Condividi tramite

Easy debugging of CGI / FASTCGI application

  • Articolo

Debugging CGI/FastCGI issues on IIS can be tricky because of the multiple processes involved (application pool process(s) – w3wp.exe – and CGI process(es) – typically php-cgi.exe). You may already be aware of the following step-by-step article which describes how to debug CGI: HOW TO: Debug Common Gateway Interface Applications Running Under IIS by Using Visual Studio. In this article, I will be demonstrating a simple method to trap CGI output using WinDbg. I've used this method a couple of times to dump out CGI output causing typical issues like this one: CGI Error:The specified CGI application misbehaved by not returning a complete set of HTTP headers.

For the needs of our debug lab, I will use the following setup :

As expected, accessing the above page from IE shows HTTP 500 error:

A FREB trace clearly shows that the HTTP 500 error is set by the FastCgiModule:

What occurs in our scenario is that the FastCGI module is submitting the request to a php-cgi process. The result of the php execution (HTTP 500) is then passed back to the FastCgiModule. Let's confirm this using the debugger:

  • Install Debugging Tools (https://msdn.microsoft.com/en-us/windows/hardware/gg463009.aspx)

  • Attach Windbg to the application pool (W3WP) – if you don't know which application pool to attach to, use this article : Which w3wp.exe PID corresponds to which application pool ?

  • Setup symbol path as needed, use the ".childdbg 1" command to instruct windbg to break when child process is created and type g to resume execution (commands to type are in bold) :

    0:037> .sympath SRV*c:\pubsymcache*https://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*c:\pubsymcache*https://msdl.microsoft.com/download/symbols
    Expanded Symbol search path is: srv*c:\pubsymcache*https://msdl.microsoft.com/download/symbols
    0:037>
    .reloadReloading current modules
    ................................................................
    0:037> .childdbg 1
    Processes created by the current process will be debugged
    0:037> g

  • At this point, let's access our err500.php page from Internet Explorer. This will produce the following output in Windbg:

    Executable search path is:
    ModLoad: 00000000`00d50000 00000000`00d5e000 php-cgi.exe
    ModLoad: 00000000`778a0000 00000000`77a49000 ntdll.dll
    ModLoad: 00000000`77a80000 00000000`77c00000 ntdll32.dll
    <snip>
    (36c8.178c): Break instruction exception - code 80000003 (first chance)
    ntdll!LdrpDoDebuggerBreak+0x30:
    00000000`7794cb60 cc int 3

  • Now that we are in the initialization sequence of php-cgi.exe, we can place a breakpoint on WriteFile to dump output from php-cgi (Note : if php-cgi makes use of WriteFile() from some other reason (ex : write content to disk), this output will also be dumped…) :

    1:037> bp kernel32!WriteFile "db poi(esp+8) l poi(esp+(3*4))"
    Bp expression 'kernel32!WriteFile' could not be resolved, adding deferred bp

    Note : If the child CGI process is running on a 64 bit architecture (x64), you can use the following breakpoint :
    bp KERNELBASE!WriteFile "db rdx l r8"

  • let's resume execution of php-cgi.exe :

    1:037> g

  • the following output is displayed and we then break on kernel32!WriteFile :

    <snip>
    020918c4 01 06 00 01 00 5a 06 00-53 74 61 74 75 73 3a 20 .....Z..Status:
    020918d4 35 30 30 20 49 6e 74 65-72 6e 61 6c 20 53 65 72 500 Internal Ser
    020918e4 76 65 72 20 45 72 72 6f-72 0d 0a 58 2d 50 6f 77 ver Error..X-Pow
    020918f4 65 72 65 64 2d 42 79 3a-20 50 48 50 2f 35 2e 34 ered-By: PHP/5.4
    02091904 2e 36 0d 0a 43 6f 6e 74-65 6e 74 2d 74 79 70 65 .6..Content-type
    02091914 3a 20 74 65 78 74 2f 68-74 6d 6c 0d 0a 0d 0a 20 : text/html....
    02091924 0d 0a 00 00 00 00 00 00-01 03 00 01 00 08 00 00 ................
    02091934 00 00 00 00 00 00 00 00 ........
    kernel32!WriteFile:
    76a117e1 ff25e409a176 jmp dword ptr [kernel32!_imp__WriteFile (76a109e4)] ds:002b:76a109e4={KERNELBASE!WriteFile (7614d3a2)}

  • using the k command, we can see the callstack up to the WriteFile call :

    1:037:x86> k
    ChildEBP RetAddr
    00a4cb5c 68939bde kernel32!WriteFile
    00a4e668 68939d37 MSVCR90!_write_nolock+0x67e
    00a4e6ac 00d56bc6 MSVCR90!_write+0x9f
    WARNING: Stack unwind information not available. Following frames may be wrong.
    00a4e6d0 00d570e2 php_cgi+0x6bc6
    00a4e6e8 00d5221b php_cgi+0x70e2
    00a4e6f4 64633d15 php_cgi+0x221b

You can use the above method to debug any CGI/FASTCGI issue and hopefully point the root cause of issues dealing with missing headers, CGI process crash…etc

Happy CGI/FastCgi Debugging!

Emmanuel

Comments

  • Anonymous
    June 30, 2017
    The comment has been removed
    • Anonymous
      October 03, 2017
      Thank you for the encouragement. Will try and continue to post interesting articles, so keep coming back!
  • Anonymous
    August 13, 2017
    Hello everyone, it's my first pay a visit at this website, and paragraph is genuinely fruitful designed for me, keep up posting such content.
  • Anonymous
    January 01, 2018
    I do not even understand how I ended up right here, however I assumed this submit was great. I don't recognise who you are but definitely you are going to a well-known blogger in the event you aren't already.Cheers!