New-NetQosPolicy
Creates a new network QoS policy.
Syntax
New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-IPDstPrefixMatchCondition <String>]
[-UserMatchCondition <String>]
[-AppPathNameMatchCondition <String>]
[-IPProtocolMatchCondition <Protocol>]
[-IPSrcPrefixMatchCondition <String>]
[-IPSrcPortMatchCondition <UInt16>]
[-IPSrcPortStartMatchCondition <UInt16>]
[-IPSrcPortEndMatchCondition <UInt16>]
[-IPDstPortMatchCondition <UInt16>]
[-IPDstPortStartMatchCondition <UInt16>]
[-IPDstPortEndMatchCondition <UInt16>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-UserMatchCondition <String>]
[-AppPathNameMatchCondition <String>]
[-IPProtocolMatchCondition <Protocol>]
-IPPortMatchCondition <UInt16>
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
-PriorityValue8021Action <SByte>
-NetDirectPortMatchCondition <UInt16>
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-DSCPAction <SByte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
-URIMatchCondition <String>
[-URIRecursiveMatchCondition <Boolean>]
[-IPDstPrefixMatchCondition <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-Cluster]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-SMB]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-NFS]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-LiveMigration]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-iSCSI]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
-PriorityValue8021Action <SByte>
[-FCOE]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] New-NetQosPolicy
[-PolicyStore <String>]
[-Name] <String>
[-Default]
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The New-NetQosPolicy cmdlet creates a new network Quality of Service (QoS) policy. A QoS policy consists of two main parts: match conditions also known as filters, and actions. Match conditions such as the name by which an application is run in Windows Server® 2012 and later or a TCP port number decide to what traffic the policy is relating. Parameters such as DSCPAction and ThrottleRateAction determine how the policy is to handle the matched traffic. Besides match conditions and actions, there are also some general parameters such as NetworkProfile and Precedence that the users can customize for a QoS policy.
A list of well-known match conditions, or filters, in the form of parameters is provided: FCoE, Cluster (3343), LiveMigration (6600), iSCSI (3260), NFS (2049), and SMB (445). Each of them matches a well-known TCP port specified in the brackets. The only exception is FCoE, which matches EtherType 0x8906. These filters must be used alone for filtering purpose. In other words, they cannot be mixed with other match condition parameters.
QoS policies can be stored in multiple locations. Users can choose a location by specifying the PolicyStore parameter. If the PolicyStore parameter is not specified, then the new policy is added to local computer (localhost). If a policy is stored in ActiveStore, then the policy will not persist after reboot.
Examples
Example 1: Create a QoS policy
PS C:\> New-NetQosPolicy -Name "SMB Policy" -SMB -PriorityValue8021Action 3
Name : SMB Policy
Owner : Group Policy (Machine)
NetworkProfile : All
Precedence : 127
Template : SMB
PriorityValue : 3This command creates a QoS policy named SMB Policy that classifies SMB traffic and tags it with 802.1p priority value of 3. The SMB parameter is a built-in filter that matches TCP port 445, which is reserved for SMB.
Example 2: Create a QoS policy that matches an application
PS C:\> New-NetQosPolicy -Name "FTP" -AppPathNameMatchCondition "ftp.exe" -ThrottleRateActionBitsPerSecond 1MB -PolicyStore ActiveStore
Name : FTP
Owner : PowerShell / WMI
NetworkProfile : All
Precedence : 127
AppPathName : ftp.exe
ThrottleRate : 1.049 MBits/secThis command creates a QoS policy named FTP that matches an application path at ftp.exe and throttles the traffic at 8,000,000 bits per second. This policy is ActiveStore. This means that it is not persistent after restart of the computer.
Example 3: Create a QoS policy that matches traffic to a subnet
PS C:\> New-NetQosPolicy -Name "Backup" -IPDstPrefixMatchCondition "10.1.1.176/28" -NetworkProfile Domain -DSCPAction 40
Name : Backup
Owner : Group Policy (Machine)
NetworkProfile : Domain
Precedence : 127
IPProtocol : Both
IPDstPrefix : 10.1.1.176/28
DSCPValue : 40This command creates a QoS policy named Backup that matches traffic sent to 10.1.1.176/28 subnet and tags it with DSCP value of 40. This policy is effective only on traffic sent on a domain-joined network adapter.
Example 4: Create a QoS policy that matches traffic sent to a port
PS C:\> New-NetQosPolicy -Name "HTTP" -IPPort 80 -IPProtocol TCP -ThrottleRateActionBitsPerSecond 10MB
Name : HTTP
Owner : Group Policy (Machine)
NetworkProfile : All
Precedence : 127
IPProtocol : TCP
IPPort : 80
ThrottleRate : 10.486 MBits/secThis command creates a QoS policy that matches TCP traffic sent to port 80 and rate-limits it at 80,000,000 bits per second.
Example 5: Create a default QoS policy
PS C:\> New-NetQosPolicy -Name "Wildcard" -Default -MinBandwidthWeightAction 30
Name : wildcard
Owner : Group Policy (Machine)
NetworkProfile : All
Precedence : 127
Template : Default
MinBandwidthWeight : 30This command creates a QoS policy named Wildcard that catches all the traffic that does not match a specific QoS policy and assigns a minimum bandwidth weight of 30 to such traffic.
Example 6: Create a QoS policy that matches return traffic from an application
PS C:\> New-NetQosPolicy -Name "IIS" -URIMatchCondition "http://training" -ThrottleRateActionBitsPerSecond 500KB
Name : IIS
Owner : Group Policy (Machine)
NetworkProfile : Domain
Precedence : 127
URI : http://training/
URIRecursive : False
ThrottleRate : 516.096 KBits/secThis command creates a QoS policy named IIS that matches return traffic from an HTTP server application with the specified URI and rate limit the return traffic at 4,000,000 bits per second.
Parameters
-AppPathNameMatchCondition
Specifies the name by which an application is run, such as application.exe or %ProgramFiles%\application.exeapplication.
| Type: | String |
| Aliases: | AppPathName, ApplicationName, app |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Cluster
Specifies the Microsoft Windows Cluster service, which uses the Cluster network driver TCP/UDP port 3343.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Default
Specifies a wildcard filter that can be used to capture all traffic that is not matched by any other filter. One use case is that a user can create a QoS policy for a specific application using the AppPathNameMatchCondition parameter and create another QoS policy for all other applications using this parameter. Another use case is that a user can create several QoS policies, each of which specifies a minimum bandwidth action for the filtered traffic, and create one additional policy using this parameter to assign a minimum bandwidth action for all other traffic.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DSCPAction
Specifies the differentiated services code point (DSCP) value. The acceptable values for this parameter are: 0 through 63.
| Type: | SByte |
| Aliases: | DSCPValue, DSCP |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-FCOE
Specifies the Fibre Channel over Ethernet (FCoE), which uses a dedicated EtherType 0x8914. If this parameter is specified, then the Windows Server® 2012 and later will instruct the network adapters in the computer that support FCoE to match the FCoE packets and apply the action specified in the policy.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPDstPortEndMatchCondition
Specifies the last port in a range of destination ports to be used to match the network traffic. This parameter must be used in conjunction with the IPDstPortStartMatchCondition parameter. The value of this parameter also must be larger than the value of the IPDstPortStartMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPDstPortEnd |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPDstPortMatchCondition
Specifies the exact destination port to be used to match the network traffic. The filter of a QoS policy can be based on either a single port or a range of ports. To specify a single destination port, use this parameter. To specify a range of destination ports, use both the IPDstPortStartMatchCondition and the IPDstPortEndMatchCondition parameters.
| Type: | UInt16 |
| Aliases: | IPDstPort, DestinationPort, dp, dstport, destport |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPDstPortStartMatchCondition
Specifies the first port in a range of destination ports to be used to match the network traffic. This parameter must be used in conjunction with the IPDstPortEndMatchCondition parameter. The value of this parameter also must be smaller than the value of the IPDstPortEndMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPDstPortStart |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPDstPrefixMatchCondition
Specifies the destination IP address, optionally with a network prefix, such as 1.2.3.4, 3ffe:ffff::1, 192.168.1.0/24, or fe80::1234/48.
| Type: | String |
| Aliases: | IPDstPrefix, DestinationAddress, da, dst, dstaddr, dstip, dest, destaddr, destip |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPPortMatchCondition
Specifies the port to be used to match the network traffic, it can be either source port or destination port. If either the source port or the destination port in a packet matches the value of this parameter, then the QoS policy will apply to the packet. Usually this is a well-known port that a client uses to communicate with a server. With this parameter specified, the same QoS policy can be configured on both the clients and the servers and apply to the traffic in both directions. For example, specifying the IPPortMatchCondition parameter value of 80 matches HTTP traffic sent by both HTTP clients and HTTP servers.
| Type: | UInt16 |
| Aliases: | IPPort, port |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPProtocolMatchCondition
Specifies the IP protocol to be used to match the network traffic. The acceptable values for this parameter are: TCP, UDP, or Both. If this parameter is unspecified, then Both is the default condition. The QoS policy will apply to both TCP and UDP traffic.
| Type: | Protocol |
| Aliases: | IPProtocol, Protocol |
| Accepted values: | None, TCP, UDP, Both |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPSrcPortEndMatchCondition
Specifies the last port in a range of source ports to be used to match the network traffic. This parameter must be used in conjunction with the IPSrcPortStartMatchCondition parameter. The value of this parameter also must be larger than the value of the IPSrcPortStartMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPSrcPortEnd |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPSrcPortMatchCondition
Specifies the exact source port to be used to match the network traffic. The filter of a QoS policy can be based on either a single port or a range of ports. To specify a single source port, use this parameter. To specify a range of source ports, use both the IPSrcPortStartMatchCondition and the IPSrcPortEndMatchCondition parameters.
| Type: | UInt16 |
| Aliases: | IPSrcPort, SourcePort, sp, srcport |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPSrcPortStartMatchCondition
Specifies the first port in a range of source ports to be used to match the network traffic. This parameter must be used in conjunction with the IPSrcPortEndMatchCondition parameter. The value of this parameter also must be smaller than the value of the IPSrcPortEndMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPSrcPortStart |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPSrcPrefixMatchCondition
Specifies the source IP address, optionally with a network prefix, such as 1.2.3.4, 3ffe:ffff::1, 192.168.1.0/24, or fe80::1234/48.
| Type: | String |
| Aliases: | IPSrcPrefix, SourceAddress, sa, src, srcaddr, srcip |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-iSCSI
Specifies the internet small computer system interface (iSCSI), which uses the dedicated TCP port 3260.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LiveMigration
Specifies the Microsoft live migration, which uses the well-known TCP port 6600.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MinBandwidthWeightAction
Specifies a numerical value for minimum bandwidth that a flow should get relatively. The actual bandwidth a flow gets will depend on the weights assigned to other flows in the computer. The acceptable values for this parameter are: 1 through 100.
| Type: | Byte |
| Aliases: | MinBandwidthWeight, minbww, weight |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Specifies the QoS policy name. This name must be unique for a QoS policy.
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NetDirectPortMatchCondition
Specifies the network direct port to be used to match the network traffic. Network Direct uses an independent port space from the TCP or UDP port space. Windows Server 2012 and later will send a Network Direct policy to a network adapter only if the network adapter supports Network Direct.
| Type: | UInt16 |
| Aliases: | NetDirectPort, ndport, networkdirectport |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NetworkProfile
Specifies the profile, or connection type, of a network, such as Domain. The acceptable values for this parameter are: Domain, Public, Private, or All. If this parameter is not specified, then the QoS policy will be effective when a computer is connected on any type of connection.
| Type: | NetworkProfile |
| Accepted values: | Domain, Public, Private, All |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NFS
Specifies the network file system, which uses the dedicated TCP port 2049.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PolicyStore
Specifies the location of the policy that is stored. The acceptable values for this parameter are:
- ActiveStore
- COMPUTERNAME
- GPO:COMPUTERNAME -- GPO:DOMAIN\GPONAME -- LDAP://LDAP-URL
If a policy is stored in ActiveStore, then the policy does not persist after restart.
| Type: | String |
| Aliases: | store |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Precedence
Specifies the priority of a QoS policy. A higher priority policy will trump a lower priority policy in case the policies are conflicting. The acceptable values for this parameter are: 0 through 255. 255 represents the highest priority and 0 represents the lowest. If not specified, then the default value is 127.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PriorityValue8021Action
Specifies the IEEE 802.1p value. The acceptable values for this parameter are: 0 through 7.
| Type: | SByte |
| Aliases: | PriorityValue, PriorityValue8021, pri, dot1p |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SMB
Specifies the server message block, which uses the dedicated TCP port 445.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleRateActionBitsPerSecond
Specifies a throttle rate in bits per second to set the maximum bandwidth that can be consumed.
| Type: | UInt64 |
| Aliases: | ThrottleRateAction, ThrottleRate, Throttle, maxbw |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-URIMatchCondition
Specifies the URI to match.
Only a HTTP URL is currently supported, such as http://myhost, https://*/training, http://myhost:8080/training, or https://myhost:*/training.
The QoS policy will only apply to the traffic sent from HTTP server applications to HTTP clients in response to the requests from the client for the specified URI.
| Type: | String |
| Aliases: | URI, url |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-URIRecursiveMatchCondition
Specifies that all subdirectories and files following the URI specified in the URIMatchCondition parameter are to be included. This parameter can be specified only if the URIMatchCondition parameter is specified.
| Type: | Boolean |
| Aliases: | URIRecursive, urlrecursive, recursive |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-UserMatchCondition
Specifies the user or group name in Active Directory, such as contoso\DavidChew.
This parameter is usually specified with another filtering parameter such as the AppPathNameMatchCondition parameter.
| Type: | String |
| Aliases: | User, sid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
Microsoft.PowerShell.Cmdletization.GeneratedTypes.NetQosPolicy.NetworkProfile
Microsoft.PowerShell.Cmdletization.GeneratedTypes.NetQosPolicy.Protocol