Test.DeviceBezel
This test verifies that the bezel around the touchpad meets the requirements.
Test details
Associated requirements |
Device.Input.PrecisionTouchpad.Hardware.Bezel System.Client.PrecisionTouchpad.PrecisionTouchpad |
Platforms |
Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~2 minutes |
Categories |
Certification |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Mouse or other Pointing Device Testing Prerequisites.
If the touchpad surface is at all above the surrounding casing of the touchpad, press F fail the test. Else, move to the next step.
Place a 1.5mm wide piece of plastic (or other non-conductive material) on the surface of the touchpad, such that the plastic does not touch the surrounding casing of the touchpad.
- If the touchpad and the plastic is lower than the surrounding casing, press F to fail the test. If the touchpad surface is anywhere, press P to pass.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Input Testing.
More information
Command syntax
| Command | Description |
|---|---|
ptlogo.exe Test.DeviceBezel.json |
Runs the test. |
File list
| File | Location |
|---|---|
ptlogo.exe |
<testbinroot>\input\PrecisionTouchpad\ |
config.json |
<testbinroot>\input\PrecisionTouchpad\ |
Test.DeviceBezel.json |
<testbinroot>\input\PrecisionTouchpad\ |