Condividi tramite


UWF_Volume

Questa classe gestisce un volume protetto da UWF (Unified Write Filter).

Sintassi

class UWF_Volume {
    [key, Read] boolean CurrentSession;
    [key, Read] string DriveLetter;
    [key, Read] string VolumeName;
    [Read, Write] boolean BindByDriveLetter;
    [Read] boolean CommitPending;
    [Read, Write] boolean Protected;

    UInt32 CommitFile([in] string FileFullPath);
    UInt32 CommitFileDeletion(string FileName);
    UInt32 Protect();
    UInt32 Unprotect();
    UInt32 SetBindByDriveLetter(boolean bBindByVolumeName);
    UInt32 AddExclusion(string FileName);
    UInt32 RemoveExclusion(string FileName);
    UInt32 RemoveAllExclusions();
    UInt32 FindExclusion([in] string FileName, [out] bFound);
    UInt32 GetExclusions([out, EmbeddedInstance("UWF_ExcludedFile")] string ExcludedFiles[]);

};

Membri

Nelle tabelle seguenti sono elencati i metodi e le proprietà che appartengono a questa classe.

Metodi

Metodo Descrizione
UWF_Volume.AddExclusion Aggiunge un file o una cartella all'elenco di esclusione di file per un volume protetto daUWF.
UWF_Volume.CommitFile Esegue il commit delle modifiche dalla sovrimpressione al volume fisico per un file specificato in un volume protetto da Unified Write Filter (UWF).
UWF_Volume.CommitFileDeletion Elimina un file protetto dal volume ed esegue il commit dell'eliminazione nel volume fisico.
UWF_Volume.FindExclusion Determina se un file o una cartella specifica è incluso nell'elenco di esclusione per un volume protetto daUWF.
UWF_Volume.GetExclusions Recupera un elenco di tutte le esclusioni di file per un volume protetto daUWF.
UWF_Volume.Protect Protegge il volume dopo il successivo riavvio del sistema, se UWF è abilitato dopo il riavvio.
UWF_Volume.RemoveAllExclusions Rimuove tutti i file e le cartelle dall'elenco di esclusione di file per un volume protetto da UWF.
UWF_Volume.RemoveExclusion Rimuove un file o una cartella specifica dall'elenco di esclusione di file per un volume protetto daUWF.
UWF_Volume.SetBindByDriveLetter Imposta la proprietà BindByDriveLetter , che indica se il volume UWF è associato al volume fisico in base alla lettera di unità o al nome del volume.
UWF_Volume.Unprotect Disabilita la protezione UWF del volume dopo il successivo riavvio del sistema.

Proprietà

Proprietà Tipo di dati Qualificazioni Descrizione
BindByDriveLetter Booleano [lettura, scrittura] Indica il tipo di associazione utilizzato dal volume.
- True per associare il volume tramite DriveLetter(binding libero)
- False per associare il volume in base a VolumeName (binding stretto).
CommitPending Booleano [lettura] Riservato per l'uso microsoft.
CurrentSession Booleano [chiave, lettura] Indica la sessione per cui l'oggetto contiene le impostazioni.
- True se le impostazioni sono relative alla sessione
- correnteFalse se le impostazioni riguardano la sessione successiva che segue un riavvio.
DriveLetter stringa [chiave, lettura] Lettera di unità del volume. Se il volume non ha una lettera di unità, questo valore è NULL.
Protetto Booleano [lettura, scrittura] Se CurrentSession è true, indica se il volume è attualmente protetto da UWF.
Se CurrentSession è false, indica se il volume è protetto nella sessione successiva dopo il riavvio del dispositivo.
VolumeName stringa [chiave, lettura] Identificatore univoco del volume nel sistema corrente. VolumeName corrisponde alla proprietà DeviceID della classe Win32_Volume per il volume.

Osservazioni

È necessario usare un account amministratore per modificare le proprietà o chiamare i metodi che modificano le impostazioni di configurazione.

Attivare o disattivare la protezione UWF

Nell'esempio seguente viene illustrato come proteggere o rimuovere la protezione di un volume con UWF usando il provider Strumentazione gestione Windows (WMI) in uno script di PowerShell.

PowerShellscript crea una funzione, Set-ProtectVolume, che attiva o disattiva la protezione UWF per un volume. Lo script illustra quindi come usare la funzione .

$COMPUTER = "localhost"
$NAMESPACE = "root\standardcimv2\embedded"

# Define common parameters

$CommonParams = @{"namespace"=$NAMESPACE; "computer"=$COMPUTER}

# Create a function to protect or unprotect a volume based on the drive letter of the volume

function Set-ProtectVolume($driveLetter, [bool] $enabled) {

# Each volume has two entries in UWF_Volume, one for the current session and one for the next session after a restart
# You can only change the protection status of a drive for the next session

    $nextConfig = Get-WMIObject -class UWF_Volume @CommonParams |
        where {
            $_.DriveLetter -eq "$driveLetter" -and $_.CurrentSession -eq $false
        };

# If a volume entry is found for the drive letter, enable or disable protection based on the $enabled parameter

    if ($nextConfig) {

        Write-Host "Setting drive protection on $driveLetter to $enabled"

        if ($Enabled -eq $true) {
            $nextConfig.Protect() | Out-Null;
        } else {
            $nextConfig.Unprotect() | Out-Null;
        }
    }

# If the drive letter does not match a volume, create a new UWF_volume instance

    else {
    Write-Host "Error: Could not find $driveLetter. Protection is not enabled."
    }
}

# The following sample commands demonstrate how to use the Set-ProtectVolume function
# to protect and unprotect volumes

Set-ProtectVolume "C:" $true
Set-ProtectVolume "D:" $true

Set-ProtectVolume "C:" $false

Gestire le esclusioni di file e cartelle UWF

Nell'esempio seguente viene illustrato come gestire le esclusioni di file e cartelle UWF usando il provider WMI in uno script di PowerShell. Lo script di PowerShell crea quattro funzioni e quindi illustra come usarle.

La prima funzione , Get-FileExclusions, visualizza un elenco di esclusioni di file UWF presenti in un volume. Vengono visualizzate le esclusioni per la sessione corrente e la sessione successiva successiva a un riavvio.

La seconda funzione, Add-FileExclusion, aggiunge un file o una cartella all'elenco di esclusione UWF per un determinato volume. L'esclusione viene aggiunta per la sessione successiva che segue un riavvio.

La terza funzione , Remove-FileExclusion, rimuove un file o una cartella dall'elenco di esclusione UWF per un determinato volume. L'esclusione viene rimossa per la sessione successiva che segue un riavvio.

La quarta funzione , Clear-FileExclusions, rimuove tutte le esclusioni di file E cartelle UWF da un determinato volume. Le esclusioni vengono rimosse per la sessione successiva che segue un riavvio.

$COMPUTER = "localhost"
$NAMESPACE = "root\standardcimv2\embedded"

# Define common parameters

$CommonParams = @{"namespace"=$NAMESPACE; "computer"=$COMPUTER}

function Get-FileExclusions($driveLetter) {

# This function lists the UWF file exclusions for a volume, both
# for the current session as well as the next session after a restart

# $driveLetter is the drive letter of the volume

# Get the UWF_Volume configuration for the current session

    $currentConfig = Get-WMIObject -class UWF_Volume @CommonParams |
        where {
            $_.DriveLetter -eq "$driveLetter" -and $_.CurrentSession -eq $true
        };

# Get the UWF_Volume configuration for the next session after a restart

    $nextConfig = Get-WMIObject -class UWF_Volume @CommonParams |
        where {
            $_.DriveLetter -eq "$driveLetter" -and $_.CurrentSession -eq $false
        };

# Display file exclusions for the current session

    if ($currentConfig) {

        Write-Host "The following files and folders are currently excluded from UWF filtering for $driveLetter";

        $currentExcludedList = $currentConfig.GetExclusions()

        if ($currentExcludedList) {
            foreach ($fileExclusion in $currentExcludedList.ExcludedFiles)  {
                Write-Host "  " $fileExclusion.FileName
            }
        } else {
            Write-Host "  None"
        }
    } else {
        Write-Error "Could not find drive $driveLetter";
}

# Display file exclusions for the next session after a restart

    if ($nextConfig) {

        Write-Host ""
        Write-Host "The following files and folders will be excluded from UWF filtering for $driveLetter after the next restart:";

        $nextExcludedList = $nextConfig.GetExclusions()

        if ($nextExcludedList) {
            foreach ($fileExclusion in $nextExcludedList.ExcludedFiles)  {
                Write-Host "  " $fileExclusion.FileName
            }
        } else {
            Write-Host "  None"
        }

        Write-Host ""
    }
}

function Add-FileExclusion($driveLetter, $exclusion) {

# This function adds a new UWF file exclusion to a volume
# The new file exclusion takes effect the next time the device is restarted and UWF is enabled

# $driveLetter is the drive letter of the volume
# $exclusion is the path and filename of the file or folder exclusion

# Get the configuration for the next session for the volume

    $nextConfig = Get-WMIObject -class UWF_Volume @CommonParams |
        where {
            $_.DriveLetter -eq "$driveLetter" -and $_.CurrentSession -eq $false
        };

# Add the exclusion

    if ($nextConfig) {
        $nextConfig.AddExclusion($exclusion) | Out-Null;
        Write-Host "Added exclusion $exclusion for $driveLetter";
    } else {
        Write-Error "Could not find drive $driveLetter";
    }
}

function Remove-FileExclusion($driveLetter, $exclusion) {

# This function removes a UWF file exclusion from a volume
# The file exclusion is removed the next time the device is restarted

# $driveLetter is the drive letter of the volume
# $exclusion is the path and filename of the file or folder exclusion

# Get the configuration for the next session for the volume

    $nextConfig = Get-WMIObject -class UWF_Volume @CommonParams |
        where {
            $_.DriveLetter -eq "$driveLetter" -and $_.CurrentSession -eq $false
        };

# Try to remove the exclusion

    if ($nextConfig) {
        try {
            $nextConfig.RemoveExclusion($exclusion) | Out-Null;
            Write-Host "Removed exclusion $exclusion for $driveLetter";
        } catch {
            Write-Host "Could not remove exclusion $exclusion on drive $driveLetter"
        }
    } else {
        Write-Error "Could not find drive $driveLetter";
    }
}

function Clear-FileExclusions($driveLetter) {

# This function removes all UWF file exclusions on a volume
# The file exclusions are removed the next time the device is restarted

# $driveLetter is the drive letter of the volume

# Get the configuration for the next session for the volume

    $nextConfig = Get-WMIObject -class UWF_Volume @CommonParams |
        where {
            $_.DriveLetter -eq "$driveLetter" -and $_.CurrentSession -eq $false
        };

# Remove all file and folder exclusions

    if ($nextConfig) {
        $nextConfig.RemoveAllExclusions() | Out-Null;
        Write-Host "Cleared all exclusions for $driveLetter";
    } else {
        Write-Error "Could not clear exclusions for drive $driveLetter";
    }
}

# Some examples of using the functions

Clear-FileExclusions "C:"

Add-FileExclusion "C:" "\Users\Public\Public Documents"
Add-FileExclusion "C:" "\myfolder\myfile.txt"

Get-FileExclusions "C:"

Remove-FileExclusion "C:" "\myfolder\myfile.txt"

Get-FileExclusions "C:"

Requisiti

Edizione di Windows Supportato
Windows Home No
Windows Pro No
Windows Enterprise
Windows Education
Windows IoT Enterprise