Condividi tramite


IPv6 Logo Test (Verify IGD loopback is supported)

This test verifies that a network router includes loopback functionality.

Test details

Associated requirements

Device.Network.Router.NATLoopback

See the device hardware requirements.

Platforms

Windows 7 (x86) Windows 8 (x86) Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup on both computers as described in the test requirements: Router Testing (Non-wireless) Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Network Testing.

More information

Parameters

Parameter Description

IPAddress1

The IP address of the primary server.

IPAddress2

The IP address of the secondary server.

 

Command syntax

Command Description

Ipv6test.exe /a [ipaddress1] /b [ipaddress2] /t loop

Runs the test.

 

Note  

For command-line help for this test binary, type /h.

 

File list

File Location

Ipv6test.exe

<[testbinroot]>\nttest\

Ipv6srv.exe

<[testbinroot]>\nttest\

 

 

 

Send comments about this topic to Microsoft