Active Directory Powershell to manage Sites and Subnets – Part 2 (New-XADSubnet)

Articolo
08/11/2009

In an earlier post “Active Directory Powershell to manage sites – Part 1 (New-XADSite)” Jairo explained in detail about how to create a Site in Active Directory using AD Powershell. In today’s post I am going to discuss about how to create Subnets using AD Powershell.

Before going into details of creating a subnet object, first let us understand what is a Site and Subnet.

The following definition is from: https://technet.microsoft.com/en-us/library/cc782048(WS.10).aspx

In Active Directory, a site is a set of computers well-connected by a high-speed network, such as a local area network (LAN). All computers within the same site typically reside in the same building, or on the same campus network. A single site consists of one or more Internet Protocol (IP) subnets. Subnets are subdivisions of an IP network, with each subnet possessing its own unique network address. A subnet object in AD DS groups neighboring computers in much the same way that postal codes group neighboring postal addresses .

Sites and subnets are represented in Active Directory by site and subnet objects. Each site object is associated with one or more subnet objects. By associating a site with one or more subnets, you assign a set of IP addresses to the site.

NOTE: The term "subnet" in AD DS does not have the strict networking definition of the set of all addresses behind a single router. The only requirement for an AD DS subnet is that the address prefix conforms to the IP version 4 (IPv4) or IP version 6 (IPv6) format.

A subnet object (objectClass=subnet) in AD DS stores the prefix information in its name and the site information in attribute siteObject. It should be created under “CN=Subnets,CN=Sites,<Configuration-NC>”. For documentation on “how to determine the prefix of a subnet” bing for the phrase “Entering Address Prefixes”.

I have written a function below called New-XADSubnet that creates a new subnet. It accepts the subnet-prefix, site name, description and location of the subnet as input. The function also does some validation to provide a reliable experience, for example: it validates whether the specified subnet prefix length is correct or not. If a prefix length is not specified then this function will auto-generate the prefix length based on the number of trailing zero bits found in the prefix-ip-address.

NOTE: The script below uses Test-XADObject function published in a previous post.

    1:  #

    2:  # Advanced Function to create a new subnet.

    3:  #

    4:  function New-XADSubnet() {

    5:     [CmdletBinding(ConfirmImpact="Low")]

    6:     Param (

    7:        [Parameter(Mandatory=$true,

    8:                   Position=0,

    9:                   ValueFromPipeline=$true,

   10:                   HelpMessage="Prefix of the subnet to be created. This should be a combination of IP Address followed by / and Prefix length. IPv4 example: 157.54.208.0/20  IPv6 example: 3FFE:FFFF:0:C000::/64 . NOTE: If the prefix length is not specified then this cmdlet will auto-generate the prefix length based on the number of trailing zero bits. For example: If supplied Prefix is 157.54.208.0 then the subnet created is 157.54.208.0/20. Another example: If supplied Prefix is 3FFE:FFFF:0:C000:: then the subnet created is 3FFE:FFFF:0:C000::/34"

   11:                  )]

   12:        [String] $Prefix,

   13:        [Parameter(Mandatory=$false,

   14:                   Position=1,

   15:                   ValueFromPipeline=$false,

   16:                   HelpMessage="Site to which the subnet will be applied. Accepts Site name, Guid, DN or ADObject representing the site"

   17:                  )]

   18:        [Object] $Site,

   19:        [Parameter(Mandatory=$false,

   20:                   ValueFromPipeline=$false,

   21:                   HelpMessage="Description"

   22:                  )]

   23:        [String] $Description,

   24:        [Parameter(Mandatory=$false,

   25:                   ValueFromPipeline=$false,

   26:                   HelpMessage="Location"

   27:                  )]

   28:        [String] $Location

   29:     )

   30:     PROCESS {

31:

   32:        if ([String]::IsNullOrEmpty($Prefix)) {

   33:           throw New-Object System.Management.Automation.PSArgumentException("Prefix name cannot be an empty string, please try again.")

   34:        }

35:

   36:        $newSubnetName = $Prefix

37:

   38:        if ($Prefix.Contains("/")) {

   39:            $subnetIPAddressStr,$prefixLengthStr = $newSubnetName.Split("/")

   40:            $subnetIPAddress = [System.Net.IPAddress]::Parse($subnetIPAddressStr)

   41:            $specifiedPrefixLength = [int]::Parse($prefixLengthStr)

42:

   43:            $ipAddressPrefixLength = GetIPAddressPrefixLength $subnetIPAddress

   44:            if ($ipAddressPrefixLength -gt $specifiedPrefixLength) {

   45:                throw New-Object System.Management.Automation.PSArgumentException("The subnet prefix length you specified is incorrect. Please check the prefix and try again.")

   46:            }

47:

   48:        } else {

   49:            $subnetIPAddress = [System.Net.IPAddress]::Parse($newSubnetName)

   50:            $prefixLength = GetIPAddressPrefixLength $subnetIPAddress

   51:            $newSubnetName = $newSubnetName + "/" + $prefixLength

   52:        }

53:

   54:        # Get the configuration partition DN, the sites container and build the new site DN

   55:        $configNCDN = (Get-ADRootDSE).ConfigurationNamingContext

   56:        $subnetContainerDN = ("CN=Subnets,CN=Sites," + $configNCDN)

   57:        $newSubnetDN = ("CN=" + $newSubnetName +"," + $subnetContainerDN)

   58:        $siteDN = $null

   59:        if ($Site -ne $null) {

   60:            $siteDN = (Get-XADSite $Site).DistinguishedName

   61:        }

62:

   63:        # Verify if the subnet already exists

   64:        $subnetExists = Test-XADObject -Identity $newSubnetDN

   65:        if ($subnetExists) {

   66:           throw New-Object System.Management.Automation.PSArgumentException("Subnet already exists. Please check the name and try again.")

   67:        }

68:

   69:        [Hashtable] $ht = new-object -type hashtable

   70:        if ($siteDN -ne $null) {

   71:            $ht.Add("siteObject", $siteDN)

   72:        }

   73:        if (-not [String]::IsNullOrEmpty($Description)) {

   74:            $ht.Add("description", $Description)

   75:        }

   76:        if (-not [String]::IsNullOrEmpty($Location)) {

   77:            $ht.Add("location", $Location)

   78:        }

79:

80:

   81:        # Create subnet object

   82:        if ($ht.Count -eq 0) {

   83:            New-ADObject -Name $newSubnetName -Path $subnetContainerDN -Type subnet

   84:        } else {

   85:            New-ADObject -Name $newSubnetName -Path $subnetContainerDN -Type subnet -OtherAttributes $ht

   86:        }

87:

   88:        # Fetch the subnet object

   89:        Get-ADObject $newSubnetDN -properties "siteObject", "description", "location"

90:

   91:      }

   92:  }

93:

94:

95:

   96:  #

   97:  # Internal utility function

   98:  # This function returns the number of trailing zeroes in the input byte

   99:  #

  100:  function GetNumberOfTrailingZeroes {

  101:  Param ([byte] $x)

  102:  $numOfTrailingZeroes = 0;

  103:  if ( $x -eq 0) {

  104:     return 8

  105:  }

  106:  if ( $x % 2 -eq 0) {

  107:     $numOfTrailingZeroes ++;

  108:     $numOfTrailingZeroes +=  GetNumberOfTrailingZeroes($x/2);

  109:  }

  110:  return $numOfTrailingZeroes

  111:  }

  112:

  113:

  114:

  115:

  116:  #

  117:  # Internal utility function

  118:  # This function returns the number of non-zero bits in an ip-address

  119:  #

  120:  function GetIPAddressPrefixLength {

  121:  Param ([System.Net.IPAddress] $ipAddress)

  122:  $byteArray = $ipAddress.GetAddressBytes()

  123:  $numOfTrailingZeroes = 0;

  124:  for ($i = $byteArray.Length - 1; $i -ge 0; $i--) {

  125:      $numOfZeroesInByte = GetNumberOfTrailingZeroes($byteArray[$i]);

  126:      if ($numOfZeroesInByte -eq 0) {

  127:         break;

  128:      }

  129:      $numOfTrailingZeroes += $numOfZeroesInByte;

  130:  }

  131:  (($byteArray.Length * 8) - $numOfTrailingZeroes)

  132:  }

Sample usage in my test environment:

PS AD:\>
PS AD:\> New-XADSubnet "10.10.0.0/16" -Location "Redmond,WA" -Description "Redmond Subnet"

Description       : Redmond Subnet
DistinguishedName : CN=10.10.0.0/16,CN=Subnets,CN=Sites,CN=Configuration,DC=dsw
                    amipat-w7-vm1,DC=nttest,DC=microsoft,DC=com
location          : Redmond,WA
Name              : 10.10.0.0/16
ObjectClass       : subnet
ObjectGUID        : e4c924ff-ee39-47e3-8b92-71a8600188af

Cheers,

Swami

Swaminathan Pattabiraman

Developer – Active Directory Powershell Team

Comments

Anonymous
October 29, 2010
The comment has been removed
Anonymous
July 26, 2011
It seems the code references a function Get-XADSite which isn't defined in provided code. Can you please provide missing code?
Anonymous
February 29, 2012
The comment has been removed
Anonymous
March 27, 2012
I had to manually create the Get-XADSite function using code examples from the Part 3 of this series:blogs.msdn.com/.../active-directory-powershell-to-manage-sites-and-subnets-part-3-getting-site-and-subnets.aspxHere is the function that I put together:Get a specified Active Directory Site. function Get-XADSite() {
```
Param ([String] $siteName)$configNCDN = (Get-ADRootDSE).ConfigurationNamingContext$siteContainerDN = (&quot;CN=Sites,&quot; + $configNCDN)$siteDN = &quot;CN=&quot; + $siteName + &quot;,&quot; + $siteContainerDNreturn Get-ADObject -Identity $siteDN
```
}I've tested this with the New-XADSite function and it works; just created 45 subnets and associated them with appropriate sites.
Anonymous
May 14, 2012
thancks PS AD:> PS AD:> New-XADSubnet "10.10.0.0/16" -Location "Redmond,WA" -Description "Redmond Subnet" Description : Redmond Subnet DistinguishedName : CN=10.10.0.0/16,CN=Subnets,CN=Sites,CN=Configuration,DC=dsw amipat-w7-vm1,DC=nttest,DC=microsoft,DC=com location : Redmond,WA Name : 10.10.0.0/16 ObjectClass : subnet ObjectGUID : e4c924ff-ee39-47e3-8b92-71a8600188af # # Advanced Function to create a new subnet. # function New-XADSubnet() { [CmdletBinding(ConfirmImpact="Low")] Param ( [Parameter(Mandatory=$true, Position=0, ValueFromPipeline=$true, HelpMessage="Prefix of the subnet to be created. This should be a combination of IP Address followed by / and Prefix length. IPv4 example: 157.54.208.0/20 IPv6 example: 3FFE:FFFF:0:C000::/64 . NOTE: If the prefix length is not specified then this cmdlet will auto-generate the prefix length based on the number of trailing zero bits. For example: If supplied Prefix is 157.54.208.0 then the subnet created is 157.54.208.0/20. Another example: If supplied Prefix is 3FFE:FFFF:0:C000:: then the subnet created is 3FFE:FFFF:0:C000::/34" )] [String] $Prefix, [Parameter(Mandatory=$false, Position=1, ValueFromPipeline=$false, HelpMessage="Site to which the subnet will be applied. Accepts Site name, Guid, DN or ADObject representing the site" )] [Object] $Site, [Parameter(Mandatory=$false, ValueFromPipeline=$false, HelpMessage="Description" )] [String] $Description, [Parameter(Mandatory=$false, ValueFromPipeline=$false, HelpMessage="Location" )] [String] $Location ) 30: PROCESS { if ([String]::IsNullOrEmpty($Prefix)) { throw New-Object System.Management.Automation.PSArgumentException("Prefix name cannot be an empty string, please try again.") } $newSubnetName = $Prefix if ($Prefix.Contains("/")) { $subnetIPAddressStr,$prefixLengthStr = $newSubnetName.Split("/") $subnetIPAddress = [System.Net.IPAddress]::Parse($subnetIPAddressStr) $specifiedPrefixLength = [int]::Parse($prefixLengthStr) $ipAddressPrefixLength = GetIPAddressPrefixLength $subnetIPAddress if ($ipAddressPrefixLength -gt $specifiedPrefixLength) { throw New-Object System.Management.Automation.PSArgumentException("The subnet prefix length you specified is incorrect. Please check the prefix and try again.") } } else { $subnetIPAddress = [System.Net.IPAddress]::Parse($newSubnetName) $prefixLength = GetIPAddressPrefixLength $subnetIPAddress $newSubnetName = $newSubnetName + "/" + $prefixLength } # Get the configuration partition DN, the sites container and build the new site DN $configNCDN = (Get-ADRootDSE).ConfigurationNamingContext $subnetContainerDN = ("CN=Subnets,CN=Sites," + $configNCDN) $newSubnetDN = ("CN=" + $newSubnetName +"," + $subnetContainerDN) $siteDN = $null if ($Site -ne $null) { $siteDN = (Get-XADSite $Site).DistinguishedName } # Verify if the subnet already exists $subnetExists = Test-XADObject -Identity $newSubnetDN if ($subnetExists) { throw New-Object System.Management.Automation.PSArgumentException("Subnet already exists. Please check the name and try again.") } [Hashtable] $ht = new-object -type hashtable if ($siteDN -ne $null) { $ht.Add("siteObject", $siteDN) } if (-not [String]::IsNullOrEmpty($Description)) { $ht.Add("description", $Description) } if (-not [String]::IsNullOrEmpty($Location)) { $ht.Add("location", $Location) } # Create subnet object if ($ht.Count -eq 0) { New-ADObject -Name $newSubnetName -Path $subnetContainerDN -Type subnet } else { New-ADObject -Name $newSubnetName -Path $subnetContainerDN -Type subnet -OtherAttributes $ht } # Fetch the subnet object Get-ADObject $newSubnetDN -properties "siteObject", "description", "location" } } # # Internal utility function # This function returns the number of trailing zeroes in the input byte # 100: function GetNumberOfTrailingZeroes { Param ([byte] $x) $numOfTrailingZeroes = 0; if ( $x -eq 0) { return 8 } if ( $x % 2 -eq 0) { $numOfTrailingZeroes ++; $numOfTrailingZeroes += GetNumberOfTrailingZeroes($x/2); } 110: return $numOfTrailingZeroes } # # Internal utility function # This function returns the number of non-zero bits in an ip-address # function GetIPAddressPrefixLength { Param ([System.Net.IPAddress] $ipAddress) $byteArray = $ipAddress.GetAddressBytes() $numOfTrailingZeroes = 0; 124: for ($i = $byteArray.Length - 1; $i -ge 0; $i--) { $numOfZeroesInByte = GetNumberOfTrailingZeroes($byteArray[$i]); if ($numOfZeroesInByte -eq 0) { break; } $numOfTrailingZeroes += $numOfZeroesInByte; } (($byteArray.Length * 8) - $numOfTrailingZeroes) }

Condividi tramite

Active Directory Powershell to manage Sites and Subnets – Part 2 (New-XADSubnet)

Comments

Risorse aggiuntive