Condividi tramite

Accelerometer Sensor Shake Event Test (System)

  • Articolo

This test detects high-frequency content in the accelerometer due to a shake.

This is a system-specific implementation of an existing test. For more information on this test, see Accelerometer Sensor Shake Event Test.

Test details

Associated requirements

System.Client.Sensor.Integrated

See the system hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification Functional

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Sensor Device Testing Prerequisites

If a shake event is supported by the accelerometer sensor, you are asked to initiate some action to cause the shake event to occur. The test then verifies if the shake event has the intended event ID.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Input Testing.

 

 

Send comments about this topic to Microsoft