次の方法で共有

Hibernate and Sleep with Hyper-V Role Enabled

  • [アーティクル]

Quite a few of us who have installed Windows Server 2008 have found that as soon as you install the hyper-v role hibernate and sleep are disabled. This is because the once hyper-v service is enabled it disables the support for hibernate and sleep.

While there is no way to enable the hibernate or sleep feature while the hyper-v service is running, you can control when the service is started by changing Start parameter of the hvboot service -

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hvboot]

The Start property of a service can have the following values: 0=Boot, 1=System, 2=Auto, 3=Demand, 4=Disabled.

Set the value to 3, so that you can start the service when you want. 0 is not supported for hvboot.

Reboot the server. Hibernate and sleep should now be enabled for you till the time you start the hvboot service.

However, now if you try to start a virtual server in the hyper-v console you will get an error saying that the hyper-v service is not running and you will have to start it manually using the net start command. To do this, start command prompt under administrator privileges and execute the following command to start the service.

net start hvboot

Now you should be able to start your virtual machines. However, as a side effect hibernate and sleep will be disabled till you restart you machine.

___
Tweaking with the registry can be dangerous so for those who want a safe alternative, you can use the following command to set the Start property of the hvboot service as well -

sc config hvboot start= demand

The other values that you can use are system, auto, demand and disabled. Boot is not supported.
Also, note that space between = and demand. The syntax of service config requires this space.
___

Comments

  • Anonymous
    April 10, 2014
    It seems like on Windows 8.1 the Hyper-V Kernel Driver is hvservice instead of hvboot.  However, using demand start no longer restores the power saving options. Any way to do this on Windows 8.1, or Hyper-V and Processor Power Management controls are mutually exclusive?