Condividi tramite

MF Video Capture Stress base - System

  • Articolo

This test validates that applications can Record, Take Photo, and Preview for a 20 to 30 minute time period.

Test details

Associated requirements

System.Client.Webcam.Device

See the system hardware requirements.

Platforms

Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~30 minutes

Categories

Certification Reliability

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting System Client Testing.

Error Description/Workaround

0x8004005 : E_FAIL

The most often occurrence of this error code is during the verification of the Recorded file for Video or Photo. This will occur if the resulting file contains no data because it did not receive samples.

Check to ensure the device is producing valid samples when it enters the run state. Valid includes that the sample is the right size, format, and time for when it was produced

0x80070102

This will occur when a Capture Asynchronous Operation has timed out. These include Initialize, Start Preview, Stop Preview, Start Record, Stop Record, Take Photo, and Change Mediatype. The test allows for 9-10 seconds for each operation before failing. Mediatype change can include pin tear down and bring up time.

Check that the device isn’t waiting for future commands that prevent it from changing state. Ensure that all buffers are flushed out of the device on device reset commands.

0xC00D3704 : MF_E_HW_MFT_FAILED_START_STREAMING

This error occurs when the device cannot enter the run state.

Check that the device is able to transition through all states without failure, or that other pins aren’t preventing the device from entering a state.

Multiple cameras might prevent each other from streaming due to bus allocation failure. Please ensure that each camera has enough bandwidth to stream. This can be impaired by other devices using the same bus, including other cameras.

0xC00D4A44 : MF_E_SINK_NO_SAMPLES_PROCESSED

This error occurs during finalization of files, if no samples have been delivered.

Check to ensure the device is producing valid samples when it enters the run state. Valid includes that the sample is the right size, format, and time for when it was produced.

 

 

 

Send comments about this topic to Microsoft