Sensor PowerState Test (ARM)
This test validates that sensors will enter and leave power states at the appropriate time.
Test details
Associated requirements |
Device.Input.Sensor.Base.PowerState |
Platforms |
Windows RT 8.1 |
Expected run time |
~2 minutes |
Categories |
Basic Certification |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Sensor Device Testing Prerequisites.
If this test is being run against a GPS sensor device node, make sure that you are running the test in an environment in which you can receive a GPS signal.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Input Testing.
A GPS signal is required if the sensor under test is GPS.
You must enable all location privacy settings.
Close all apps and services that use sensors before running the test.