次の方法で共有

Virtual Machines, BizTalk Configuration and DTC Madness

  • [アーティクル]

Looks like an instance of my stupidly has actually positively impacted the BizTalk 2006 documentation.

I'm teaching a class here in SoCal next week, and just finished building a server farm sitting in
Virtual Server 2005 R2.
I've got myself a nice Active Directory (plus DNS, plus DHCP) box, a server with SQL 2005 installed, and a couple servers
prepped for BizTalk installation by the students. So in typical virtual-development style, I created my first virtual machine, copied the
hard drive, and reused it for a different virtual machine. Now, I was bright enough to remember to change the new machine's
SID using my favorite SID modification tool, NewSID from
SysInternals. I figured that this would be enough to avoid communication problems
among my other boxes. I was wrong.

I spent WAAAY too much time trying to figure out why my attempts to configure BizTalk (which uses MSDTC transactions)
repeatedly failed. I applied every DTC configuration trick in the book, and used some of
the various useful DTC debugging tools such as
DTC Tester and
DTC Ping.
I finally got to the point where I received a message from the DTC Ping tool complaining of duplicate SIDs. I quickly compared the SIDs on my boxes using
GetSID and they were definitely different.

I then stumbled upon a
newsgroup post that told me something I was starting to suspect. The DTC service actually held onto the original SID. The only way
for DTC to see my newly generated SID, was to uninstall DTC and reinstall it.

So, I mentioned my challenges to one of the BizTalk technical writers, and it looks like we'll add something to the Help docs about
sysprepping virtual machines which makes sure a unique SID is generated for use by both the machine, and, MSDTC. Hopefully
my pain is your gain.

Technorati Tags: BizTalk

Comments

  • Anonymous
    May 19, 2006
    Interesting post and thanks for sharing your experience. Such information is really useful (if you can find it though!) and will save someone a lot of hassle.

  • Anonymous
    May 19, 2006
    The comment has been removed

  • Anonymous
    May 19, 2006


    Interesting information if you are trying to create Virtual Servers for
    BizTalk. I did the same...

  • Anonymous
    May 19, 2006
    Hey Adam,  I just did a  "dtc -uninstall" and a "dtc -install".  I played it safe and did it AFTER removing BizTalk and IIS.

  • Anonymous
    May 21, 2006
    Just had the same problem with cloned VMWare hosts.
    The dtc -uninstall, dtc -install worked for me without removing Biztalk or IIS. Although it needed a server reboot before taking affect.

  • Anonymous
    May 23, 2006
    Very similar issue you can run into if deployment boxes were cloned using some disk imaging software. Check out my post for details: http://geekswithblogs.net/paulp/archive/2006/04/06/74517.aspx

  • Anonymous
    May 25, 2006
    Working on a project using Biztalk 2004 in a Virtual enviroment I've seen this issue too. Sysprep solved the problem. I always recomend sysprep to avoid SID issues in Virtual machines.

  • Anonymous
    March 06, 2007
    This is an issue on which I've been chasing my own tail for some time, it seems. Remote deployment of

  • Anonymous
    May 09, 2007
    [Cross-post from old blog.] This is an issue on which I've been chasing my own tail for some time, it