Bluetooth - Downlevel - Bluetooth LE Dual-Mode Logo Tests (Windows 8)
This automated test examines the Bluetooth certification requirements and verifies that the controller that you’re testing is using valid Bluetooth 4.0 specifications. This test requires 3 computers. The first computer acts as the primary and the other two acts as secondary. The tests are copied locally to the WTTJobsWorking directory.
Test details
Associated requirements |
Device.BusController.Bluetooth.Base.4LeSpecification Device.BusController.Bluetooth.Base.SimultaneousBrEdrAndLeTraffic |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) |
Expected run time |
~15 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Bluetooth Controller Testing Prerequisites.
Enabling collection of Event Tracing for Windows (ETW) traces assists with diagnosing test failures.
These traces capture the HCI traffic sent to and from the Bluetooth stack. They can be decoded using Netmon and the Bluetooth ETW parsers. It is recommended to first investigate the issue internally using these traces or some other method of capturing over-the-air traces because many controller/stack inter-operability issues can be observed in these traces.
You can view the collected logs using Netmon and the Bluetooth NPL parsers. These parsers can be obtained through installing the WDK.
Troubleshooting
For troubleshooting information, see Troubleshooting Bus Controller Testing.
More information
Parameters
| Parameter | Description |
|---|---|
ENABLETRACING |
Enables collection of ETW traces. If True, the ETW traces are enabled on the collection. If False, the ETW traces on the collection are turned off. Default value: False |