次の方法で共有

HOWTO: IIS 6 Request Processing Basics, Part 1

  • [アーティクル]

Alright, I finally got motivated enough by some questions and circumstances to do this brain-dump of IIS6 Request Processing Internals. I will most likely be missing some details here and there so I welcome followup, but I just want to get something down first and worry about completeness later. Else, I would probably never find the time to finish this...

At a high level, IIS performs a very simple task - for every requested URL, determine a handler to "handle" the request and optionally generate a response (though it is highly suggested to generate a response, for the poor web browser's sake...). Along the way, server-side binary code can execute during various phases of request processing as well as be the "handler" of the request.

How IIS Determines the Handler to handle a Request

What I am going to talk about is the "determination of the handler to handle the request" portion. Note: I am ignoring WebDAV and a couple of other complications for the sake of conceptual clarity.

The request processing sequence looks like the following:

  1. Given a URL, IIS determines the actual resource name, extension, and nearest metadata that determines the applicable "ScriptMaps" (i.e. list of resource extension to handler mappings) property for the resource.

  2. IIS checks if any wildcard application mappings are present in ScriptMaps and if so, invokes the first wildcard application mapping in ORDER from the ScriptMaps property.

    Only when the wildcard application mapping returns and tells IIS "I am NOT handling this request" does IIS invoke the next wildcard application mapping... until IIS either goes through all wildcard application mappings or some wildcard application mapping declares "I AM handling this request".

    If no wildcard application mapping handled the request, continue on; else, consider the request handled.

  3. If no wildcard application mappings declared "I am handling this request", then IIS uses the file extension of the resource and looks through the rest of the ScriptMaps property to locate the appropriate application mapping (if one exists).

    If there is a match, then IIS invokes the script engine of the associated application mapping and considers the request handled.

  4. If no application mapping handles the request and the extension is a couple of hard-coded values including .EXE or .DLL, then IIS will invoke the CGI/ISAPI directly and consider the request handled.

  5. If nothing handled the request yet, the built-in IIS Static File Handler will own the request to tie up the loose ends in the following sequence:

    1. First, the resource is checked for validity to determine if a Courtesy 302 Redirection needs to be sent. If a redirection is sent, then the request is considered handled.
    2. If the resource exists as a file, then the file will be sent as the response and the request is considered handled.
    3. If DefaultDoc is enabled, then the list of DefaultDoc names is searched to locate a possible resource. If a resource is located, then do an internal re-execute of the new DefaultDoc URL (i.e. head back up to the very beginning of this list and start processing again) and consider the request handled.
    4. If DirBrowsing is enabled, then generate a directory listing as the response and consider the request handled.
    5. If the request is still unhandled by this point, then generate the 403.14 (directory browsing is denied) custom error response and send it, handling the request.

For the security conscious - when an ISAPI DLL or CGI EXE is invoked, either as the script engine of a normal application mapping or wildcard application mapping, or directly as-is, the "Web Service Extension Restriction List" kicks in to validate that the ISAPI/CGI is enabled. If not enabled, handle with a 404.2 custom error response.

Likewise, when the Static File Handler decides to send an existent file resource, it looks up the MIMEType for the given resource extension. If it fails to match, then handle with a 404.3 custom error response.

The astute reader should realize that the key difference between a wildcard application mapping and a normal application mapping is that a wildcard application mapping can return "I am NOT handling this request" and pass the request along, while normal application mapping MUST handle the request. This distinction is what makes all ISAPI that are NOT written to be a wildcard application mapping UNABLE to function as a proper wildcard application mapping.

The Loaded IIS Request sequence

Let's look at the entire request process sequence as it applies to a juicy courtesy 302 redirection to a default.document static file which has a known MIME Type defined for ".document".

  1. Client makes request to https://server/vdir
  2. Server executes https://server/vdir and finds no application mappings. The folder exists, so a courtesy 302 redirection to https://server/vdir/ is sent and this finishes this request processing.
  3. Client follows the 302 redirection and makes another request to https://server/vdir/
  4. Server executes https://server/vdir/ and finds no application mappings. Since the resource is not a directory nor does that static file exist, DefaultDoc resolves next and IIS finds default.document.
  5. Server re-executes https://server/vdir/default.document internally on the server. No application mappings are found, the Extension has a known MIME Type, and the static file exists, so IIS serves it as a Static File.

There are lots of possibilities to discuss at this point. I will see where people want to take it...

//David

Comments

  • Anonymous
    November 09, 2005
    Could you comment more on the IIS 6 authentication process? I know that by the time ASP.NET receives a work item in its queue that IIS has already authenticated the user and leaves that token as a part of the queue item.

    Is this authentication and static file handling all handled by Iisw3adm.dll and its subordinates?

  • Anonymous
    November 09, 2005
    Hugh - can you describe what information you are looking for?

    To me, explanation of the authentication process has no relations to your current question, so I do not know what you are asking about.

    And please be clear between authentication and authorization.

    //David

  • Anonymous
    November 17, 2005
    David:

    When I refer to authentication I mean only that. I don't think I mentioned authorization in my question.

    My confusion is about the sequence of events from the time an HTTP request is received by http.sys until it is handed off to an application pool's w3wp.exe worker process (if at all).

    Question One, who does the authentication; the kernel-mode driver or the user-mode worker process? I'm assuming the driver because of its apparent ability to serve static and cached content without loading w3wp.exe.

    Question Two, what is the interprocess bridge between these two?

    Thanks,
    Hugh

  • Anonymous
    November 17, 2005
    The comment has been removed

  • Anonymous
    January 10, 2006
    Your request processing sequence indicates a wildcard application mapping would be able to signal IIS that it isn't going to handle a request, leaving IIS to continue down it's list.

    The question I have is, if I'm using an HttpModule in .NET 2.0 as a wildcard processor, how can I get it to signal that it isn't going to handle a request? I want this module to be activated for every file request (existing or not) but there are certain extensions (like .gif or .cs) that I'd like it to bail out on and pass back to IIS to serve.

    Do you know what method or property I can set to reject certain requests?

    Thanks!

  • Anonymous
    March 20, 2006
    Is it possible to handle virtaul directory (via VirtualPathProvider) with IIS 6? When i used IIS 5.1 everything was ok, but now with IIS 6.0 i can handle only virtual files, but not directories.

  • Anonymous
    March 20, 2006
    DenisV - No reason why it should not work; depends on how you configured IIS to capture those requests into ASP.Net.

    //David

  • Anonymous
    March 20, 2006
    IIS 5.1: In order to handle virtual directory i add new extenson .* and set aspnet_isapi.dll as a handler (MyWebSite -> Properties->Home Directory->Configuration).

    IIS 6.0: It is impossible to do the same (i get error message: wrong extension), so i use wildcard application mecahnism with same handler aspnet_isapi.dll. My application can handle virtual files, but not directories.

  • Anonymous
    March 20, 2006
    The comment has been removed

  • Anonymous
    March 20, 2006
    Of course i had option "Check if File Exists" uncheked. .NET Framework version 2.0.50727.42. I use only default ISAPI filters.

    Detailed situaton:
    I have xml with virtual folders (let it be VirFolder1 and VirFolder2). Each folder has some files. Request http://localhost/VirFolder1/<anyVirtualfile>.aspx">http://localhost/VirFolder1/<anyVirtualfile>.aspx is ok. But http://localhost/VirFolder1/ returns 404 HttpException.  Moreover, my C# code in Virtual Path Provider didn't run.

    Now i decide to check RawUrl in Application_BeginRequest. If this is virtual directory then Response.Redirect(<default page for virtual folder>).

    Thanks for help David.

  • Anonymous
    March 20, 2006
    The comment has been removed

  • Anonymous
    April 26, 2006
    Hi I currently have a IIS 6.0 webserver that is running 350+ websites but for some reason.. after hitting the 300+ mark, the responses of the websites becomes very sluggish and I do not know why and what could be doing this.
    I have check/investigated the processes on the server and there are no activity for each individual application pool that each website is on.
    Is this a request/respond issue with IIS 6.0? or is there something I can do to tweak it so that websites can respond quicker?
    Any type of a reply from you is most appreciated thanks.

    -> Edmund <-

  • Anonymous
    April 28, 2006
    I finally have enough blog entries about various portions of IIS6 request processing that I can stitch...

  • Anonymous
    June 09, 2006
    i hope you can help me. i have tomcat isapi_redirect.dll as isapi filter.
    i have some *.exe in my cgi-dir with basic authentication. when i access the .exe via IE it authenticates me and displays the html output propertly.

    i have a jakarta redirect filter isapi_redirect.dll under the jakarta virtual directory. it also has basic authentication. the web service extension jakarta has a green arrow up which means the tomcat redirect is working.

    but when i tried to input valid user and password (same user and password i used in authenticating cgi-dir), it continuously prompts me for user/password until it returns authentication failure.

    if i set the jakarta /isapi_redirect.dll to anonymous authentication it works.

    what have i done wrong? please help me, i want to make the authentication work on jakarta.

  • Anonymous
    June 09, 2006
    i hope you can help me. i have tomcat isapi_redirect.dll as isapi filter.
    i have some *.exe in my cgi-dir with basic authentication. when i access the .exe via IE it authenticates me and displays the html output propertly.

    i have a jakarta redirect filter isapi_redirect.dll under the jakarta virtual directory. it also has basic authentication. the web service extension jakarta has a green arrow up which means the tomcat redirect is working.

    but when i tried to input valid user and password (same user and password i used in authenticating cgi-dir), it continuously prompts me for user/password until it returns authentication failure.

    if i set the jakarta /isapi_redirect.dll to anonymous authentication it works.

    what have i done wrong? please help me, i want to make the authentication work on jakarta.

    icewalker3d@yahoo.com

  • Anonymous
    June 16, 2006
    Configuring IIS6 in the context of VS.NET (2003). I can't find a lot about IIS6 Application Settings and i don't think you touch on my particular problem in you blog:

    I have a website (www.domain.com) and 3 subfolders/virtual directories virutal1, virtual2, virtual 3. how do i default to www.domain.com/virtual1? ie.. when www.domain.com is typed, browser goes to www.domain.com/virtual com. (There's not really a need for content at the www.domain.com root.)

    I have tried using the redirection settings but to no avail.

    Thanks in advance for any help

  • Anonymous
    August 02, 2006
    The comment has been removed

  • Anonymous
    August 18, 2006
    It's a 10K entry!

    //David

  • Anonymous
    July 08, 2007
    Hi David, QUESTION : IIS is logging 200 instead of 404 in IIS log file Application : ASP IIS version : 6 I have custom error handle - "error.asp" file, which I use to display a user friedly message. For missing files I would like to log 404 in IIS log file. But because I have error.asp file IIS logs it as 200 ok, so I am using:       response.status = "404 Not Found" This works in my Development environment but not in the Test environment. In Development environment its logging: document=9999 - 401 document=9999 - 404 But in Test environment its logging document=9999 - 200 Can you tell me what difference I have in both the IIS because according to me everything looks same? Thanks Twinkle

  • Anonymous
    December 28, 2007
    We have constant deadlocks in IIS (under Windows 2003 Server). Our application involves web service calls. We are in the process of investigating the cause. Is it possible to find out the calls which are causing this deadlock ? We are using the Debugdiag tool currently to check... Thanks in advance

  • Anonymous
    December 28, 2007
    We have constant deadlocks in IIS (under Windows 2003 Server). Our application involves web service calls. We are in the process of investigating the cause. Is it possible to find out the calls which are causing this deadlock ? We are using the Debugdiag tool currently to check... Thanks in advance

  • Anonymous
    December 30, 2007
    Madhu - DebugDiag is able to identify and diagnose deadlocks. //David

  • Anonymous
    February 13, 2008
    I have one IIS 2 tomcats one application in one tomcat one application in another i need to redirect to both application from IIS both tomcat have seperate redirector dlls,seperate workers2.properties and two entry in registry.......... jakarta and jakarta1 are two virtual directories and 2 websites each refering to each virtual.... for 1 IIS to tomcat its workin fine... but i want the other one to IIS is to be done... any one suggest

  • Anonymous
    August 15, 2008
    I am trying to set up some URL rewrite code on an IIS 6.0 serer (httphander). If I set up a virtual directory, with a wild card handler to aspnet_isapi.dll it works fine, with the urlrewriter transforming the URL to variables in aspx. However, if I set up the same wildcard application mapping at the root/website level, the wild card handler does not seem to fire and I get a 404 error. Any reason why?

  • Anonymous
    September 02, 2008
    Вот именно с этой статьи начинаю читать этот блог. +1 подписчик :)

  • Anonymous
    January 08, 2009
    Hi David, I am really stuck and have spent hours trying to figure this out. I have IIS6 running in IIS5 isolation mode. I've checked and recheked for any application mappings and simply cannot download a zip file. Is there a possibility that because I am on the same network that somehow I am being authenticated - i have only anonymouse acces enabled? Could isape rewrite be interfering ? I've tried both .exe and .zip and neither work. I have checked the logs and I have 200 0 0 for http status codes I've checked and do not have url scan installed (at least as far as I can tell) I'm tortured here trying to figure this out - any suggestions/direction would be most appreciated.