Financial dimensions is the data source for the AnalysisTypeTable node. When you set up Financial dimensions in your legal entity, use the ReportColumnName field of the Financial dimension data source for the value that will be reported in the <AnalysisType> node. Use the Dimension name field of the Financial dimension data source for the value that will be reported in the <AnalysisTypeDescription> node.

As of version 175.119 of the SAF-T Format (NO) ER format, the Journal type enumerated list of values is included as an additional data source for the AnalysisTypeTable node under the MasterFiles node of the report. The AnalysisTypeTable node includes all the values of the LedgerPostingType enumeration in Finance that are represented by the Bilagsart value in the AnalysisTypeDescription field. Each general journal account entry that's reported in the GeneralLedgerEntries > Journal > Transaction > Line node of SAF-T is reported. The reported information includes information from the LedgerPostingType value of the GeneralJournalAccountEntry table that's represented in the Analysis node.

SAF-T report and One voucher

Using the One voucher functionality introduces a limitation of further SAF-T reporting for data if one voucher was applied. We recommend that you set the Allow multiple transactions within one voucher parameter on the General ledger parameters page to No in your legal entity if you post transactions that are part of the SAF-T report. For information about One voucher functionality, see One voucher.