Condividi tramite

OID_WW_CDPD_CS_CALLBACK

  • Articolo

As a query, the OID_WW_CDPD_CS_CALLBACK OID requests the miniport driver to return the current configuration information of the callback feature for circuit-switched CDPD.

As a set, this OID requests the miniport driver to set the current configuration of the callback feature for circuit-switched CDPD to the stated values.

In either case, this request uses a WW_CDPD_CS_CALLBACK structure, defined as follows:

    typedef struct _WW_CDPD_CS_CALLBACK {
         UINT Enabled;
         NDIS_VAR_DATA_DESC Number;
 
    } WW_CDPD_CS_CALLBACK;

The members of this structure contain the following information:

  • Enabled
    Specifies one of the following:

    Value Meaning

    0

    Callback capability is disabled.

    1

    Callback capability is enabled.

    -1

    Unknown. If this value is specified for a set, the miniport driver returns NDIS_STATUS_INVALID_DATA.

     

  • Number
    Describes a buffer that contains the dial code that the circuit-switched CDPD network uses to call back the NIC. This dial code is encoded per circuit-switched CDPD implementation guidelines The maximum length of the dial code is 20 bytes.

The Numbermember is of type NDIS_VAR_DATA_DESC, which was defined previously. The buffer contains a network-ordered sequence of binary byte values.

Indications are irrelevant for this OID.

Note   This OID is not available for use beginning with Windows Vista.

 

 

 

Send comments about this topic to Microsoft