高速構成を使用して Azure SQL データベースの脆弱性評価を有効にする
この PowerShell スクリプトを使用すると、Azure SQL Server で脆弱性評価の高速構成が有効になります。
クラシック構成を使用して脆弱性評価が既に構成されている場合、このスクリプトはそれを高速構成に移行し、既存のすべてのベースライン定義をコピーします。 スキャン履歴は新しい構成にコピーされません。 スキャン履歴には、クラシック構成で以前に使用されていたストレージ アカウントで引き続きアクセスできます。
前提条件
このサンプルには、Azure PowerShell Az 1.0 以降が必要です。 Get-Module -ListAvailable Az を実行して、インストールされているバージョンを確認します。
インストールする必要がある場合は、Azure PowerShell モジュールのインストールに関するページを参照してください。
Connect-AzAccount を実行して Azure にサインインします。
Azure サブスクリプションをお持ちでない場合は、開始する前に Azure 無料アカウントを作成してください。
ユーザーには、ストレージ アカウントに対する
Storage Blob Data Readerロールが必要です。コマンドを実行するマシンへのアクセスを許可するようにストレージのネットワーク設定を構成する必要があります。
スクリプトによって使用される作業ディレクトリにフォルダーを作成するアクセス許可が必要です。
サンプル スクリプト - MigratingToExpressConfiguration.ps1
注意
Azure を操作するには、Azure Az PowerShell モジュールを使用することをお勧めします。 作業を始めるには、「Azure PowerShell をインストールする」を参照してください。 Az PowerShell モジュールに移行する方法については、「AzureRM から Az への Azure PowerShell の移行」を参照してください。
#Requires -Modules @{ ModuleName="Az.Sql"; ModuleVersion="3.11.0" }
#Requires -Modules @{ ModuleName="Az.Storage"; ModuleVersion="4.8.0" }
#Requires -Modules @{ ModuleName="Az.Accounts"; ModuleVersion="2.9.1" }
#Requires -Version 5.1
<#
.SYNOPSIS
This script configured an Azure SQL Server to the express configuration Vulnerability Assessment feature, scans all databases that belong to the selected server and set baselines (if defined in classic configuration) from the storage that is configures in the policy.
.DESCRIPTION
This script migrates Azure SQL Server to express configuration Vulnerability Assessment feature by executing the following steps:
- It deletes the current Vulnerability Assessment settings (if exists).
This step will reset all the Vulnerability Assessment scans and baselines for all databases.
- It copies the current baselines (if exist) from the customer's storage.
In order to revert this script follow the instructions as mentioned here: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration.
.PARAMETER ServerSubscriptionId
The Subscription id that the server belongs to
.PARAMETER ServerResourceGroupName
The Resource Group that the server belongs to
.PARAMETER ServerName
The SQL server name that we want to apply the new SQL Vulnerability Assessment policy to.
.PARAMETER Force
Will remove the old Vulnerability Assessment setting without asking for confirmation.
.EXAMPLE
.\MigratingToExpressConfiguration.ps1 -SubscriptionId "25b642fc-05c3-11ed-b939-0242ac120002" -ResourceGroupName "ResourceGroup01" -ServerName "Server01" -Force
.\MigratingToExpressConfiguration.ps1 -SubscriptionId "25b642fc-05c3-11ed-b939-0242ac120002" -ResourceGroupName "ResourceGroup01" -ServerName "Server01"
#>
param
(
[Parameter(Mandatory = $True)]
[string]$SubscriptionId,
[Parameter(Mandatory = $True)]
[string]$ResourceGroupName,
[Parameter(Mandatory = $True)]
[string]$ServerName,
[Parameter(Mandatory = $False)]
[switch]$Force
)
###### New SQL Vulnerability Assessment Commands ######
#######################################################
function ClearSqlVulnerabilityAssessmentMasterSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/master/VulnerabilityAssessments/default?api-version=2021-11-01"
return SendRestRequest -Method "Delete" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentMasterSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/master/VulnerabilityAssessments/default?api-version=2021-11-01"
return SendRestRequest -Method "Get" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentServerSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default?api-version=2022-02-01-preview"
return SendRestRequest -Method "Get" -Uri $Uri
}
function SetSqlVulnerabilityAssessmentServerSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default?api-version=2022-02-01-preview"
$Body = @{
properties = @{
state = "Enabled"
}
}
$Body = $Body | ConvertTo-Json
return SendRestRequest -Method "Put" -Uri $Uri -Body $Body
}
function SetSqlVulnerabilityAssessmentBaselineOnUserDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName, $Baseline) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/$DatabaseName/sqlVulnerabilityAssessments/default/baselines/default?api-version=2022-02-01-preview"
$convertedBaseline = $Baseline | ConvertFrom-Json
$properties = @{
properties = @{
latestScan = $false
results = @{}
}
}
if ($convertedBaseline.RuleBaselines.Count -eq 0) {
# baseline is null/empty. No need to send the API call.
return
}
foreach ($rule in $convertedBaseline.RuleBaselines) {
$ruleId = $rule.RuleId
$expectedResults = $rule.Properties.ExpectedResults
if ($ruleId -in $VABinaryRules) {
if ($expectedResults[0][0] -eq "1") {
$expectedResults[0][0] = "True"
}
else {
$expectedResults[0][0] = "False"
}
}
$properties.properties.results[$ruleId] = $expectedResults
}
$Body = $properties | ConvertTo-Json -Depth 5
return SendRestRequest -Method "Put" -Uri $Uri -Body $Body
}
function SetSqlVulnerabilityAssessmentBaselineOnSystemDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName, $Baseline) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default/baselines/default?api-version=2022-02-01-preview&systemDatabaseName=master"
$convertedBaseline = $Baseline | ConvertFrom-Json
$properties = @{
properties = @{
latestScan = $false
results = @{}
}
}
if ($convertedBaseline.RuleBaselines.Count -eq 0) {
# baseline is null/empty. No need to send the API call.
return
}
foreach ($rule in $convertedBaseline.RuleBaselines) {
$ruleId = $rule.RuleId
$expectedResults = $rule.Properties.ExpectedResults
if ($ruleId -in $VABinaryRules) {
if ($expectedResults[0][0] -eq "1") {
$expectedResults[0][0] = "True"
}
else {
$expectedResults[0][0] = "False"
}
}
$properties.properties.results[$ruleId] = $expectedResults
}
$Body = $properties | ConvertTo-Json -Depth 5
return SendRestRequest -Method "Put" -Uri $Uri -Body $Body
}
function RunSqlVulnerabilityAssessmentScanOnUserDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/$DatabaseName/sqlVulnerabilityAssessments/default/initiateScan?api-version=2022-02-01-preview"
SendRestRequest -Method "Post" -Uri $Uri
}
function RunSqlVulnerabilityAssessmentScanOnSystemDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default/initiateScan?api-version=2022-02-01-preview&systemDatabaseName=$DatabaseName"
SendRestRequest -Method "Post" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentScanOnUserDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/$DatabaseName/sqlVulnerabilityAssessments/default/scans/latest?api-version=2022-02-01-preview"
return SendRestRequest -Method "Get" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentScanOnSystemDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default/scans/latest?api-version=2022-02-01-preview&systemDatabaseName=$DatabaseName"
return SendRestRequest -Method "Get" -Uri $Uri
}
function SendRestRequest(
[Parameter(Mandatory = $True)]
[string] $Method,
[Parameter(Mandatory = $True)]
[string] $Uri,
[parameter( Mandatory = $false )]
[string] $Body = "DEFAULT") {
$Params = @{
Method = $Method
Path = $Uri
}
if (!($Body -eq "DEFAULT")) {
$Params = @{
Method = $Method
Path = $Uri
Payload = $Body
}
}
Invoke-AzRestMethod @Params
}
#######################################################
function LogMessage {
[CmdletBinding()]
Param
(
[Parameter(Mandatory=$true, Position=0)]
[string]$LogMessage
)
Write-Host ("{0} - {1}" -f (Get-Date), $LogMessage)
}
function LogError {
[CmdletBinding()]
Param
(
[Parameter(Mandatory=$true, Position=0)]
[string]$LogMessage
)
Write-Error ("{0} - {1}" -f (Get-Date), $LogMessage)
}
#######################################################
function Retry() {
param(
[Parameter(Mandatory = $true)][Action]$action,
[Parameter(Mandatory = $false)][int]$maxAttempts = 3
)
$attempts = 1
do {
try {
$result = $action.Invoke();
return $result
}
catch [Exception] {
LogMessage -LogMessage $_.Exception.Message
}
# exponential backoff delay
$attempts++
if ($attempts -le $maxAttempts) {
$retryDelaySeconds = [math]::Pow(2, $attempts)
$retryDelaySeconds = $retryDelaySeconds - 1 # Exponential Backoff Max == (2^n)-1
LogMessage -LogMessage ("Action failed. Waiting " + $retryDelaySeconds + " seconds before attempt " + $attempts + " of " + $maxAttempts + ".")
Start-Sleep $retryDelaySeconds
}
else {
LogError $_.Exception.Message
$ex = New-Object System.Exception($_.Exception.Message)
throw $ex
}
} while ($attempts -le $maxAttempts)
}
function HaveVulnerabilityAssessmentSetting($ResourceGroupName, $ServerName, $Databases) {
# Check if we have a server setting.
LogMessage -LogMessage "Check Vulnerability Assessment setting for '$($ServerName)' server"
$vaServerSetting = Get-AzSqlServerVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if (![string]::IsNullOrEmpty($vaServerSetting.StorageAccountName)) {
return $true
}
# Check if we have a database setting for server
foreach ($database in $Databases) {
LogMessage -LogMessage "Check VA settings for '$($database.DatabaseName)' database"
$vaDatabaseSetting = Get-AzSqlDatabaseVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
if (![string]::IsNullOrEmpty($vaDatabaseSetting.StorageAccountName)) {
return $true
}
}
# Check if we have a master setting for server
$vaSettingMaster = GetSqlVulnerabilityAssessmentMasterSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$object = ConvertFrom-Json $vaSettingMaster.Content
if (![string]::IsNullOrEmpty($object.properties.storageContainerPath)) {
return $true
}
return $false
}
function HaveExpressConfigurationVulnerabilityAssessmentSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
# Check if we have a server setting.
LogMessage -LogMessage "Check express configuration Vulnerability Assessment setting for '$($ServerName)' server"
$Response = GetSqlVulnerabilityAssessmentServerSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if ($Response.Content.Contains("Enabled")) {
return $true
}
return $false
}
function GetBlobsFromStorage($ContainerName, $Context) {
# Use Get-AzStorageBlob to retrieve a list of blobs from the container
$blobs = Get-AzStorageBlob -Container $ContainerName -Context $Context
if ([string]::IsNullOrEmpty($blobs)) {
return
}
return $blobs
}
function ExtractBaselineBlobName($ServerName, $DatabaseName) {
$prefix = "scans/$ServerName/$DatabaseName/baseline"
# Filter the list to include only blobs with names starting with "baseline"
$baselineBlobs = $blobs | Where-Object { $_.Name.StartsWith($prefix) }
if ($baselineBlobs.Count -eq 0) {
return
}
else {
# Sort the list by LastModified descending and get the first item
$mostRecentBlob = $baselineBlobs | Sort-Object LastModified -Descending | Select-Object -First 1
# Get the name of the most recent blob
$mostRecentBlobName = $mostRecentBlob.Name
LogMessage -LogMessage "The most recent blob with the 'baseline' prefix is: $mostRecentBlobName"
return $mostRecentBlobName
}
}
function ReadDatabaseBaselineFromStorage($ServerName, $BlobName, $ContainerName, $Context) {
# Use Get-AzStorageBlobContent to retrieve the blob content as a string
$blobContent = Get-AzStorageBlobContent -Blob $BlobName -Container $ContainerName -Context $Context
$blobContent = $blobContent.ICloudBlob.DownloadText()
if ([string]::IsNullOrEmpty($blobContent)) {
return
}
return $blobContent
}
function GetBaselineConfigurationForDatabase($ServerName, $DatabaseName, $VaDatabasePolicyStorage, $VaDatabasePolicyContainer) {
# Get storage account context
$ctx = New-AzStorageContext -StorageAccountName $VaDatabasePolicyStorage
# Extract baseline blob name
$blobs = GetBlobsFromStorage -ContainerName $VaDatabasePolicyContainer -Context $ctx
if ([string]::IsNullOrEmpty($blobs)) {
$ex = New-Object System.Exception("Failed to get blobs from $($VaDatabasePolicyStorage) storage. Verify that you have Storage Blob Data Reader role assignment on the storage.")
throw $ex
}
# Extract baseline blob name
$blobName = ExtractBaselineBlobName -ServerName $ServerName -DatabaseName $DatabaseName
if ([string]::IsNullOrEmpty($blobName)) {
LogMessage -LogMessage "No baseline blob was found for $($DatabaseName) database."
return
}
# Extract the baseline
$baseline = ReadDatabaseBaselineFromStorage -ServerName $ServerName -BlobName $blobName -ContainerName $VaDatabasePolicyContainer -Context $ctx
if ([string]::IsNullOrEmpty($baseline)) {
$ex = New-Object System.Exception("Failed to get blobs from $($VaDatabasePolicyStorage) storage. Verify that you have Storage Blob Data Reader role assignment on the storage.")
throw $ex
}
LogMessage -LogMessage "Found baseline for $($DatabaseName) database."
return $baseline
}
function ClearBaselineFolder() {
# Clean baseline folder
$scriptPath = Get-Location
$folderPath = Join-Path -Path $scriptPath.Path -ChildPath "scans"
if (Test-Path $folderPath) {
# Remove folder from previous runs
Remove-Item $folderPath -Recurse
}
}
#######################################################
$VABinaryRules = @("VA1018", "VA1022", "VA1023", "VA1024", "VA1043", "VA1044", "VA1045", "VA1051", "VA1052", "VA1053", "VA1058", "VA1059", "VA1067", "VA1071", "VA1072", "VA1091", "VA1092", "VA1093", "VA1102", "VA1143", "VA1219", "VA1230", "VA1235", "VA1245", "VA1264", "VA1265", "VA1277", "VA1279", "VA1283", "VA2060", "VA2061", "VA2121", "VA2122", "VA2128")
#######################################################
# Connect
$subscription = Connect-AzAccount -Subscription $SubscriptionId
if ([string]::IsNullOrEmpty($subscription))
{
LogError "Failed to get the subscription. Migration cancelled. Fix errors and try again later."
return
}
$srv = Get-AzSqlServer -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if ([string]::IsNullOrEmpty($srv))
{
LogError "The server was not found. Migration cancelled. Fix errors and try again later."
return
}
ClearBaselineFolder
$baselines = @{}
$databases = Get-AzSqlDatabase -ResourceGroupName $ResourceGroupName -ServerName $ServerName | Where-Object { $_.DatabaseName -ne "master" }
$haveVaSetting = HaveVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -Databases $databases
$haveExpressConfigurationVA = HaveExpressConfigurationVulnerabilityAssessmentSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if ($haveExpressConfigurationVA) {
LogMessage -LogMessage "Express configuration vulnerability assessment setting is already exist on this server. Cancelling script."
return
}
if ($haveVaSetting) {
# Get server policy container path
$vaServerSetting = Get-AzSqlServerVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$vaServerPolicyStorage = $vaServerSetting.StorageAccountName
$vaServerPolicyContainer = $vaServerSetting.ScanResultsContainerName
$canRemoveVa = $true
# Go over each database and get the baseline (is exist).
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
LogMessage -LogMessage "Starting to fetch baseline for $($database.DatabaseName) database."
$vaDatabaseSetting = Get-AzSqlDatabaseVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
$adsDatabasePolicy = Get-AzSqlDatabaseAdvancedThreatProtectionSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
$adsDatabasePolicyEnabled = ($null -ne $adsDatabasePolicy.ThreatDetectionState -and $adsDatabasePolicy.ThreatDetectionState -eq "Enabled") -or ($null -ne $adsDatabasePolicy.AdvancedThreatProtectionState -and $adsDatabasePolicy.AdvancedThreatProtectionState -eq "Enabled") # Handle breaking changes in the command.
$containsDatabasePolicy = $adsDatabasePolicyEnabled -and ![string]::IsNullOrEmpty($vaDatabaseSetting.StorageAccountName)
if ($containsDatabasePolicy) {
# The database has database policy. Using the database policy storage.
$vaDatabasePolicyStorage = $vaDatabaseSetting.StorageAccountName
$vaDatabasePolicyContainer = $vaDatabaseSetting.ScanResultsContainerName
}
else {
$vaDatabasePolicyStorage = $vaServerPolicyStorage
$vaDatabasePolicyContainer = $vaServerPolicyContainer
}
try {
$baseline = GetBaselineConfigurationForDatabase -ServerName $ServerName -DatabaseName $database.DatabaseName -VaDatabasePolicyStorage $vaDatabasePolicyStorage -VaDatabasePolicyContainer $vaDatabasePolicyContainer
$baselines[$database.DatabaseName] = $baseline
LogMessage -LogMessage "Finished to fetch baseline for $($database.DatabaseName) database."
}
catch {
LogError "An error occurred: $($_.Exception.Message) while handling $($database.DatabaseName) database."
$canRemoveVa = $false
}
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
LogMessage -LogMessage "Starting to fetch baseline for master database."
$vaSettingMaster = GetSqlVulnerabilityAssessmentMasterSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$vaSettingMaster = ConvertFrom-Json $vaSettingMaster.Content
$adsDatabasePolicy = Get-AzSqlDatabaseAdvancedThreatProtectionSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master"
$adsDatabasePolicyEnabled = ($null -ne $adsDatabasePolicy.ThreatDetectionState -and $adsDatabasePolicy.ThreatDetectionState -eq "Enabled") -or ($null -ne $adsDatabasePolicy.AdvancedThreatProtectionState -and $adsDatabasePolicy.AdvancedThreatProtectionState -eq "Enabled") # Handle breaking changes in the command.
$containsDatabasePolicy = $adsDatabasePolicyEnabled -and ![string]::IsNullOrEmpty($vaSettingMaster.properties.storageContainerPath)
if ($containsDatabasePolicy -and ![string]::IsNullOrEmpty($vaServerPolicyStorage)) {
# The database has database policy. Using the database policy storage.
$vaDatabasePolicyStorage = $vaSettingMaster.properties.storageContainerPath.Split("/")[2].Split(".")[0]
$vaDatabasePolicyContainer = $vaSettingMaster.properties.storageContainerPath.Split("/")[3]
}
else {
$vaDatabasePolicyStorage = $vaServerPolicyStorage
$vaDatabasePolicyContainer = $vaServerPolicyContainer
}
try {
$baseline = GetBaselineConfigurationForDatabase -ServerName $ServerName -DatabaseName "master" -VaDatabasePolicyStorage $vaDatabasePolicyStorage -VaDatabasePolicyContainer $vaDatabasePolicyContainer
$baselines["master"] = $baseline
LogMessage -LogMessage "Finished to fetch baseline for master database."
}
catch {
LogError "An error occurred: $($_.Exception.Message) while handling master database."
$canRemoveVa = $false
}
ClearBaselineFolder
if ($canRemoveVa) {
if (!$Force) {
LogMessage -LogMessage "We are going to remove the current Vulnerability Assessment settings for this server and underlying databases."
$Confirmation = Read-Host -Prompt "Do you approve (y/n)?"
if ($Confirmation -ne "y") {
LogMessage -LogMessage "You chose to stop the migration process. Existing VA settings will not be changed."
return
}
}
# Clear all server and databases policies
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
LogMessage -LogMessage "Clear Vulnerability Assessment setting for '$($database.DatabaseName)' database."
Clear-AzSqlDatabaseVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
# Removing Vulnerability Assessment settings from master db
Retry -action { ClearSqlVulnerabilityAssessmentMasterSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName }
# Removing old server Vulnerability Assessment setting
LogMessage -LogMessage "Clear Vulnerability Assessment setting for '$($ServerName)' server."
Clear-AzSqlServerVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName
}
else {
LogError "Migration cancelled. Fix errors and try again later."
return
}
}
# Set new SQL Vulnerability Assessment Setting
LogMessage -LogMessage "Add express configuration Vulnerability Assessment feature setting for '$($ServerName)' server."
$Response = SetSqlVulnerabilityAssessmentServerSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$successStatusCodes = @(200, 201, 202)
if ($Response.StatusCode -in $successStatusCodes) {
LogMessage -LogMessage "Congratulations, your server '$($ServerName)' server is set up with express configuration Vulnerability Assessment feature"
}
else {
LogMessage -LogMessage "There was a problem to enable express configuration Vulnerability Assessment feature on the '$($ServerName)' server. Error '$($Response.StatusCode)': '$($Response.Content)'"
return
}
# Run a new scan on all the databases
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
LogMessage -LogMessage "Run scan on '$($database.DatabaseName)' database."
Retry -action { RunSqlVulnerabilityAssessmentScanOnUserDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName }
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
LogMessage -LogMessage "Run scan on 'master' database."
Retry -action { RunSqlVulnerabilityAssessmentScanOnSystemDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master" }
LogMessage -LogMessage "Wait for scan results.."
Start-Sleep 60
# Wait for scan results
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
try {
LogMessage -LogMessage "Waiting for results for $($database.DatabaseName) database."
Retry -action { GetSqlVulnerabilityAssessmentScanOnUserDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName }
LogMessage -LogMessage "Received results for $($database.DatabaseName) database."
}
catch {
LogMessage -LogMessage "Failed to get latest scan results for $($database.DatabaseName). Stopping the migration."
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
return
}
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
try {
LogMessage -LogMessage "Waiting for results for master database"
Retry -action { GetSqlVulnerabilityAssessmentScanOnSystemDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master" }
}
catch {
LogMessage -LogMessage "Failed to get latest scan results for master. Stopping the migration"
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
return
}
# Apply baselines from each database
$successMigration = @()
$failedMigration = @()
if (!$haveVaSetting) {
# no need to migrate baseline as there is no baseline to extract.
$successMigration = $databases
}
else {
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
try {
if (![string]::IsNullOrEmpty($baselines[$database.DatabaseName])) {
LogMessage -LogMessage "Applying baseline for '$($database.DatabaseName)' database."
Retry -action { SetSqlVulnerabilityAssessmentBaselineOnUserDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName -Baseline $baselines[$database.DatabaseName] }
}
LogMessage -LogMessage "Baseline was successfully applied for '$($database.DatabaseName)' database."
$successMigration += $database.DatabaseName
}
catch {
LogError "Failed to set baseline for $($database.DatabaseName) database."
$failedMigration += $database.DatabaseName
}
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
try {
if (![string]::IsNullOrEmpty($baselines["master"])) {
LogMessage -LogMessage "Applying baseline for 'master' database."
Retry -action { SetSqlVulnerabilityAssessmentBaselineOnSystemDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master" -Baseline $baselines["master"] }
$successMigration += "master"
}
}
catch {
LogError "Failed to set baseline for master database."
$failedMigration += "master"
}
}
if ($successMigration.Count -eq 0) {
LogError "Failed to set baseline for all the databases."
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
}
elseif ($failedMigration.Count -eq 0) {
LogMessage -LogMessage "The migration process completed successfully."
}
else {
LogMessage -LogMessage "The migration process completed. The migration was successful for $($successMigration -join ',') and unsuccessful for $($failedMigration -join ',')"
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
}
次に例を示します。
Write-Host "----------- Migrating To express configuration example -----------"
$ServerName = "<Your server name>" # The server name.
$SubscriptionId = "<Your subscription>" # The subscription id that the servers belong to.
$ResourceGroupName = "<Your resource group name>" # The resource group name that the servers belong to.
.\MigratingToExpressConfiguration.ps1 -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
次のステップ
Azure PowerShell モジュールの詳細については、Azure PowerShell のドキュメントを参照してください。