Condividi tramite

Driver Robustness Test

  • Articolo

This automated test validates the robustness of a scanner driver’s implementation of its exported functions (IStiUSD and IWiaMiniDrv interfaces) by attacking it, stressing and generally trying to expose weaknesses, memory leaks, and so on.

Note  

This is not a mandatory test for certification.

 

Test details

Associated requirements

Device.Imaging.Scanner.Base.errorHandling

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~2 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Scanner Testing Prerequisites.

In addition, the Wdk\ConfigureScanner dimension must be added to the computer pool before running this test.

To add the scanner dimension to the computer pool:

  1. From the Windows Hardware Certification Kit (Windows HCK) Studio, open Job Monitor.

  2. Select the computer pool containing the test computer that the test device is attached to.

  3. Right click and open the properties page, and then select MCU Policy tab.

  4. From the Available dimension list select Wdk\ConfigureScanner, add it to the machine pool, and click Ok.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Imaging Testing

 

 

Send comments about this topic to Microsoft