API NuGet in Visual Studio

Articolo
08/10/2023

Oltre all'interfaccia utente e alla console di Gestione pacchetti in Visual Studio, NuGet esporta anche alcuni servizi utili che possono essere usati da altre estensioni. Queste interfacce consentono ad altri componenti in Visual Studio di interagire con NuGet, che può essere usato per installare e disinstallare i pacchetti e ottenere informazioni sui pacchetti installati.

NuGet fornisce servizi tramite due tecnologie diverse, ognuna delle quali ha le interfacce definite in un pacchetto NuGet diverso. I servizi meno recenti di NuGet sono disponibili tramite Managed Extensibility Framework (MEF), disponibili nel pacchetto NuGet.VisualStudio (passare ai servizi MEF di NuGet). Sono disponibili API più recenti, progettate per essere utilizzabili con async il codice, disponibili nel pacchetto NuGet.VisualStudio.Contracts, usando i servizi negoziati di IServiceBroker NuGet .

Versioni dei pacchetti

Il prodotto NuGet segue la versione di Visual Studio, ma è la versione 11.0 sottostante. Ad esempio, NuGet 6.0 corrisponde a Visual Studio 2022 17.0, NuGet 5.11 corrisponde a Visual Studio 2019 16.11 e così via.

A partire da Visual Studio 17.1, i pacchetti API di estendibilità di Visual Studio di NuGet corrispondono alla versione di Visual Studio di destinazione delle API. Ad esempio, è consigliabile usare il pacchetto NuGet.VisualStudio e NuGet.VisualStudio.Contracts versione 17.1.0 quando l'estensione è destinata a Visual Studio 17.1 e versioni successive. In Visual Studio 17.0 e versioni precedenti, le versioni del pacchetto NuGet sono identiche alla versione del prodotto NuGet. Ad esempio, se l'estensione è destinata a Visual Studio 2022 versione 17.0, è consigliabile usare la versione 6.0 dei pacchetti di estendibilità di Visual Studio di NuGet.

Sdk client NuGet nelle estensioni di Visual Studio

Nelle estensioni di Visual Studio sono supportate solo le API in NuGet.VisualStudio e NuGet.VisualStudio.Contracts . NuGet fornisce reindirizzamenti di binding per questi assembly, quindi questi assembly non devono essere inclusi nell'estensione.

L'uso di pacchetti SDK client NuGet, ad esempio NuGet.Protocol, non è supportato nelle estensioni di Visual Studio. NuGet non fornisce reindirizzamenti di associazione per questi assembly. Per altre informazioni, vedere i criteri di supporto di NuGet Client SDK.

Elenco servizi

Servizi negoziati

Questi servizi sono disponibili nel pacchetto NuGet.VisualStudio.Contracts.

INuGetProjectService: metodi per interagire con un progetto. (5.7+)

Servizi MEF

Da NuGet 6.0, tutte queste API sono disponibili nel pacchetto NuGet.VisualStudio. In NuGet 5.11 e versioni precedenti, le API nello spazio dei nomi NuGet.VisualStudio sono disponibili nel pacchetto NuGet.VisualStudio e le API nello spazio dei nomi NuGet.SolutionRestoreManager sono disponibili nel pacchetto NuGet.SolutionRestoreManager.Interop.

NuGet.VisualStudio

IRegistryKey: metodo per recuperare un valore da una sottochiave del Registro di sistema. (3.3+)
IVsCredentialProvider Contiene metodi per ottenere le credenziali per le operazioni NuGet. (4.0+)
IVsFrameworkCompatibility Contiene metodi per individuare i framework e la compatibilità tra i framework. (4.0+)
IVsFrameworkCompatibility2 Contiene metodi per individuare i framework e la compatibilità tra i framework. (4.0+)
IVsFrameworkCompatibility3 Contiene metodi per individuare i framework e la compatibilità tra i framework. (5.8+)
IVsFrameworkParser Interfaccia per gestire la conversione tra stringhe e FrameworkName (4.0+)
IVsFrameworkParser2 Interfaccia per analizzare le stringhe di .NET Framework. Vedere NuGet-IVsFrameworkParser. (5.8+)
IVsGlobalPackagesInitScriptExecutor Eseguire script di PowerShell da pacchetti in una soluzione (4.0+)
IVsPackageInstaller: metodi per installare pacchetti NuGet in progetti. (3.3+)
'IVsPackageInstaller2 Contains metodo per installare la versione più recente di un singolo pacchetto in un progetto all'interno della soluzione corrente.
IVsPackageInstallerEvents: eventi per l'installazione o disinstallazione di pacchetti. (3.3+)
IVsPackageInstallerProjectEvents: eventi batch per l'installazione o disinstallazione di pacchetti. (3.3+)
IVsPackageInstallerServices: metodi per recuperare i pacchetti installati nella soluzione corrente e per verificare se un determinato pacchetto è installato in un progetto. (3.3+)
IVsPackageManagerProvider: metodi per fornire suggerimenti di Gestione pacchetti alternativi per un pacchetto NuGet. (3.3 - 5.11)
IVsPackageRestorer: metodi per ripristinare i pacchetti installati in un progetto. (3.3+)
IVsPackageSourceProvider: metodi per recuperare un elenco di origini di pacchetti NuGet. (3.3+)
IVsPackageUninstaller: metodi per disinstallare pacchetti NuGet da progetti. (3.3+)
IVsPathContext Informazioni sul percorso NuGet specifiche del contesto corrente (ad esempio, contesto del progetto). (4.0+)
IVsPathContext2 Informazioni sul percorso NuGet specifiche del contesto corrente (ad esempio, contesto del progetto). (5.0+)
IVsPathContextProvider Factory per inizializzare le istanze di IVsPathContext . (4.0+)
IVsPathContextProvider2 Factory per inizializzare le istanze di IVsPathContext2 . (5.0+)
IVsProjectJsonToPackageReferenceMigrator Contiene metodi per eseguire la migrazione di un progetto legacy basato su project.json al progetto basato su PackageReference. (4.3+)
IVsSemanticVersionComparer Interfaccia per confrontare due stringhe di versione opache trattandole come semantica NuGet (4.0+)
IVsNuGetProjectUpdateEvents (6.2+)

NuGet.SolutionRestoreManager

Queste interfacce sono progettate per consentire ai sistemi di progetto di interagire con NuGet, consentendo al sistema di progetto di notificare a NuGet le modifiche apportate a PackageReferences e orchestrare gli aggiornamenti batch. Le estensioni di Visual Studio che non sono sistemi di progetto probabilmente non trarranno vantaggio da queste API.

IVsSolutionRestoreService (4.0+)
IVsSolutionRestoreService2 (4.3+)
IVsSolutionRestoreService3 (5.1+)
IVsSolutionRestoreService4 (6.0+)
IVsSolutionRestoreStatusProvider (6.0+)

Uso dei servizi NuGet

Avviso

Non usare altri tipi oltre alle interfacce pubbliche nel codice e non fare riferimento ad altri assembly NuGet, ad esempio NuGet.Protocol.dll, NuGet.Frameworks.dlle così via.

Per ottimizzare le promesse di compatibilità con le versioni precedenti apportate, ma offrendo anche la flessibilità necessaria per implementare nuove funzionalità, miglioramenti delle prestazioni e correzioni di bug in Visual Studio, non è supportato l'SDK del client NuGet usato in Visual Studio e non vengono forniti reindirizzamenti di binding in assembly devenv.exe.config diversi dai contratti di estendibilità di Visual Studio.

Se si vuole una nuova API correlata a NuGet in Visual Studio, cercare il repository Home di NuGet e richiamare eventuali problemi esistenti se ne viene trovata una simile. Se non è possibile trovare una richiesta di funzionalità esistente da richiamare, crearne una.

Servizi negoziati

Installare il NuGet.VisualStudio.Contracts pacchetto nel progetto, nonché Microsoft.VisualStudio.SDK.

IAsyncServiceProvider Usare per ottenere Service Broker di Visual Studio e usarlo per ottenere il servizio NuGet. Si noti che AsyncPackage estende IVsAsyncServiceProvider2, in modo che la classe che implementi AsyncPackage possa essere usata come IAsyncServiceProvider. Vedere anche la documentazione su IBrokeredServiceContainer e IServiceBroker

// Your AsyncPackage implements IAsyncServiceProvider
IAsyncServiceProvider asyncServiceProvider = this;
var brokeredServiceContainer = await asyncServiceProvider.GetServiceAsync<SVsBrokeredServiceContainer, IBrokeredServiceContainer>();
var serviceBroker = brokeredServiceContainer.GetFullAccessServiceBroker();
var nugetProjectService = await serviceBroker.GetProxyAsync<INuGetProjectService>(NuGetServices.NuGetProjectServiceV1);

Quando il codice non richiede più il servizio brokerato di NuGet, eliminarlo. Ad esempio, se è necessario solo il servizio brokerato di NuGet durante una singola chiamata al metodo, è possibile eseguire il wrapping in un'istruzione C#using :
```
InstalledPackagesResult installedPackagesResult;
using (nugetProjectService as IDisposable)
{
    installedPackagesResult = await nugetProjectService.GetInstalledPackages(projectGuid, cancellationToken);
}
```

Servizi MEF

Installare il pacchetto NuGet.VisualStudio nel progetto che contiene l'assembly NuGet.VisualStudio.dll.

In NuGet 5.11 e versioni precedenti il pacchetto imposta automaticamente la proprietà Incorpora tipi di interoperabilità del riferimento all'assembly su True. I criteri di Visual Studio 2022 relativi all'incorporamento dei tipi di interoperabilità sono stati modificati, quindi il pacchetto NuGet.VisualStudio versione 6.0.0 e successive non lo usano più.

Per usare un servizio, importarlo tramite l'attributo Import di MEF o tramite il servizio IComponentModel.

//Using the Import attribute
[Import(typeof(IVsPackageInstaller2))]
public IVsPackageInstaller2 packageInstaller;
packageInstaller.InstallLatestPackage(null, currentProject,
    "Newtonsoft.Json", false, false);

//Using the IComponentModel service
var componentModel = (IComponentModel)GetService(typeof(SComponentModel));
IVsPackageInstallerServices installerServices =
    componentModel.GetService<IVsPackageInstallerServices>();

var installedPackages = installerServices.GetInstalledPackages();

Per riferimento, il codice sorgente per NuGet.VisualStudio è contenuto all'interno del repository NuGet.Clients.

Informazioni sui sistemi di progetto .NET

Quando sono stati aggiunti progetti di stile SDK per .NET Core 1.0, è stato progettato per essere più asincrono rispetto ai sistemi di progetto di Visual Studio precedenti. Questo ha un impatto sul modo in cui tutti gli altri componenti di Visual Studio interagiscono direttamente con esso o anche se altri componenti, ad esempio NuGet. Questo aspetto è più evidente sul carico della soluzione e sul caricamento dei progetti, in cui i progetti non sono completamente disponibili dopo che le notifiche sincrone dell'API sincrone precedenti di Visual Studio sono già state attivate.

Durante il caricamento della soluzione, NuGet ignora IVsSolutionEvents.OnAfterProjectLoad, per evitare di ritardare la parte sincrona del caricamento della soluzione. NuGet sincronizzerà le strutture di dati interne dopo il completamento della parte sincrona del caricamento della soluzione. Questo vale anche per i progetti di tipo non SDK.

Anche dopo il completamento di tutti i IVsSolutionEvents.OnAfterSolutionLoad gestori eventi, segnala solo la fine della parte sincrona del caricamento della soluzione. La parte asincrona del caricamento della soluzione è ancora in corso. Pertanto, se l'estensione chiama API NuGet come GetInstalledPackagesAsync o InstallPackage poco dopo il caricamento del progetto o della soluzione, NuGet potrebbe generare un InvalidOperationException messaggio simile a "L'operazione non è riuscita come dettagli per il progetto {nome progetto} non è stato possibile caricare.".

Quando una soluzione contiene almeno un progetto di stile SDK, NuGet eseguirà automaticamente un ripristino dopo il caricamento della soluzione e non è necessario chiamare alcuna API NuGet fino al completamento. È possibile usare IVsNuGetProjectUpdateEvents per ricevere una notifica quando la soluzione viene ripristinata o quando viene ripristinato un progetto specifico, completare. Se una soluzione non contiene progetti di stile SDK, il ripristino non verrà pianificato automaticamente e potrebbe non verificarsi fino a quando non viene pianificata una compilazione.

Per determinare se un progetto usa il flusso asincrono di NuGet (progetto di stile SDK), usare PackageUtilities.IsCapabilityMatch con l'espressione CPS + PackageReference.

Interfaccia INuGetProjectService

    /// <summary>Service to interact with projects in a solution</summary>
    /// <remarks>This interface should not be implemented. New methods may be added over time.</remarks>
    public interface INuGetProjectService
    {
        /// <Summary>Gets the list of packages installed in a project.</Summary>
        /// <param name="projectId">Project ID (GUID).</param>
        /// <param name="cancellationToken">Cancellation token.</param>
        /// <returns>The list of packages in the project.</returns>
        Task<InstalledPackagesResult> GetInstalledPackagesAsync(Guid projectId, CancellationToken cancellationToken);
    }

Interfaccia IRegistryKey

/// <summary>
/// Specifies methods for manipulating a key in the Windows registry.
/// </summary>
public interface IRegistryKey
    {
    /// <summary>
    /// Retrieves the specified subkey for read or read/write access.
    /// </summary>
    /// <param name="name">The name or path of the subkey to create or open.</param>
    /// <returns>The subkey requested, or null if the operation failed.</returns>
    IRegistryKey OpenSubKey(string name);


    /// <summary>
    /// Retrieves the value associated with the specified name.
    /// </summary>
    /// <param name="name">The name of the value to retrieve. This string is not case-sensitive.</param>
    /// <returns>The value associated with name, or null if name is not found.</returns>
    object GetValue(string name);


    /// <summary>
    /// Closes the key and flushes it to disk if its contents have been modified.
    /// </summary>
    void Close();
}

Interfaccia IVsCredentialProvider

    /// <summary>
    /// Contains methods to get credentials for NuGet operations.
    /// </summary>
    public interface IVsCredentialProvider
    {
        /// <summary>
        /// Get credentials for the supplied package source Uri.
        /// </summary>
        /// <param name="uri">The NuGet package source Uri for which credentials are being requested. Implementors are
        /// expected to first determine if this is a package source for which they can supply credentials.
        /// If not, then Null should be returned.</param>
        /// <param name="proxy">Web proxy to use when comunicating on the network.  Null if there is no proxy
        /// authentication configured.</param>
        /// <param name="isProxyRequest">True if if this request is to get proxy authentication
        /// credentials. If the implementation is not valid for acquiring proxy credentials, then
        /// null should be returned.</param>
        /// <param name="isRetry">True if credentials were previously acquired for this uri, but
        /// the supplied credentials did not allow authorized access.</param>
        /// <param name="nonInteractive">If true, then interactive prompts must not be allowed.</param>
        /// <param name="cancellationToken">This cancellation token should be checked to determine if the
        /// operation requesting credentials has been cancelled.</param>
        /// <returns>Credentials acquired by this provider for the given package source uri.
        /// If the provider does not handle requests for the input parameter set, then null should be returned.
        /// If the provider does handle the request, but cannot supply credentials, an exception should be thrown.</returns>
        Task<ICredentials> GetCredentialsAsync(Uri uri,
            IWebProxy proxy,
            bool isProxyRequest,
            bool isRetry,
            bool nonInteractive,
            CancellationToken cancellationToken);
    }

Interfaccia IVsFrameworkCompatibility

    /// <summary>
    /// Contains methods to discover frameworks and compatibility between frameworks.
    /// </summary>
    public interface IVsFrameworkCompatibility
    {
        /// <summary>
        /// Gets all .NETStandard frameworks currently supported, in ascending order by version.
        /// </summary>
        /// <remarks>This API is <a href="https://github.com/microsoft/vs-threading/blob/main/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded.</a></remarks>
        IEnumerable<FrameworkName> GetNetStandardFrameworks();

        /// <summary>
        /// Gets frameworks that support packages of the provided .NETStandard version.
        /// </summary>
        /// <remarks>
        /// The result list is not exhaustive as it is meant to human-readable. For example,
        /// equivalent frameworks are not returned. Additionally, a framework name with version X
        /// in the result implies that framework names with versions greater than or equal to X
        /// but having the same <see cref="FrameworkName.Identifier"/> are also supported.
        ///
        /// <para>This API is <a href="https://github.com/microsoft/vs-threading/blob/main/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded.</a></para>
        /// </remarks>
        /// <param name="frameworkName">The .NETStandard version to get supporting frameworks for.</param>
        [Obsolete("This API does not support .NET 5 and higher target frameworks with platforms. Use IVsFrameworkCompatibility3 instead.")]
        IEnumerable<FrameworkName> GetFrameworksSupportingNetStandard(FrameworkName frameworkName);

        /// <summary>
        /// Selects the framework from <paramref name="frameworks"/> that is nearest
        /// to the <paramref name="targetFramework"/>, according to NuGet's framework
        /// compatibility rules. <c>null</c> is returned of none of the frameworks
        /// are compatible.
        /// </summary>
        /// <remarks>This API is <a href="https://github.com/microsoft/vs-threading/blob/main/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded.</a></remarks>
        /// <param name="targetFramework">The target framework.</param>
        /// <param name="frameworks">The list of frameworks to choose from.</param>
        /// <exception cref="ArgumentException">If any of the arguments are <c>null</c>.</exception>
        /// <returns>The nearest framework.</returns>
        [Obsolete("This API does not support .NET 5 and higher target frameworks with platforms. Use IVsFrameworkCompatibility3 instead.")]
        FrameworkName GetNearest(FrameworkName targetFramework, IEnumerable<FrameworkName> frameworks);
    }

Interfaccia IVsFrameworkCompatibility2

    /// <summary>
    /// Contains methods to discover frameworks and compatibility between frameworks.
    /// </summary>
    [Obsolete("This API does not support .NET 5 and higher target frameworks with platforms. Use IVsFrameworkCompatibility3 instead.")]
    public interface IVsFrameworkCompatibility2 : IVsFrameworkCompatibility
    {
        /// <summary>
        /// Selects the framework from <paramref name="frameworks"/> that is nearest
        /// to the <paramref name="targetFramework"/>, according to NuGet's framework
        /// compatibility rules. <c>null</c> is returned of none of the frameworks
        /// are compatible.
        /// </summary>
        /// <remarks>This API is <a href="https://github.com/microsoft/vs-threading/blob/main/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded.</a></remarks>
        /// <param name="targetFramework">The target framework.</param>
        /// <param name="fallbackTargetFrameworks">
        /// Target frameworks to use if the provided <paramref name="targetFramework"/> is not compatible.
        /// These fallback frameworks are attempted in sequence after <paramref name="targetFramework"/>.
        /// </param>
        /// <param name="frameworks">The list of frameworks to choose from.</param>
        /// <exception cref="ArgumentException">If any of the arguments are <c>null</c>.</exception>
        /// <returns>The nearest framework.</returns>
        [Obsolete("This API does not support .NET 5 and higher target frameworks with platforms. Use IVsFrameworkCompatibility3 instead.")]
        FrameworkName GetNearest(
            FrameworkName targetFramework,
            IEnumerable<FrameworkName> fallbackTargetFrameworks,
            IEnumerable<FrameworkName> frameworks);
    }

Interfaccia IVsFrameworkCompatibility3

    /// <summary>
    /// Contains methods to discover frameworks and compatibility between frameworks.
    /// </summary>
    public interface IVsFrameworkCompatibility3
    {
        /// <summary>
        /// Selects the framework from <paramref name="frameworks"/> that is nearest
        /// to the <paramref name="targetFramework"/>, according to NuGet's framework
        /// compatibility rules. <c>null</c> is returned of none of the frameworks
        /// are compatible.
        /// </summary>
        /// <param name="targetFramework">The target framework.</param>
        /// <param name="frameworks">The list of frameworks to choose from.</param>
        /// <exception cref="ArgumentNullException">If any of the arguments are null.</exception>
        /// <exception cref="ArgumentException">If any of the frameworks cannot be parsed.</exception>
        /// <returns>The nearest framework.</returns>
        /// <remarks>This API is <a href="https://github.com/microsoft/vs-threading/blob/9f065f155525c4561257e02ad61e66e93e073886/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded</a>.</remarks>
        IVsNuGetFramework GetNearest(IVsNuGetFramework targetFramework, IEnumerable<IVsNuGetFramework> frameworks);

        /// <summary>
        /// Selects the framework from <paramref name="frameworks"/> that is nearest
        /// to the <paramref name="targetFramework"/>, according to NuGet's framework
        /// compatibility rules. <c>null</c> is returned of none of the frameworks
        /// are compatible.
        /// </summary>
        /// <param name="targetFramework">The target framework.</param>
        /// <param name="fallbackTargetFrameworks">
        /// Target frameworks to use if the provided <paramref name="targetFramework"/> is not compatible.
        /// These fallback frameworks are attempted in sequence after <paramref name="targetFramework"/>.
        /// </param>
        /// <param name="frameworks">The list of frameworks to choose from.</param>
        /// <exception cref="ArgumentNullException">If any of the arguments are null.</exception>
        /// <exception cref="ArgumentException">If any of the frameworkscannot be parsed.</exception>
        /// <returns>The nearest framework.</returns>
        /// <remarks>This API is <a href="https://github.com/microsoft/vs-threading/blob/9f065f155525c4561257e02ad61e66e93e073886/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded</a>.</remarks>
        IVsNuGetFramework GetNearest(
            IVsNuGetFramework targetFramework,
            IEnumerable<IVsNuGetFramework> fallbackTargetFrameworks,
            IEnumerable<IVsNuGetFramework> frameworks);
    }

Interfaccia IVsFrameworkParser

    /// <summary>
    /// An interface for dealing with the conversion between strings and <see cref="FrameworkName"/>
    /// instances.
    /// </summary>
    [Obsolete("This API does not support .NET 5 and higher target frameworks with platforms. Use IVsFrameworkParser2 instead.")]
    public interface IVsFrameworkParser
    {
        /// <summary>
        /// Parses a short framework name (e.g. "net45") or a full framework name
        /// (e.g. ".NETFramework,Version=v4.5") into a <see cref="FrameworkName"/>
        /// instance.
        /// </summary>
        /// <remarks>This API is <a href="https://github.com/microsoft/vs-threading/blob/main/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded.</a></remarks>
        /// <param name="shortOrFullName">The framework string.</param>
        /// <exception cref="ArgumentNullException">If the provided string is null.</exception>
        /// <exception cref="ArgumentException">If the provided string cannot be parsed.</exception>
        /// <returns>The parsed framework.</returns>
        [Obsolete("This API does not support .NET 5 and higher target frameworks with platforms. Use IVsFrameworkParser2 instead.")]
        FrameworkName ParseFrameworkName(string shortOrFullName);

        /// <summary>
        /// Gets the shortened version of the framework name from a <see cref="FrameworkName"/>
        /// instance.
        /// </summary>
        /// <remarks>
        /// For example, ".NETFramework,Version=v4.5" is converted to "net45". This is the value
        /// used inside of .nupkg folder structures as well as in project.json files.
        /// <para>This API is <a href="https://github.com/microsoft/vs-threading/blob/main/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded.</a></para>
        /// </remarks>
        /// <param name="frameworkName">The framework name.</param>
        /// <exception cref="ArgumentNullException">If the input is null.</exception>
        /// <exception cref="ArgumentException">
        /// If the provided framework name cannot be converted to a short name.
        /// </exception>
        /// <returns>The short framework name. </returns>
        [Obsolete("This API does not support .NET 5 and higher target frameworks with platforms. Use IVsFrameworkParser2 instead.")]
        string GetShortFrameworkName(FrameworkName frameworkName);
    }

Interfaccia IVsFrameworkParser2

    /// <summary>An interface to parse .NET Framework strings. See <a href="http://aka.ms/NuGet-IVsFrameworkParser">http://aka.ms/NuGet-IVsFrameworkParser</a>.</summary>
    public interface IVsFrameworkParser2
    {
        /// <summary>
        /// Parses a short framework name (e.g. "net45") or a full Target Framework Moniker
        /// (e.g. ".NETFramework,Version=v4.5") into a <see cref="IVsNuGetFramework"/>
        /// instance.
        /// </summary>
        /// <param name="input">The framework string</param>
        /// <param name="nuGetFramework">The resulting <see cref="IVsNuGetFramework"/>. If the method returns false, this return NuGet's "Unsupported" framework details.</param>
        /// <returns>A boolean to specify whether the input could be parsed into a valid <see cref="IVsNuGetFramework"/> object.</returns>
        /// <remarks>This API is not needed to get framework information about loaded projects, and should not be used to parse the project's TargetFramework property. See <a href="http://aka.ms/NuGet-IVsFrameworkParser">http://aka.ms/NuGet-IVsFrameworkParser</a>.<br/>
        /// This API is <a href="https://github.com/microsoft/vs-threading/blob/9f065f155525c4561257e02ad61e66e93e073886/doc/cookbook_vs.md#how-do-i-effectively-verify-that-my-code-is-fully-free-threaded">free-threaded</a>.</remarks>
        bool TryParse(string input, out IVsNuGetFramework nuGetFramework);
    }

Interfaccia IVsGlobalPackagesInitScriptExecutor

    /// <summary>
    /// Execute powershell scripts from package(s) in a solution
    /// </summary>
    /// <remarks>Intended for internal use only.</remarks>
    public interface IVsGlobalPackagesInitScriptExecutor
    {
        /// <summary>
        /// Executes the init script of the given package if available.
        /// 1) If the init.ps1 script has already been executed by the powershell host, it will not be executed again.
        /// True is returned.
        /// 2) If the package is found in the global packages folder it will be used.
        /// If not, it will return false and do nothing.
        /// 3) Also, note if other scripts are executing while this call was made, it will wait for them to complete.
        /// </summary>
        /// <param name="packageId">Id of the package whose init.ps1 will be executed.</param>
        /// <param name="packageVersion">Version of the package whose init.ps1 will be executed.</param>
        /// <returns>Returns true if the script was executed or has been executed already.</returns>
        /// <remarks>This method throws if the init.ps1 being executed throws.</remarks>
        Task<bool> ExecuteInitScriptAsync(string packageId, string packageVersion);
    }

Interfaccia IVsPackageInstaller

    /// <summary>
    /// Contains methods to install packages into a project within the current solution.
    /// </summary>
    [ComImport]
    [Guid("4F3B122B-A53B-432C-8D85-0FAFB8BE4FF4")]
    public interface IVsPackageInstaller
    {
        /// <summary>
        /// Installs a single package from the specified package source.
        /// </summary>
        /// <remarks>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></remarks>
        /// <param name="source">
        /// The package source to install the package from. This value can be <c>null</c>
        /// to indicate that the user's configured sources should be used. Otherwise,
        /// this should be the source path as a string. If the user has credentials
        /// configured for a source, this value must exactly match the configured source
        /// value.
        /// </param>
        /// <param name="project">The target project for package installation.</param>
        /// <param name="packageId">The package ID of the package to install.</param>
        /// <param name="version">
        /// The version of the package to install. <c>null</c> can be provided to
        /// install the latest version of the package.
        /// </param>
        /// <param name="ignoreDependencies">
        /// A boolean indicating whether or not to ignore the package's dependencies
        /// during installation.
        /// </param>
        [Obsolete("System.Version does not support SemVer pre-release versions. Use the overload with string version instead.")]
        void InstallPackage(string source, Project project, string packageId, Version version, bool ignoreDependencies);

        /// <summary>
        /// Installs a single package from the specified package source.
        /// </summary>
        /// <remarks>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></remarks>
        /// <param name="source">
        /// The package source to install the package from. This value can be <c>null</c>
        /// to indicate that the user's configured sources should be used. Otherwise,
        /// this should be the source path as a string. If the user has credentials
        /// configured for a source, this value must exactly match the configured source
        /// value.
        /// </param>
        /// <param name="project">The target project for package installation.</param>
        /// <param name="packageId">The package ID of the package to install.</param>
        /// <param name="version">
        /// The version of the package to install. <c>null</c> can be provided to
        /// install the latest version of the package.
        /// </param>
        /// <param name="ignoreDependencies">
        /// A boolean indicating whether or not to ignore the package's dependencies
        /// during installation.
        /// </param>
        void InstallPackage(string source, Project project, string packageId, string version, bool ignoreDependencies);

        /// <summary>
        /// Installs a single package from the specified package source.
        /// </summary>
        /// <param name="repository">The package repository to install the package from.</param>
        /// <param name="project">The target project for package installation.</param>
        /// <param name="packageId">The package id of the package to install.</param>
        /// <param name="version">
        /// The version of the package to install. <c>null</c> can be provided to
        /// install the latest version of the package.
        /// </param>
        /// <param name="ignoreDependencies">
        /// A boolean indicating whether or not to ignore the package's dependencies
        /// during installation.
        /// </param>
        /// <param name="skipAssemblyReferences">
        /// A boolean indicating if assembly references from the package should be
        /// skipped.
        /// </param>
        [Obsolete]
        void InstallPackage(IPackageRepository repository, Project project, string packageId, string version, bool ignoreDependencies, bool skipAssemblyReferences);

        /// <summary>
        /// Installs one or more packages that exist on disk in a folder defined in the registry.
        /// </summary>
        /// <param name="keyName">
        /// The registry key name (under NuGet's repository key) that defines the folder on disk
        /// containing the packages.
        /// </param>
        /// <param name="isPreUnzipped">
        /// A boolean indicating whether the folder contains packages that are
        /// pre-unzipped.
        /// </param>
        /// <param name="skipAssemblyReferences">
        /// A boolean indicating whether the assembly references from the packages
        /// should be skipped.
        /// </param>
        /// <param name="project">The target project for package installation.</param>
        /// <param name="packageVersions">
        /// A dictionary of packages/versions to install where the key is the package id
        /// and the value is the version.
        /// </param>
        /// <remarks>
        /// If any version of the package is already installed, no action will be taken.
        /// <para>
        /// Dependencies are always ignored.
        /// </para>
        /// <para>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></para>
        /// </remarks>
        void InstallPackagesFromRegistryRepository(string keyName, bool isPreUnzipped, bool skipAssemblyReferences, Project project, IDictionary<string, string> packageVersions);

        /// <summary>
        /// Installs one or more packages that exist on disk in a folder defined in the registry.
        /// </summary>
        /// <param name="keyName">
        /// The registry key name (under NuGet's repository key) that defines the folder on disk
        /// containing the packages.
        /// </param>
        /// <param name="isPreUnzipped">
        /// A boolean indicating whether the folder contains packages that are
        /// pre-unzipped.
        /// </param>
        /// <param name="skipAssemblyReferences">
        /// A boolean indicating whether the assembly references from the packages
        /// should be skipped.
        /// </param>
        /// <param name="ignoreDependencies">A boolean indicating whether the package's dependencies should be ignored</param>
        /// <param name="project">The target project for package installation.</param>
        /// <param name="packageVersions">
        /// A dictionary of packages/versions to install where the key is the package id
        /// and the value is the version.
        /// </param>
        /// <remarks>
        /// If any version of the package is already installed, no action will be taken.
        /// <para>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></para>
        /// </remarks>
        void InstallPackagesFromRegistryRepository(string keyName, bool isPreUnzipped, bool skipAssemblyReferences, bool ignoreDependencies, Project project, IDictionary<string, string> packageVersions);

        /// <summary>
        /// Installs one or more packages that are embedded in a Visual Studio Extension Package.
        /// </summary>
        /// <param name="extensionId">The Id of the Visual Studio Extension Package.</param>
        /// <param name="isPreUnzipped">
        /// A boolean indicating whether the folder contains packages that are
        /// pre-unzipped.
        /// </param>
        /// <param name="skipAssemblyReferences">
        /// A boolean indicating whether the assembly references from the packages
        /// should be skipped.
        /// </param>
        /// <param name="project">The target project for package installation</param>
        /// <param name="packageVersions">
        /// A dictionary of packages/versions to install where the key is the package id
        /// and the value is the version.
        /// </param>
        /// <remarks>
        /// If any version of the package is already installed, no action will be taken.
        /// <para>
        /// Dependencies are always ignored.
        /// </para>
        /// <para>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></para>
        /// </remarks>
        void InstallPackagesFromVSExtensionRepository(string extensionId, bool isPreUnzipped, bool skipAssemblyReferences, Project project, IDictionary<string, string> packageVersions);

        /// <summary>
        /// Installs one or more packages that are embedded in a Visual Studio Extension Package.
        /// </summary>
        /// <param name="extensionId">The Id of the Visual Studio Extension Package.</param>
        /// <param name="isPreUnzipped">
        /// A boolean indicating whether the folder contains packages that are
        /// pre-unzipped.
        /// </param>
        /// <param name="skipAssemblyReferences">
        /// A boolean indicating whether the assembly references from the packages
        /// should be skipped.
        /// </param>
        /// <param name="ignoreDependencies">A boolean indicating whether the package's dependencies should be ignored</param>
        /// <param name="project">The target project for package installation</param>
        /// <param name="packageVersions">
        /// A dictionary of packages/versions to install where the key is the package id
        /// and the value is the version.
        /// </param>
        /// <remarks>
        /// If any version of the package is already installed, no action will be taken.
        /// <para>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></para>
        /// </remarks>
        void InstallPackagesFromVSExtensionRepository(string extensionId, bool isPreUnzipped, bool skipAssemblyReferences, bool ignoreDependencies, Project project, IDictionary<string, string> packageVersions);
    }

Interfaccia IVsPackageinstaller2


    /// <summary>
    /// Contains method to install latest version of a single package into a project within the current solution.
    /// </summary>
    public interface IVsPackageInstaller2 : IVsPackageInstaller
    {
        /// <summary>
        /// Installs the latest version of a single package from the specified package source.
        /// </summary>
        /// <remarks>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></remarks>
        /// <param name="source">
        /// The package source to install the package from. This value can be <c>null</c>
        /// to indicate that the user's configured sources should be used. Otherwise,
        /// this should be the source path as a string. If the user has credentials
        /// configured for a source, this value must exactly match the configured source
        /// value.
        /// </param>
        /// <param name="project">The target project for package installation.</param>
        /// <param name="packageId">The package ID of the package to install.</param>
        /// <param name="includePrerelease">
        /// Whether or not to consider prerelease versions when finding the latest version
        /// to install.
        /// </param>
        /// <param name="ignoreDependencies">
        /// A boolean indicating whether or not to ignore the package's dependencies
        /// during installation.
        /// </param>
        /// <exception cref="InvalidOperationException">
        /// Thrown when <see paramref="includePrerelease"/> is <c>false</c> and no stable version
        /// of the package exists.
        /// </exception>
        void InstallLatestPackage(
            string source,
            Project project,
            string packageId,
            bool includePrerelease,
            bool ignoreDependencies);
    }

Interfaccia IVsPackageInstallerEvents

Nota

Questi eventi vengono generati solo per i progetti packages.config. Per ottenere gli aggiornamenti per l'uso IVsNuGetProjectUpdateEvents di packages.config e PackageReference.

    /// <summary>
    /// Contains events which are raised when packages are installed or uninstalled from projects and the current
    /// solution.
    /// </summary>
    public interface IVsPackageInstallerEvents
    {
        /// <summary>
        /// Raised when a package is about to be installed into the current solution.
        /// </summary>
        event VsPackageEventHandler PackageInstalling;

        /// <summary>
        /// Raised after a package has been installed into the current solution.
        /// </summary>
        event VsPackageEventHandler PackageInstalled;

        /// <summary>
        /// Raised when a package is about to be uninstalled from the current solution.
        /// </summary>
        event VsPackageEventHandler PackageUninstalling;

        /// <summary>
        /// Raised after a package has been uninstalled from the current solution.
        /// </summary>
        event VsPackageEventHandler PackageUninstalled;

        /// <summary>
        /// Raised after a package has been installed into a project within the current solution.
        /// </summary>
        event VsPackageEventHandler PackageReferenceAdded;

        /// <summary>
        /// Raised after a package has been uninstalled from a project within the current solution.
        /// </summary>
        event VsPackageEventHandler PackageReferenceRemoved;
    }

Interfaccia IVsPackageInstallerProjectEvents

Nota

Questi eventi vengono generati solo per i progetti packages.config. Per ottenere gli aggiornamenti per l'uso IVsNuGetProjectUpdateEvents di packages.config e PackageReference.

    /// <summary>
    /// Contains batch events which are raised when packages are installed or uninstalled from projects with packages.config
    /// and the current solution.
    /// </summary>
    public interface IVsPackageInstallerProjectEvents
    {
        /// <summary>
        /// Raised before any IVsPackageInstallerEvents events are raised for a project.
        /// </summary>
        event VsPackageProjectEventHandler BatchStart;

        /// <summary>
        /// Raised after all IVsPackageInstallerEvents events are raised for a project.
        /// </summary>
        event VsPackageProjectEventHandler BatchEnd;

    }

Interfaccia IVsPackageInstallerServices

    /// <summary>
    /// Contains methods to query for installed packages within the current solution.
    /// </summary>
    [Obsolete("Use INuGetProjectService in the NuGet.VisualStudio.Contracts package instead.")]
    public interface IVsPackageInstallerServices
    {
        /// <summary>
        /// Get the list of NuGet packages installed in the current solution.
        /// </summary>
        [Obsolete("This method can cause UI delays if called on the UI thread. Use INuGetProjectService.GetInstalledPackagesAsync in the NuGet.VisualStudio.Contracts package instead, and iterate all projects in the solution")]
        IEnumerable<IVsPackageMetadata> GetInstalledPackages();

        /// <summary>
        /// Checks if a NuGet package with the specified Id is installed in the specified project.
        /// </summary>
        /// <param name="project">The project to check for NuGet package.</param>
        /// <param name="id">The id of the package to check.</param>
        /// <returns><c>true</c> if the package is install. <c>false</c> otherwise.</returns>
        /// <exception cref="InvalidOperationException">A "project not nominated" exception will be thrown if the project system has not yet told NuGet about the project.
        /// You can use <see cref="IVsNuGetProjectUpdateEvents"/> or Microsoft.VisualStudio.OperationProgress to be notified when the project is ready.</exception>
        [Obsolete("This method can cause UI delays if called on the UI thread. Use INuGetProjectService.GetInstalledPackagesAsync in the NuGet.VisualStudio.Contracts package instead, and check the specific package you're interested in")]
        bool IsPackageInstalled(Project project, string id);

        /// <summary>
        /// Checks if a NuGet package with the specified Id and version is installed in the specified project.
        /// </summary>
        /// <param name="project">The project to check for NuGet package.</param>
        /// <param name="id">The id of the package to check.</param>
        /// <param name="version">The version of the package to check.</param>
        /// <returns><c>true</c> if the package is install. <c>false</c> otherwise.</returns>
        /// <exception cref="InvalidOperationException">A "project not nominated" exception will be thrown if the project system has not yet told NuGet about the project.
        /// You can use <see cref="IVsNuGetProjectUpdateEvents"/> or Microsoft.VisualStudio.OperationProgress to be notified when the project is ready.</exception>
        [Obsolete("This method can cause UI delays if called on the UI thread. Use INuGetProjectService.GetInstalledPackagesAsync in the NuGet.VisualStudio.Contracts package instead, and check the specific package you're interested in")]
        bool IsPackageInstalled(Project project, string id, SemanticVersion version);

        /// <summary>
        /// Checks if a NuGet package with the specified Id and version is installed in the specified project.
        /// </summary>
        /// <param name="project">The project to check for NuGet package.</param>
        /// <param name="id">The id of the package to check.</param>
        /// <param name="versionString">The version of the package to check.</param>
        /// <returns><c>true</c> if the package is install. <c>false</c> otherwise.</returns>
        /// <remarks>
        /// The reason this method is named IsPackageInstalledEx, instead of IsPackageInstalled, is that
        /// when client project compiles against this assembly, the compiler would attempt to bind against
        /// the other overload which accepts SemanticVersion and would require client project to reference NuGet.Core.
        /// </remarks>
        /// <exception cref="InvalidOperationException">A "project not nominated" exception will be thrown if the project system has not yet told NuGet about the project.
        /// You can use <see cref="IVsNuGetProjectUpdateEvents"/> or Microsoft.VisualStudio.OperationProgress to be notified when the project is ready.</exception>
        [Obsolete("This method can cause UI delays if called on the UI thread. Use INuGetProjectService.GetInstalledPackagesAsync in the NuGet.VisualStudio.Contracts package instead, and check the specific package you're interested in")]
        bool IsPackageInstalledEx(Project project, string id, string versionString);

        /// <summary>
        /// Get the list of NuGet packages installed in the specified project.
        /// </summary>
        /// <param name="project">The project to get NuGet packages from.</param>
        /// <exception cref="InvalidOperationException">A "project not nominated" exception will be thrown if the project system has not yet told NuGet about the project.
        /// You can use <see cref="IVsNuGetProjectUpdateEvents"/> or Microsoft.VisualStudio.OperationProgress to be notified when the project is ready.</exception>
        [Obsolete("This method can cause UI delays if called on the UI thread. Use INuGetProjectService.GetInstalledPackagesAsync in the NuGet.VisualStudio.Contracts package instead")]
        IEnumerable<IVsPackageMetadata> GetInstalledPackages(Project project);
    }

Interfaccia IVsPackageManagerProvider

Questa interfaccia è stata usata principalmente dal team ASP.NET, per suggerire che i pacchetti Javascript e CSS come jQuery e bootstrap vengono installati con Bower invece di NuGet. Dopo aver rimosso tale funzionalità da Visual Studio, NuGet ha obsoleto questa interfaccia e non verrà più usata dall'interfaccia utente Gestione pacchetti in Visual Studio 2022 (versione 17.0) e versioni successive.

    /// <summary>
    /// Interface allowing integration of alternate package manager suggestion for a NuGet package. 
    /// For example jQuery may appear on Bower and npm,
    /// it might be more appropriate to install a package from them for certain projects. 
    /// </summary>
    [Obsolete]
    public interface IVsPackageManagerProvider
    {
        /// <summary>
        /// Localized display package manager name.
        /// </summary>
        string PackageManagerName { get; }

        /// <summary>
        /// Package manager unique id.
        /// </summary>
        string PackageManagerId { get; }

        /// <summary>
        /// The tool tip description for the package
        /// </summary>
        string Description { get; }

        /// <summary>
        /// Check if a recommendation should be surfaced for an alternate package manager. 
        /// This code should not rely on slow network calls, and should return rapidly.
        /// </summary>
        /// <param name="packageId">Current package id</param>
        /// <param name="projectName">Unique project name for finding the project through VS dte</param>
        /// <param name="token">Cancellation Token</param>
        /// <returns>return true if need to direct to integrated package manager for this package</returns>
        Task<bool> CheckForPackageAsync(string packageId, string projectName, CancellationToken token);

        /// <summary>
        /// This Action should take the user to the other package manager.
        /// </summary>
        /// <param name="packageId">Current package id</param>
        /// <param name="projectName">Unique project name for finding the project through VS dte</param>
        void GoToPackage(string packageId, string projectName);
    }

Interfaccia IVsPackageRestorer


    /// <summary>
    /// Contains methods to restore packages installed in a project within the current solution.
    /// </summary>
    public interface IVsPackageRestorer
    {
        /// <summary>
        /// Returns a value indicating whether the user consent to download NuGet packages
        /// has been granted.
        /// </summary>
        /// <remarks>Can be called from a background thread.</remarks>
        /// <returns>true if the user consent has been granted; otherwise, false.</returns>
        bool IsUserConsentGranted();

        /// <summary>
        /// Restores NuGet packages installed in the given project within the current solution.
        /// </summary>
        /// <remarks>Can be called from a background thread.</remarks>
        /// <param name="project">The project whose NuGet packages to restore.</param>
        void RestorePackages(Project project);
    }

Interfaccia IVsPackageSourceProvider

    /// <summary>
    /// A public API for retrieving the list of NuGet package sources.
    /// </summary>
    public interface IVsPackageSourceProvider
    {
        /// <summary>
        /// Provides the list of package sources.
        /// </summary>
        /// <remarks>Can be called from a background thread.</remarks>
        /// <param name="includeUnOfficial">Unofficial sources will be included in the results</param>
        /// <param name="includeDisabled">Disabled sources will be included in the results</param>
        /// <remarks>Does not require the UI thread.</remarks>
        /// <exception cref="ArgumentException">Thrown if a NuGet configuration file is invalid.</exception>
        /// <exception cref="ArgumentNullException">Thrown if a NuGet configuration file is invalid.</exception>
        /// <exception cref="InvalidOperationException">Thrown if a NuGet configuration file is invalid.</exception>
        /// <exception cref="InvalidDataException">Thrown if a NuGet configuration file is invalid.</exception>
        /// <returns>Key: source name Value: source URI</returns>
        IEnumerable<KeyValuePair<string, string>> GetSources(bool includeUnOfficial, bool includeDisabled);

        /// <summary>
        /// Raised when sources are added, removed, disabled, or modified.
        /// </summary>
        event EventHandler SourcesChanged;
    }

Interfaccia IVsPackageUninstaller

    /// <summary>
    /// Contains methods to uninstall packages from a project within the current solution.
    /// </summary>
    public interface IVsPackageUninstaller
    {
        /// <summary>
        /// Uninstall the specified package from a project and specify whether to uninstall its dependency packages
        /// too.
        /// </summary>
        /// <remarks>Can be called from a background thread, if the UI thread is not blocked waiting for this to finish.
        /// See <a href="https://github.com/nuget/home/issues/11476">https://github.com/nuget/home/issues/11476</a></remarks>
        /// <param name="project">The project from which the package is uninstalled.</param>
        /// <param name="packageId">The package to be uninstalled</param>
        /// <param name="removeDependencies">
        /// A boolean to indicate whether the dependency packages should be
        /// uninstalled too.
        /// </param>
        void UninstallPackage(Project project, string packageId, bool removeDependencies);
    }

Interfaccia IVsPathContext

    /// <summary>
    /// NuGet path information specific to the current context (e.g. project context).
    /// Represents captured snapshot associated with current project/solution settings.
    /// Should be discarded immediately after all queries are done.
    /// </summary>
    public interface IVsPathContext
    {
        /// <summary>
        /// User package folder directory. The path returned is an absolute path.
        /// </summary>
        string UserPackageFolder { get; }

        /// <summary>
        /// Fallback package folder locations. The paths (if any) in the returned list are absolute paths. If no
        /// fallback package folders are configured, an empty list is returned. The item type of this sequence is
        /// <see cref="string"/>.
        /// </summary>
        /// <remarks>Can be called from a background thread.</remarks>
        IEnumerable FallbackPackageFolders { get; }

        /// <summary>
        /// Fetch a package directory containing the provided asset path.
        /// </summary>
        /// <param name="packageAssetPath">Absolute path to package asset file.</param>
        /// <param name="packageDirectoryPath">Full path to a package directory. 
        /// <code>null</code> if returned falue is <code>false</code>.</param>
        /// <returns>
        /// <code>true</code> when a package containing the given file was found, <code>false</code> - otherwise.
        /// </returns>
        /// <example>
        /// Suppose the project is a packages.config project and the following asset paths are provided:
        /// 
        /// - C:\src\MyProject\packages\NuGet.Versioning.3.5.0-rc1-final\lib\net45\NuGet.Versioning.dll
        /// - C:\path\to\non\package\assembly\Newtonsoft.Json.dll
        /// - C:\src\MyOtherProject\packages\NuGet.Core.2.12.0\lib\net40\NuGet.Core.dll
        /// - C:\src\MyProject\packages\Autofac.3.5.2\lib\net40\Autofac.dll
        /// - C:\src\MyProject\packages\Autofac.3.5.2\lib\net40\Autofac.Fake.dll
        /// 
        /// The result will be:
        /// 
        /// - C:\src\MyProject\packages\NuGet.Versioning.3.5.0-rc1-final
        /// - null
        /// - null
        /// - C:\src\MyProject\packages\Autofac.3.5.2
        /// - C:\src\MyProject\packages\Autofac.3.5.2
        /// </example>
        bool TryResolvePackageAsset(string packageAssetPath, out string packageDirectoryPath);
    }

Interfaccia IVsPathContext2

    /// <summary>
    /// NuGet path information specific to the current context (e.g. project context) or solution context
    /// Represents captured snapshot associated with current project/solution settings.
    /// Should be discarded immediately after all queries are done.
    /// </summary>
    public interface IVsPathContext2 : IVsPathContext
    {
        /// <summary>
        /// Solution packages folder directory. This will always be set irrespective if folder actually exists or not.
        /// The path returned is an absolute path.
        /// </summary>
        string SolutionPackageFolder { get; }
    }

Interfaccia IVsPathContextProvider

    /// <summary>
    /// A factory to initialize <see cref="IVsPathContext"/> instances.
    /// </summary>
    public interface IVsPathContextProvider
    {
        /// <summary>
        /// Attempts to create an instance of <see cref="IVsPathContext"/>.
        /// </summary>
        /// <remarks>Can be called from a background thread.</remarks>
        /// <param name="projectUniqueName">
        /// Unique identificator of the project. Should be a full path to project file.
        /// </param>
        /// <param name="context">The path context associated with given project.</param>
        /// <returns>
        /// <code>True</code> if operation has succeeded and context was created.
        /// False, otherwise, e.g. when provided project is not managed by NuGet.
        /// </returns>
        /// <throws>
        /// <code>ArgumentNullException</code> if projectUniqueName is passed as null.
        /// <code>InvalidOperationException</code> when it fails to create a context and return appropriate error message.
        /// </throws>
        bool TryCreateContext(string projectUniqueName, out IVsPathContext context);
    }

Interfaccia IVsPathContextProvider2

    /// <summary>
    /// A factory to initialize <see cref="IVsPathContext2"/> instances.
    /// </summary>
    public interface IVsPathContextProvider2 : IVsPathContextProvider
    {
        /// <summary>
        /// Attempts to create an instance of <see cref="IVsPathContext2"/> for the solution.
        /// </summary>
        /// <remarks>This API is free-threaded, but APIs on the returned IVsPathContext2 may not be.</remarks>
        /// <param name="context">The path context associated with this solution.</param>
        /// <returns>
        /// <code>True</code> if operation has succeeded and context was created.
        /// <code>False</code> otherwise.
        /// </returns>
        /// <throws>
        /// <code>InvalidOperationException</code> when it fails to create a context and return appropriate error message.
        /// </throws>
        bool TryCreateSolutionContext(out IVsPathContext2 context);

        /// <summary>
        /// Attempts to create an instance of <see cref="IVsPathContext2"/> for the solution.
        /// </summary>
        /// <remarks>This API is free-threaded, but APIs on the returned IVsPathContext2 may not be.</remarks>
        /// <param name="solutionDirectory">
        /// path to the solution directory. Must be an absolute path.
        /// It will be performant to pass the solution directory if it's available.
        /// </param>
        /// <param name="context">The path context associated with this solution.</param>
        /// <returns>
        /// <code>True</code> if operation has succeeded and context was created.
        /// <code>False</code> otherwise.
        /// </returns>
        /// <throws>
        /// <code>ArgumentNullException</code> if solutionDirectory is passed as null.
        /// <code>InvalidOperationException</code> when it fails to create a context and return appropriate error message.
        /// </throws>
        bool TryCreateSolutionContext(string solutionDirectory, out IVsPathContext2 context);

        /// <summary>
        /// Attempts to create an instance of <see cref="IVsPathContext"/> containing only the user wide and machine wide configurations.
        /// If a solution is loaded, note that the values in the path context might not be the actual effective values for the solution.
        /// If a customer has overriden the `globalPackagesFolder` key or cleared the `fallbackPackageFolders`, these values will be incorrect.
        /// It is important to keep this scenario in mind when working with this path. To predict differences you can call this in combination with <see cref="TryCreateSolutionContext(out IVsPathContext2)"/>.
        /// </summary>
        /// <returns>
        /// <code>True</code> if operation has succeeded and context was created.
        /// <code>False</code> otherwise.
        /// </returns>
        /// <remarks>
        /// This method can be safely invoked from a background thread. Do note that this method might switch to the UI thread internally, so be mindful of blocking the UI thread on this.
        /// </remarks>
        bool TryCreateNoSolutionContext(out IVsPathContext vsPathContext);
    }

Interfaccia IVsProjectJsonToPackageReferenceMigrator

    /// <summary>
    /// Contains methods to migrate a project.json based legacy project to PackageReference based project.
    /// </summary>
    public interface IVsProjectJsonToPackageReferenceMigrator
    {
        /// <summary>
        /// Migrates a legacy Project.json based project to Package Reference based project. The result 
        /// should be casted to type <see cref="IVsProjectJsonToPackageReferenceMigrateResult"/>
        /// The backup of the original project file and project.json file is created in the Backup folder
        /// in the root of the project directory.
        /// </summary>
        /// <param name="projectUniqueName">The full path to the project that needs to be migrated</param>
        Task<object> MigrateProjectJsonToPackageReferenceAsync(string projectUniqueName);

    }

Interfaccia IVsSemanticVersionComparer

    /// <summary>
    /// An interface for comparing two opaque version strings by treating them as NuGet semantic
    /// versions.
    /// </summary>
    public interface IVsSemanticVersionComparer
    {
        /// <summary>
        /// Compares two version strings as if they were NuGet semantic version
        /// strings. Returns a number less than zero if <paramref name="versionA"/>
        /// is less than <paramref name="versionB"/>. Returns zero if the two versions 
        /// are equivalent. Returns a number greater than zero if <paramref name="versionA"/>
        /// is greater than <paramref name="versionB"/>.
        /// </summary>
        /// <remarks>This API is free-threaded.</remarks>
        /// <param name="versionA">The first version string.</param>
        /// <param name="versionB">The second version string.</param>
        /// <exception cref="ArgumentNullException">If either version string is null.</exception>
        /// <exception cref="ArgumentException">If either string cannot be parsed.</exception>
        /// <returns>
        /// A standard comparison integer based on the relationship between the
        /// two provided versions.
        /// </returns>
        int Compare(string versionA, string versionB);
    }

Interfaccia IVsNuGetProjectUpdateEvents

    /// <summary>
    /// NuGet project update events.
    /// This API provides means of tracking project updates by NuGet.
    /// In particular, for PackageReference projects, updates to the assets file and nuget generated props/targets.
    /// For packages.config projects, package installations will be tracked.
    /// All events are fired from a threadpool thread.
    /// </summary>
    public interface IVsNuGetProjectUpdateEvents
    {
        /// <summary>
        /// Raised when solution restore starts with the list of projects that will be restored.
        /// The list will not include all projects. Some projects may have been skipped in earlier up to date check, and other projects may no-op.
        /// </summary>
        /// <remarks>
        /// Just because a project is being restored that doesn't necessarily mean any actual updates will happen.
        /// No heavy computation should happen in any of these methods as it'll block the NuGet progress.
        /// </remarks>
        event SolutionRestoreEventHandler SolutionRestoreStarted;

        /// <summary>
        /// Raised when solution restore finishes with the list of projects that were restored.
        /// The list will not include all projects. Some projects may have been skipped in earlier up to date check, and other projects may no-op.
        /// </summary>
        /// <remarks>
        /// Just because a project is being restored that doesn't necessarily mean any actual updates will happen.
        /// No heavy computation should happen in any of these methods as it'll block the NuGet progress.
        /// </remarks>
        event SolutionRestoreEventHandler SolutionRestoreFinished;

        /// <summary>
        /// Raised when particular project is about to be updated.
        /// For PackageReference projects, this means an assets file or a nuget temp msbuild file write (nuget.g.props or nuget.g.targets). The list of updated files will include the aforementioned.
        /// If a project was restored, but no file updates happen, this event will not be fired.
        /// For packages.config projects, this means that the project file was changed.
        /// </summary>
        /// <remarks>
        /// No heavy computation should happen in any of these methods as it'll block the NuGet progress.
        /// </remarks>
        event ProjectUpdateEventHandler ProjectUpdateStarted;

        /// <summary>
        /// Raised when particular project update has been completed.
        /// For PackageReference projects, this means an assets file or a nuget temp msbuild file write (nuget.g.props or nuget.g.targets). The list of updated files will include the aforementioned.
        /// If a project was restored, but no file updates happen, this event will not be fired.
        /// For packages.config projects, this means that the project file was changed.
        /// </summary>
        /// <remarks>
        /// No heavy computation should happen in any of these methods as it'll block the NuGet progress.
        /// </remarks>
        event ProjectUpdateEventHandler ProjectUpdateFinished;
    }

    /// <summary>
    /// Defines an event handler delegate for solution restore start and end.
    /// </summary>
    /// <param name="projects">List of projects that will run restore. Never <see langword="null"/>.</param>
    public delegate void SolutionRestoreEventHandler(IReadOnlyList<string> projects);

    /// <summary>
    /// Defines an event handler delegate for project updates.
    /// </summary>
    /// <param name="projectUniqueName">Project full path. Never <see langword="null"/>. </param>
    /// <param name="updatedFiles">NuGet output files that may be updated. Never <see langword="null"/>.</param>
    public delegate void ProjectUpdateEventHandler(string projectUniqueName, IReadOnlyList<string> updatedFiles);
}

Interfaccia IVsSolutionRestoreService

    /// <summary>
    /// Represents a package restore service API for integration with a project system.
    /// </summary>
    public interface IVsSolutionRestoreService
    {
        /// <summary>
        /// A task providing last/current restore operation status.
        /// Could be null if restore has not started yet.
        /// </summary>
        /// <remarks>
        /// This task is a reflection of the current state of the current-restore-operation or
        /// recently-completed-restore. The usage of this property will be to continue,
        /// e.g. to build solution or something) on completion of this task.
        /// Also, on completion, if the task returns false then it means the restore failed and
        /// the build task will be terminated.
        /// </remarks>
        Task<bool> CurrentRestoreOperation { get; }

        /// <summary>
        /// An entry point used by CPS to indicate given project needs to be restored.
        /// </summary>
        /// <param name="projectUniqueName">
        /// Unique identifier of the project. Should be a full path to project file.
        /// </param>
        /// <param name="projectRestoreInfo">Metadata <see cref="IVsProjectRestoreInfo"/> needed for restoring the project.</param>
        /// <param name="token">Cancellation token.</param>
        /// <returns>
        /// Returns a restore task corresponding to the nominated project request.
        /// NuGet will batch restore requests so it's possible the same restore task will be returned for multiple projects.
        /// When the requested restore operation for the given project completes the task will indicate operation success or failure.
        /// </returns>
        /// <exception cref="ArgumentException">Thrown if <paramref name="projectUniqueName" /> is not the path of a project file.</exception>
        /// <exception cref="ArgumentNullException">Thrown if <paramref name="projectRestoreInfo" /> is <c>null</c>.</exception>
        /// <exception cref="OperationCanceledException">Thrown if <paramref name="token" /> is cancelled.</exception>
        Task<bool> NominateProjectAsync(string projectUniqueName, IVsProjectRestoreInfo projectRestoreInfo, CancellationToken token);
    }

Interfaccia IVsSolutionRestoreService2

    /// <summary>
    /// Represents a package restore service API for integration with a project system.
    /// </summary>
    public interface IVsSolutionRestoreService2
    {
        /// <summary>
        /// An entry point which allows non-NETCore SDK based projects to indicate given project needs to be restored.
        /// </summary>
        /// <param name="projectUniqueName">
        /// Unique identificator of the project. Should be a full path to project file.
        /// </param>
        /// <param name="token">Cancellation token.</param>
        /// <returns>
        /// Returns a restore task corresponding to the nominated project request.
        /// NuGet will batch restore requests so it's possible the same restore task will be returned for multiple projects.
        /// When the requested restore operation for the given project completes the task will indicate operation success or failure.
        /// </returns>
        Task<bool> NominateProjectAsync(string projectUniqueName, CancellationToken token);
    }

Interfaccia IVsSolutionRestoreService3

    /// <summary>
    /// Represents a package restore service API for integration with a project system.
    /// </summary>
    public interface IVsSolutionRestoreService3
    {
        /// <summary>
        /// A task providing last/current restore operation status.
        /// Could be null if restore has not started yet.
        /// </summary>
        /// <remarks>
        /// This task is a reflection of the current state of the current-restore-operation or
        /// recently-completed-restore. The usage of this property will be to continue,
        /// e.g. to build solution or something) on completion of this task.
        /// Also, on completion, if the task returns false then it means the restore failed and
        /// the build task will be terminated.
        /// </remarks>
        Task<bool> CurrentRestoreOperation { get; }

        /// <summary>
        /// An entry point used by CPS to indicate given project needs to be restored.
        /// This entry point also handles PackageDownload items
        /// </summary>
        /// <param name="projectUniqueName">
        /// Unique identifier of the project. Should be a full path to project file.
        /// </param>
        /// <param name="projectRestoreInfo">Metadata <see cref="IVsProjectRestoreInfo2"/> needed for restoring the project.</param>
        /// <param name="token">Cancellation token.</param>
        /// <returns>
        /// Returns a restore task corresponding to the nominated project request.
        /// NuGet will batch restore requests so it's possible the same restore task will be returned for multiple projects.
        /// When the requested restore operation for the given project completes the task will indicate operation success or failure.
        /// </returns>
        /// <exception cref="ArgumentException">Thrown if <paramref name="projectUniqueName" /> is not the path of a project file.</exception>
        /// <exception cref="ArgumentNullException">Thrown if <paramref name="projectRestoreInfo" /> is <c>null</c>.</exception>
        /// <exception cref="OperationCanceledException">Thrown if <paramref name="token" /> is cancelled.</exception>
        Task<bool> NominateProjectAsync(string projectUniqueName, IVsProjectRestoreInfo2 projectRestoreInfo, CancellationToken token);
    }

Interfaccia IVsSolutionRestoreService4

    /// <summary>
    /// Represents a package restore service API for integration with a project system.
    /// Implemented by NuGet.
    /// </summary>
    public interface IVsSolutionRestoreService4 : IVsSolutionRestoreService3
    {
        /// <summary>
        /// A project system can call this service (optionally) to register itself to coordinate restore. <br/>
        /// Each project can only register once. NuGet will call into the source to wait for nominations for restore. <br/>
        /// NuGet will remove the registered object when a project is unloaded.
        /// </summary>
        /// <param name="restoreInfoSource">Represents a project specific info source</param>
        /// <param name="cancellationToken">Cancellation token.</param>
        /// <exception cref="InvalidOperationException">If the project has already been registered.</exception>
        /// <exception cref="ArgumentNullException">If <paramref name="restoreInfoSource"/> is null. </exception>
        /// <exception cref="ArgumentException">If <paramref name="restoreInfoSource"/>'s <see cref="IVsProjectRestoreInfoSource.Name"/> is <see langword="null"/>. </exception>
        Task RegisterRestoreInfoSourceAsync(IVsProjectRestoreInfoSource restoreInfoSource, CancellationToken cancellationToken);
    }

Interfaccia IVsProjectRestoreInfoSource

    /// <summary>
    /// Represents a package restore service API for integration with a project system.
    /// Implemented by the project-system.
    /// </summary>
    public interface IVsProjectRestoreInfoSource
    {
        /// <summary>
        /// Project Unique Name.
        /// Must be equivalent to the name provided in the <see cref="IVsSolutionRestoreService3.NominateProjectAsync(string, IVsProjectRestoreInfo2, CancellationToken)"/> or equivalent.
        /// </summary>
        /// <remarks>Never <see langword="null"/>.</remarks>
        string Name { get; }

        /// <summary>
        /// Whether the source needs to do some work that could lead to a nomination. <br/>
        /// Called frequently, so it should be very efficient.
        /// </summary>
        bool HasPendingNomination { get; }

        /// <summary>
        /// NuGet calls this method to wait on a potential nomination. <br/>
        /// If the project has no pending restore data, it will return a completed task. <br/>
        /// Otherwise, the task will be completed once the project nominates. <br/>
        /// The task will be cancelled, if the source decide it no longer needs to nominate (for example: the restore state has no change) <br/>
        /// The task will be failed, if the source runs into a problem, and it cannot get the correct data to nominate (for example: DT build failed) <br/>
        /// </summary>
        /// <param name="cancellationToken">Cancellation token.</param>
        Task WhenNominated(CancellationToken cancellationToken);
    }

Interfaccia IVsSolutionRestoreStatusProvider

    /// <summary>
    /// Provides the status of IVsSolutionRestore.
    /// </summary>
    public interface IVsSolutionRestoreStatusProvider
    {
        /// <summary>
        /// IsRestoreCompleteAsync indicates whether or not automatic package restore has pending work.
        /// Automatic package restore applies for both packages.config and PackageReference projects.
        ///
        /// Returns true if all projects in the solution that require nomination have been nominated for restore and all pending restores have completed.
        /// The result does not indicate that restore completed successfully, a failed restore will still return true.
        /// </summary>
        /// <remarks>
        /// Special cases:
        /// * An empty solution will return true.
        /// * If no solution is open this will true.
        /// * An invalid project that does not provide restore details will cause this to return false since restore will not run for that project.
        ///
        /// Restores running due to Install/Update/Uninstall operations are NOT included in this status. Status here is limited to IVsSolutionRestoreService.
        /// </remarks>
        Task<bool> IsRestoreCompleteAsync(CancellationToken token);
    }

Condividi tramite

API NuGet in Visual Studio

Versioni dei pacchetti

Sdk client NuGet nelle estensioni di Visual Studio

Elenco servizi

Servizi negoziati

Servizi MEF

NuGet.VisualStudio

NuGet.SolutionRestoreManager

Uso dei servizi NuGet

Servizi negoziati

Servizi MEF

Informazioni sui sistemi di progetto .NET

Interfaccia INuGetProjectService

Interfaccia IRegistryKey

Interfaccia IVsCredentialProvider

Interfaccia IVsFrameworkCompatibility

Interfaccia IVsFrameworkCompatibility2

Interfaccia IVsFrameworkCompatibility3

Interfaccia IVsFrameworkParser

Interfaccia IVsFrameworkParser2

Interfaccia IVsGlobalPackagesInitScriptExecutor

Interfaccia IVsPackageInstaller

Interfaccia IVsPackageinstaller2

Interfaccia IVsPackageInstallerEvents

Interfaccia IVsPackageInstallerProjectEvents

Interfaccia IVsPackageInstallerServices

Interfaccia IVsPackageManagerProvider

Interfaccia IVsPackageRestorer

Interfaccia IVsPackageSourceProvider

Interfaccia IVsPackageUninstaller

Interfaccia IVsPathContext

Interfaccia IVsPathContext2

Interfaccia IVsPathContextProvider

Interfaccia IVsPathContextProvider2

Interfaccia IVsProjectJsonToPackageReferenceMigrator

Interfaccia IVsSemanticVersionComparer

Interfaccia IVsNuGetProjectUpdateEvents

Interfaccia IVsSolutionRestoreService

Interfaccia IVsSolutionRestoreService2

Interfaccia IVsSolutionRestoreService3

Interfaccia IVsSolutionRestoreService4

Interfaccia IVsProjectRestoreInfoSource

Interfaccia IVsSolutionRestoreStatusProvider

Commenti e suggerimenti

Risorse aggiuntive