Condividi tramite

Windows Touch Noise Suppression Test

  • Articolo

This test verifies that a Windows® Touch device does not report data for locations where touch input does not occur.

Test details

Associated requirements

Device.Digitizer.Touch.NoiseSuppression

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification Functional Reliability

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Windows Touch Testing Prerequisites.

This test can help to ensure that touch systems can effectively tolerate common environmental conditions.

This test presents two scenarios: the only distinction between the two scenarios is the power source. For the Battery portion of the test, you should remove the external power source from a mobile system.

In each case, the test validates that a contact that is held at the minimum required distance from the screen does not register any touch contacts.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Digitizer Testing and How to run the Windows HCK Tests for Touch and Pen Devices.

More information

Command syntax

Command option Description

Logo3.exe -config NoiseSuppression.json

Runs the test.

 

File list

File Location

Logo3.exe

<testbinroot>\digitizer\Win8Touch

NoiseSuppression.json

<testbinroot>\digitizer\Win8Touch

 

How to run the Windows HCK Tests for Touch and Pen Devices

 

 

Send comments about this topic to Microsoft