Procedura: selezionare l'input penna da un controllo personalizzato
Aggiungendo un oggetto IncrementalLassoHitTester al controllo personalizzato, è possibile abilitare quest'ultimo in modo che l'utente possa selezionare l'input penna mediante lo strumento lazo, analogamente al modo in cui l'oggetto InkCanvas seleziona l'input penna con un lazo.
In questo esempio si presuppone che l'utente sia in grado di creare un controllo personalizzato abilitato per l'input penna. Per creare un controllo personalizzato che supporti l'input penna, vedere Creazione di un controllo di input penna.
Esempio
Quando l'utente utilizza lo strumento lazo, l'oggetto IncrementalLassoHitTester è in grado di anticipare quali tratti si troveranno all'interno dei confini del lazo al termine dell'operazione. I tratti che si troveranno all'interno dei confini del lazo possono essere considerati selezionati e, come tali, potranno anche essere deselezionati. Ad esempio, se l'utente cambia direzione mentre utilizza lo strumento lazo, è possibile che l'oggetto IncrementalLassoHitTester causi la deselezione di alcuni tratti.
L'oggetto IncrementalLassoHitTester genera l'evento SelectionChanged, che abilita la risposta del controllo personalizzato mentre l'utente utilizza lo strumento lazo. È ad esempio possibile modificare l'aspetto dei tratti mentre vengono selezionati e deselezionati.
Gestione della modalità input penna
Per l'utente è utile che il lazo sia diverso rispetto all'input penna sul controllo. A tale scopo, è necessario utilizzare lo strumento personalizzato per tenere traccia del fatto che l'utente scriva o selezioni l'input penna. Il modo più semplice per ottenere questo risultato consiste nel dichiarare un'enumerazione con due valori, uno per indicare che l'utente scrive l'input penna e un altro per indicare che l'utente seleziona l'input penna.
' Enum that keeps track of whether StrokeCollectionDemo is in ink mode
' or select mode.
Public Enum InkMode
Ink
[Select]
End Enum 'InkMode
// Enum that keeps track of whether StrokeCollectionDemo is in ink mode
// or select mode.
public enum InkMode
{
Ink, Select
}
Aggiungere quindi due oggetti DrawingAttributes alla classe, uno da utilizzare quando l'utente scrive l'input penna e l'altro quando l'utente seleziona l'input penna. Nel costruttore, inizializzare l'oggetto DrawingAttributes e collegare entrambi gli eventi AttributeChanged allo stesso gestore eventi, quindi impostare la proprietà DrawingAttributes dell'oggetto DynamicRenderer sull'input penna DrawingAttributes.
Private inkDA As DrawingAttributes
Private selectDA As DrawingAttributes
...
' In the constructor.
' Selection drawing attributes use dark gray ink.
selectDA = New DrawingAttributes()
selectDA.Color = Colors.DarkGray
' ink drawing attributes use default attributes
inkDA = New DrawingAttributes()
inkDA.Width = 5
inkDA.Height = 5
AddHandler inkDA.AttributeChanged, _
AddressOf DrawingAttributesChanged
AddHandler selectDA.AttributeChanged, _
AddressOf DrawingAttributesChanged
DrawingAttributes inkDA;
DrawingAttributes selectDA;
...
// In the constructor.
// Selection drawing attributes use dark gray ink.
selectDA = new DrawingAttributes();
selectDA.Color = Colors.DarkGray;
// ink drawing attributes use default attributes
inkDA = new DrawingAttributes();
inkDA.Width = 5;
inkDA.Height = 5;
inkDA.AttributeChanged += new PropertyDataChangedEventHandler(DrawingAttributesChanged);
selectDA.AttributeChanged += new PropertyDataChangedEventHandler(DrawingAttributesChanged);
Aggiungere una proprietà che espone la modalità di selezione. Quando l'utente cambia la modalità di selezione, impostare la proprietà DrawingAttributes dell'oggetto DynamicRenderer sull'oggetto DrawingAttributes appropriato, quindi ricollegare la proprietà RootVisual all'oggetto InkPresenter.
' Property to indicate whether the user is inputting or
' selecting ink.
Public Property Mode() As InkMode
Get
Return Mode
End Get
Set(ByVal value As InkMode)
modeState = value
' Set the DrawingAttributes of the DynamicRenderer
If modeState = InkMode.Ink Then
renderer.DrawingAttributes = inkDA
Else
renderer.DrawingAttributes = selectDA
End If
' Reattach the visual of the DynamicRenderer to the InkPresenter.
presenter.DetachVisuals(renderer.RootVisual)
presenter.AttachVisuals(renderer.RootVisual, renderer.DrawingAttributes)
End Set
End Property
// Property to indicate whether the user is inputting or
// selecting ink.
public InkMode Mode
{
get
{
return mode;
}
set
{
mode = value;
// Set the DrawingAttributes of the DynamicRenderer
if (mode == InkMode.Ink)
{
renderer.DrawingAttributes = inkDA;
}
else
{
renderer.DrawingAttributes = selectDA;
}
// Reattach the visual of the DynamicRenderer to the InkPresenter.
presenter.DetachVisuals(renderer.RootVisual);
presenter.AttachVisuals(renderer.RootVisual, renderer.DrawingAttributes);
}
}
Esporre l'oggetto DrawingAttributes come proprietà affinché le applicazioni possano determinare l'aspetto dei tratti di input penna e selezione.
' Property to allow the user to change the pen's DrawingAttributes.
Public ReadOnly Property InkDrawingAttributes() As DrawingAttributes
Get
Return inkDA
End Get
End Property
' Property to allow the user to change the Selector'newStroke DrawingAttributes.
Public ReadOnly Property SelectDrawingAttributes() As DrawingAttributes
Get
Return selectDA
End Get
End Property
// Property to allow the user to change the pen's DrawingAttributes.
public DrawingAttributes InkDrawingAttributes
{
get
{
return inkDA;
}
}
// Property to allow the user to change the Selector'newStroke DrawingAttributes.
public DrawingAttributes SelectDrawingAttributes
{
get
{
return selectDA;
}
}
Quando una proprietà di un oggetto DrawingAttributes cambia, è necessario ricollegare la proprietà RootVisual all'oggetto InkPresenter. Nel gestore dell'evento AttributeChanged, ricollegare la proprietà RootVisual all'oggetto InkPresenter.
Private Sub DrawingAttributesChanged(ByVal sender As Object, _
ByVal e As PropertyDataChangedEventArgs)
' Reattach the visual of the DynamicRenderer to the InkPresenter
' whenever the DrawingAttributes change.
presenter.DetachVisuals(renderer.RootVisual)
presenter.AttachVisuals(renderer.RootVisual, _
renderer.DrawingAttributes)
End Sub 'DrawingAttributesChanged
void DrawingAttributesChanged(object sender, PropertyDataChangedEventArgs e)
{
// Reattach the visual of the DynamicRenderer to the InkPresenter
// whenever the DrawingAttributes change.
presenter.DetachVisuals(renderer.RootVisual);
presenter.AttachVisuals(renderer.RootVisual, renderer.DrawingAttributes);
}
Utilizzo di IncrementalLassoHitTester
Creare e inizializzare un oggetto StrokeCollection contenente i tratti selezionati.
' StylusPointCollection that collects the stylus points from the stylus events.
Private stylusPoints As StylusPointCollection
// StylusPointCollection that collects the stylus points from the stylus events.
StylusPointCollection stylusPoints;
Quando l'utente inizia a disegnare un tratto, che si tratti di un input penna o di un lazo, deselezionare eventuali tratti selezionati. Se l'utente disegna un lazo, creare un oggetto IncrementalLassoHitTester chiamando GetIncrementalLassoHitTester, sottoscrivere l'evento SelectionChanged e chiamare AddPoints. Questo codice può essere un metodo separato e può essere chiamato dai metodi OnStylusDown e OnMouseDown.
Private Sub InitializeHitTester(ByVal collectedPoints As StylusPointCollection)
' Deselect any selected strokes.
Dim selectedStroke As Stroke
For Each selectedStroke In selectedStrokes
selectedStroke.DrawingAttributes.Color = inkDA.Color
Next selectedStroke
selectedStrokes.Clear()
If modeState = InkMode.Select Then
' Remove the previously drawn lasso, if it exists.
If Not (lassoPath Is Nothing) Then
presenter.Strokes.Remove(lassoPath)
lassoPath = Nothing
End If
selectionTester = presenter.Strokes.GetIncrementalLassoHitTester(80)
AddHandler selectionTester.SelectionChanged, AddressOf selectionTester_SelectionChanged
selectionTester.AddPoints(collectedPoints)
End If
End Sub 'InitializeHitTester
private void InitializeHitTester(StylusPointCollection collectedPoints)
{
// Deselect any selected strokes.
foreach (Stroke selectedStroke in selectedStrokes)
{
selectedStroke.DrawingAttributes.Color = inkDA.Color;
}
selectedStrokes.Clear();
if (mode == InkMode.Select)
{
// Remove the previously drawn lasso, if it exists.
if (lassoPath != null)
{
presenter.Strokes.Remove(lassoPath);
lassoPath = null;
}
selectionTester =
presenter.Strokes.GetIncrementalLassoHitTester(80);
selectionTester.SelectionChanged +=
new LassoSelectionChangedEventHandler(selectionTester_SelectionChanged);
selectionTester.AddPoints(collectedPoints);
}
}
Aggiungere i punti dello stilo all'oggetto IncrementalLassoHitTester mentre l'utente disegna il lazo. Chiamare il metodo seguente dai metodi OnStylusMove, OnStylusUp, OnMouseMove e OnMouseLeftButtonUp.
Private Sub AddPointsToHitTester(ByVal collectedPoints As StylusPointCollection)
If modeState = InkMode.Select AndAlso _
Not selectionTester Is Nothing AndAlso _
selectionTester.IsValid Then
' When the control is selecting strokes, add the
' stylus packetList to selectionTester.
selectionTester.AddPoints(collectedPoints)
End If
End Sub 'AddPointsToHitTester
private void AddPointsToHitTester(StylusPointCollection collectedPoints)
{
if (mode == InkMode.Select &&
selectionTester != null &&
selectionTester.IsValid)
{
// When the control is selecting strokes, add the
// stylus packetList to selectionTester.
selectionTester.AddPoints(collectedPoints);
}
}
Gestire l'evento IncrementalLassoHitTester.SelectionChanged in risposta alla selezione e alla deselezione dei tratti da parte dell'utente. La classe LassoSelectionChangedEventArgs ha le proprietà SelectedStrokes e DeselectedStrokes che consentono di ottenere rispettivamente i tratti selezionati e deselezionati.
Private Sub selectionTester_SelectionChanged(ByVal sender As Object, _
ByVal args As LassoSelectionChangedEventArgs)
' Change the color of all selected strokes to red.
Dim selectedStroke As Stroke
For Each selectedStroke In args.SelectedStrokes
selectedStroke.DrawingAttributes.Color = Colors.Red
selectedStrokes.Add(selectedStroke)
Next selectedStroke
' Change the color of all unselected strokes to
' their original color.
Dim unselectedStroke As Stroke
For Each unselectedStroke In args.DeselectedStrokes
unselectedStroke.DrawingAttributes.Color = inkDA.Color
selectedStrokes.Remove(unselectedStroke)
Next unselectedStroke
End Sub 'selectionTester_SelectionChanged
void selectionTester_SelectionChanged(object sender,
LassoSelectionChangedEventArgs args)
{
// Change the color of all selected strokes to red.
foreach (Stroke selectedStroke in args.SelectedStrokes)
{
selectedStroke.DrawingAttributes.Color = Colors.Red;
selectedStrokes.Add(selectedStroke);
}
// Change the color of all unselected strokes to
// their original color.
foreach (Stroke unselectedStroke in args.DeselectedStrokes)
{
unselectedStroke.DrawingAttributes.Color = inkDA.Color;
selectedStrokes.Remove(unselectedStroke);
}
}
Quando l'utente completa il disegno del lazo, annullare la sottoscrizione dell'evento SelectionChanged e chiamare il metodo EndHitTesting.
If modeState = InkMode.Select AndAlso lassoPath Is Nothing Then
' Add the lasso to the InkPresenter and add the packetList
' to selectionTester.
lassoPath = newStroke
lassoPath.DrawingAttributes = selectDA.Clone()
presenter.Strokes.Add(lassoPath)
RemoveHandler selectionTester.SelectionChanged, _
AddressOf selectionTester_SelectionChanged
selectionTester.EndHitTesting()
End If
if (mode == InkMode.Select && lassoPath == null)
{
// Add the lasso to the InkPresenter and add the packetList
// to selectionTester.
lassoPath = newStroke;
lassoPath.DrawingAttributes = selectDA.Clone();
presenter.Strokes.Add(lassoPath);
selectionTester.SelectionChanged -= new LassoSelectionChangedEventHandler
(selectionTester_SelectionChanged);
selectionTester.EndHitTesting();
}
Riepilogo.
Nell'esempio riportato di seguito viene illustrato un controllo personalizzato che consente all'utente di selezionare l'input penna con lo strumento lazo.
Imports System
Imports System.Windows
Imports System.Windows.Controls
Imports System.Windows.Media
Imports System.Windows.Input
Imports System.Windows.Input.StylusPlugIns
Imports System.Windows.Ink
' Enum that keeps track of whether StrokeCollectionDemo is in ink mode
' or select mode.
Public Enum InkMode
Ink
[Select]
End Enum 'InkMode
' This control allows the user to input and select ink. When the
' user selects ink, the lasso remains visible until they erase, or clip
' the selected strokes, or clear the selection. When the control is
' in selection mode, strokes that are selected turn red.
Public Class InkSelector
Inherits Label
Private modeState As InkMode
Private inkDA As DrawingAttributes
Private selectDA As DrawingAttributes
Private presenter As InkPresenter
Private selectionTester As IncrementalLassoHitTester
Private selectedStrokes As New StrokeCollection()
' StylusPointCollection that collects the stylus points from the stylus events.
Private stylusPoints As StylusPointCollection
' Stroke that represents the lasso.
Private lassoPath As Stroke
Private renderer As DynamicRenderer
Public Sub New()
modeState = InkMode.Ink
' Use an InkPresenter to display the strokes on the custom control.
presenter = New InkPresenter()
Me.Content = presenter
' In the constructor.
' Selection drawing attributes use dark gray ink.
selectDA = New DrawingAttributes()
selectDA.Color = Colors.DarkGray
' ink drawing attributes use default attributes
inkDA = New DrawingAttributes()
inkDA.Width = 5
inkDA.Height = 5
AddHandler inkDA.AttributeChanged, _
AddressOf DrawingAttributesChanged
AddHandler selectDA.AttributeChanged, _
AddressOf DrawingAttributesChanged
' Add a DynmaicRenderer to the control so ink appears
' to "flow" from the tablet pen.
renderer = New DynamicRenderer()
renderer.DrawingAttributes = inkDA
Me.StylusPlugIns.Add(renderer)
presenter.AttachVisuals(renderer.RootVisual, _
renderer.DrawingAttributes)
End Sub 'New
Shared Sub New()
' Allow ink to be drawn only within the bounds of the control.
Dim owner As Type = GetType(InkSelector)
ClipToBoundsProperty.OverrideMetadata(owner, _
New FrameworkPropertyMetadata(True))
End Sub 'New
' Prepare to collect stylus packets. If Mode is set to Select,
' get the IncrementalHitTester from the InkPresenter'newStroke
' StrokeCollection and subscribe to its StrokeHitChanged event.
Protected Overrides Sub OnStylusDown(ByVal e As StylusDownEventArgs)
MyBase.OnStylusDown(e)
Stylus.Capture(Me)
' Create a new StylusPointCollection using the StylusPointDescription
' from the stylus points in the StylusDownEventArgs.
stylusPoints = New StylusPointCollection()
Dim eventPoints As StylusPointCollection = e.GetStylusPoints(Me, stylusPoints.Description)
stylusPoints.Add(eventPoints)
InitializeHitTester(eventPoints)
End Sub 'OnStylusDown
Protected Overrides Sub OnMouseLeftButtonDown(ByVal e As MouseButtonEventArgs)
MyBase.OnMouseLeftButtonDown(e)
Mouse.Capture(Me)
If Not (e.StylusDevice Is Nothing) Then
Return
End If
Dim pt As Point = e.GetPosition(Me)
Dim collectedPoints As New StylusPointCollection(New Point() {pt})
stylusPoints = New StylusPointCollection()
stylusPoints.Add(collectedPoints)
InitializeHitTester(collectedPoints)
End Sub 'OnMouseLeftButtonDown
Private Sub InitializeHitTester(ByVal collectedPoints As StylusPointCollection)
' Deselect any selected strokes.
Dim selectedStroke As Stroke
For Each selectedStroke In selectedStrokes
selectedStroke.DrawingAttributes.Color = inkDA.Color
Next selectedStroke
selectedStrokes.Clear()
If modeState = InkMode.Select Then
' Remove the previously drawn lasso, if it exists.
If Not (lassoPath Is Nothing) Then
presenter.Strokes.Remove(lassoPath)
lassoPath = Nothing
End If
selectionTester = presenter.Strokes.GetIncrementalLassoHitTester(80)
AddHandler selectionTester.SelectionChanged, AddressOf selectionTester_SelectionChanged
selectionTester.AddPoints(collectedPoints)
End If
End Sub 'InitializeHitTester
' Collect the stylus packets as the stylus moves.
Protected Overrides Sub OnStylusMove(ByVal e As StylusEventArgs)
If stylusPoints Is Nothing Then
Return
End If
Dim collectedPoints As StylusPointCollection = e.GetStylusPoints(Me, stylusPoints.Description)
stylusPoints.Add(collectedPoints)
AddPointsToHitTester(collectedPoints)
End Sub 'OnStylusMove
Protected Overrides Sub OnMouseMove(ByVal e As MouseEventArgs)
MyBase.OnMouseMove(e)
If Not (e.StylusDevice Is Nothing) Then
Return
End If
If e.LeftButton = MouseButtonState.Released Then
Return
End If
If stylusPoints Is Nothing Then
stylusPoints = New StylusPointCollection()
End If
Dim pt As Point = e.GetPosition(Me)
Dim collectedPoints As New StylusPointCollection(New Point() {pt})
stylusPoints.Add(collectedPoints)
AddPointsToHitTester(collectedPoints)
End Sub 'OnMouseMove
Private Sub AddPointsToHitTester(ByVal collectedPoints As StylusPointCollection)
If modeState = InkMode.Select AndAlso _
Not selectionTester Is Nothing AndAlso _
selectionTester.IsValid Then
' When the control is selecting strokes, add the
' stylus packetList to selectionTester.
selectionTester.AddPoints(collectedPoints)
End If
End Sub 'AddPointsToHitTester
' When the user lifts the stylus, create a Stroke from the
' collected stylus points and add it to the InkPresenter.
' When the control is selecting strokes, add the
' point data to the IncrementalHitTester.
Protected Overrides Sub OnStylusUp(ByVal e As StylusEventArgs)
If stylusPoints Is Nothing Then
stylusPoints = New StylusPointCollection()
End If
Dim collectedPoints As StylusPointCollection = _
e.GetStylusPoints(Me, stylusPoints.Description)
stylusPoints.Add(collectedPoints)
AddPointsToHitTester(collectedPoints)
AddStrokeToPresenter()
stylusPoints = Nothing
Stylus.Capture(Nothing)
End Sub 'OnStylusUp
Protected Overrides Sub OnMouseLeftButtonUp(ByVal e As MouseButtonEventArgs)
MyBase.OnMouseLeftButtonUp(e)
If Not (e.StylusDevice Is Nothing) Then
Return
End If
If stylusPoints Is Nothing Then
stylusPoints = New StylusPointCollection()
End If
Dim pt As Point = e.GetPosition(Me)
Dim collectedPoints As New StylusPointCollection(New Point() {pt})
stylusPoints.Add(collectedPoints)
AddPointsToHitTester(collectedPoints)
AddStrokeToPresenter()
stylusPoints = Nothing
Mouse.Capture(Nothing)
End Sub 'OnMouseLeftButtonUp
Private Sub AddStrokeToPresenter()
Dim newStroke As New Stroke(stylusPoints)
If modeState = InkMode.Ink Then
' Add the stroke to the InkPresenter.
newStroke.DrawingAttributes = inkDA.Clone()
presenter.Strokes.Add(newStroke)
End If
If modeState = InkMode.Select AndAlso lassoPath Is Nothing Then
' Add the lasso to the InkPresenter and add the packetList
' to selectionTester.
lassoPath = newStroke
lassoPath.DrawingAttributes = selectDA.Clone()
presenter.Strokes.Add(lassoPath)
RemoveHandler selectionTester.SelectionChanged, _
AddressOf selectionTester_SelectionChanged
selectionTester.EndHitTesting()
End If
End Sub 'AddStrokeToPresenter
Private Sub selectionTester_SelectionChanged(ByVal sender As Object, _
ByVal args As LassoSelectionChangedEventArgs)
' Change the color of all selected strokes to red.
Dim selectedStroke As Stroke
For Each selectedStroke In args.SelectedStrokes
selectedStroke.DrawingAttributes.Color = Colors.Red
selectedStrokes.Add(selectedStroke)
Next selectedStroke
' Change the color of all unselected strokes to
' their original color.
Dim unselectedStroke As Stroke
For Each unselectedStroke In args.DeselectedStrokes
unselectedStroke.DrawingAttributes.Color = inkDA.Color
selectedStrokes.Remove(unselectedStroke)
Next unselectedStroke
End Sub 'selectionTester_SelectionChanged
' Property to indicate whether the user is inputting or
' selecting ink.
Public Property Mode() As InkMode
Get
Return Mode
End Get
Set(ByVal value As InkMode)
modeState = value
' Set the DrawingAttributes of the DynamicRenderer
If modeState = InkMode.Ink Then
renderer.DrawingAttributes = inkDA
Else
renderer.DrawingAttributes = selectDA
End If
' Reattach the visual of the DynamicRenderer to the InkPresenter.
presenter.DetachVisuals(renderer.RootVisual)
presenter.AttachVisuals(renderer.RootVisual, renderer.DrawingAttributes)
End Set
End Property
Private Sub DrawingAttributesChanged(ByVal sender As Object, _
ByVal e As PropertyDataChangedEventArgs)
' Reattach the visual of the DynamicRenderer to the InkPresenter
' whenever the DrawingAttributes change.
presenter.DetachVisuals(renderer.RootVisual)
presenter.AttachVisuals(renderer.RootVisual, _
renderer.DrawingAttributes)
End Sub 'DrawingAttributesChanged
' Property to allow the user to change the pen's DrawingAttributes.
Public ReadOnly Property InkDrawingAttributes() As DrawingAttributes
Get
Return inkDA
End Get
End Property
' Property to allow the user to change the Selector'newStroke DrawingAttributes.
Public ReadOnly Property SelectDrawingAttributes() As DrawingAttributes
Get
Return selectDA
End Get
End Property
End Class 'InkSelector
using System;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Media;
using System.Windows.Input;
using System.Windows.Input.StylusPlugIns;
using System.Windows.Ink;
// Enum that keeps track of whether StrokeCollectionDemo is in ink mode
// or select mode.
public enum InkMode
{
Ink, Select
}
// This control allows the user to input and select ink. When the
// user selects ink, the lasso remains visible until they erase, or clip
// the selected strokes, or clear the selection. When the control is
// in selection mode, strokes that are selected turn red.
public class InkSelector : Label
{
InkMode mode;
DrawingAttributes inkDA;
DrawingAttributes selectDA;
InkPresenter presenter;
IncrementalLassoHitTester selectionTester;
StrokeCollection selectedStrokes = new StrokeCollection();
// StylusPointCollection that collects the stylus points from the stylus events.
StylusPointCollection stylusPoints;
// Stroke that represents the lasso.
Stroke lassoPath;
DynamicRenderer renderer;
public InkSelector()
{
mode = InkMode.Ink;
// Use an InkPresenter to display the strokes on the custom control.
presenter = new InkPresenter();
this.Content = presenter;
// In the constructor.
// Selection drawing attributes use dark gray ink.
selectDA = new DrawingAttributes();
selectDA.Color = Colors.DarkGray;
// ink drawing attributes use default attributes
inkDA = new DrawingAttributes();
inkDA.Width = 5;
inkDA.Height = 5;
inkDA.AttributeChanged += new PropertyDataChangedEventHandler(DrawingAttributesChanged);
selectDA.AttributeChanged += new PropertyDataChangedEventHandler(DrawingAttributesChanged);
// Add a DynmaicRenderer to the control so ink appears
// to "flow" from the tablet pen.
renderer = new DynamicRenderer();
renderer.DrawingAttributes = inkDA;
this.StylusPlugIns.Add(renderer);
presenter.AttachVisuals(renderer.RootVisual,
renderer.DrawingAttributes);
}
static InkSelector()
{
// Allow ink to be drawn only within the bounds of the control.
Type owner = typeof(InkSelector);
ClipToBoundsProperty.OverrideMetadata(owner,
new FrameworkPropertyMetadata(true));
}
// Prepare to collect stylus packets. If Mode is set to Select,
// get the IncrementalHitTester from the InkPresenter'newStroke
// StrokeCollection and subscribe to its StrokeHitChanged event.
protected override void OnStylusDown(StylusDownEventArgs e)
{
base.OnStylusDown(e);
Stylus.Capture(this);
// Create a new StylusPointCollection using the StylusPointDescription
// from the stylus points in the StylusDownEventArgs.
stylusPoints = new StylusPointCollection();
StylusPointCollection eventPoints = e.GetStylusPoints(this, stylusPoints.Description);
stylusPoints.Add(eventPoints);
InitializeHitTester(eventPoints);
}
protected override void OnMouseLeftButtonDown(MouseButtonEventArgs e)
{
base.OnMouseLeftButtonDown(e);
Mouse.Capture(this);
if (e.StylusDevice != null)
{
return;
}
Point pt = e.GetPosition(this);
StylusPointCollection collectedPoints = new StylusPointCollection(new Point[] { pt });
stylusPoints = new StylusPointCollection();
stylusPoints.Add(collectedPoints);
InitializeHitTester(collectedPoints);
}
private void InitializeHitTester(StylusPointCollection collectedPoints)
{
// Deselect any selected strokes.
foreach (Stroke selectedStroke in selectedStrokes)
{
selectedStroke.DrawingAttributes.Color = inkDA.Color;
}
selectedStrokes.Clear();
if (mode == InkMode.Select)
{
// Remove the previously drawn lasso, if it exists.
if (lassoPath != null)
{
presenter.Strokes.Remove(lassoPath);
lassoPath = null;
}
selectionTester =
presenter.Strokes.GetIncrementalLassoHitTester(80);
selectionTester.SelectionChanged +=
new LassoSelectionChangedEventHandler(selectionTester_SelectionChanged);
selectionTester.AddPoints(collectedPoints);
}
}
// Collect the stylus packets as the stylus moves.
protected override void OnStylusMove(StylusEventArgs e)
{
if (stylusPoints == null)
{
return;
}
StylusPointCollection collectedPoints = e.GetStylusPoints(this, stylusPoints.Description);
stylusPoints.Add(collectedPoints);
AddPointsToHitTester(collectedPoints);
}
protected override void OnMouseMove(MouseEventArgs e)
{
base.OnMouseMove(e);
if (e.StylusDevice != null)
{
return;
}
if (e.LeftButton == MouseButtonState.Released)
{
return;
}
if (stylusPoints == null)
{
stylusPoints = new StylusPointCollection();
}
Point pt = e.GetPosition(this);
StylusPointCollection collectedPoints = new StylusPointCollection(new Point[] { pt });
stylusPoints.Add(collectedPoints);
AddPointsToHitTester(collectedPoints);
}
private void AddPointsToHitTester(StylusPointCollection collectedPoints)
{
if (mode == InkMode.Select &&
selectionTester != null &&
selectionTester.IsValid)
{
// When the control is selecting strokes, add the
// stylus packetList to selectionTester.
selectionTester.AddPoints(collectedPoints);
}
}
// When the user lifts the stylus, create a Stroke from the
// collected stylus points and add it to the InkPresenter.
// When the control is selecting strokes, add the
// point data to the IncrementalHitTester.
protected override void OnStylusUp(StylusEventArgs e)
{
if (stylusPoints == null)
{
stylusPoints = new StylusPointCollection();
}
StylusPointCollection collectedPoints =
e.GetStylusPoints(this, stylusPoints.Description);
stylusPoints.Add(collectedPoints);
AddPointsToHitTester(collectedPoints);
AddStrokeToPresenter();
stylusPoints = null;
Stylus.Capture(null);
}
protected override void OnMouseLeftButtonUp(MouseButtonEventArgs e)
{
base.OnMouseLeftButtonUp(e);
if (e.StylusDevice != null) return;
if (stylusPoints == null) stylusPoints = new StylusPointCollection();
Point pt = e.GetPosition(this);
StylusPointCollection collectedPoints = new StylusPointCollection(new Point[] { pt });
stylusPoints.Add(collectedPoints);
AddPointsToHitTester(collectedPoints);
AddStrokeToPresenter();
stylusPoints = null;
Mouse.Capture(null);
}
private void AddStrokeToPresenter()
{
Stroke newStroke = new Stroke(stylusPoints);
if (mode == InkMode.Ink)
{
// Add the stroke to the InkPresenter.
newStroke.DrawingAttributes = inkDA.Clone();
presenter.Strokes.Add(newStroke);
}
if (mode == InkMode.Select && lassoPath == null)
{
// Add the lasso to the InkPresenter and add the packetList
// to selectionTester.
lassoPath = newStroke;
lassoPath.DrawingAttributes = selectDA.Clone();
presenter.Strokes.Add(lassoPath);
selectionTester.SelectionChanged -= new LassoSelectionChangedEventHandler
(selectionTester_SelectionChanged);
selectionTester.EndHitTesting();
}
}
void selectionTester_SelectionChanged(object sender,
LassoSelectionChangedEventArgs args)
{
// Change the color of all selected strokes to red.
foreach (Stroke selectedStroke in args.SelectedStrokes)
{
selectedStroke.DrawingAttributes.Color = Colors.Red;
selectedStrokes.Add(selectedStroke);
}
// Change the color of all unselected strokes to
// their original color.
foreach (Stroke unselectedStroke in args.DeselectedStrokes)
{
unselectedStroke.DrawingAttributes.Color = inkDA.Color;
selectedStrokes.Remove(unselectedStroke);
}
}
// Property to indicate whether the user is inputting or
// selecting ink.
public InkMode Mode
{
get
{
return mode;
}
set
{
mode = value;
// Set the DrawingAttributes of the DynamicRenderer
if (mode == InkMode.Ink)
{
renderer.DrawingAttributes = inkDA;
}
else
{
renderer.DrawingAttributes = selectDA;
}
// Reattach the visual of the DynamicRenderer to the InkPresenter.
presenter.DetachVisuals(renderer.RootVisual);
presenter.AttachVisuals(renderer.RootVisual, renderer.DrawingAttributes);
}
}
void DrawingAttributesChanged(object sender, PropertyDataChangedEventArgs e)
{
// Reattach the visual of the DynamicRenderer to the InkPresenter
// whenever the DrawingAttributes change.
presenter.DetachVisuals(renderer.RootVisual);
presenter.AttachVisuals(renderer.RootVisual, renderer.DrawingAttributes);
}
// Property to allow the user to change the pen's DrawingAttributes.
public DrawingAttributes InkDrawingAttributes
{
get
{
return inkDA;
}
}
// Property to allow the user to change the Selector'newStroke DrawingAttributes.
public DrawingAttributes SelectDrawingAttributes
{
get
{
return selectDA;
}
}
}