Device.BusController Testing
This section describes how to test USB or Bluetooth bus controllers and certify them for use on Windows® as part of the Windows Certification Program. To begin the testing part of the certification process, you must install and run the Windows Hardware Certification Kit (Windows HCK) and set up your testing environment. For information about how to install and configure Windows HCK, see Step 1: Install Controller and Studio on the test server.
This section includes:
| Topic | Details |
|---|---|
This topic describes testing prerequisites and specific setup procedures that you must follow before you test your Bluetooth controller. |
|
This topic describes testing prerequisites and specific setup procedures that you must follow before you test your proximity controller. |
|
This topic describes testing prerequisites and specific setup procedures that you must follow before you test your secure digital host controller. |
|
This topic describes testing prerequisites and specific setup procedures that you must follow before you test your USB host controller. |
|
This topic provides overall Device.BusController troubleshooting information. |
|
This section includes documentation for every bus controller test in the Windows HCK. |
|
This topic provides set up instructions for WITT I2C tests. |
For test-specific prerequisites or troubleshooting details, review individual test topics.
Note
For Windows HCK testing best practices and tips to avoid common failures, see Troubleshooting the Windows HCK Environment.