PWINBIO_ENROLL_CAPTURE_CALLBACK fonction de rappel (winbio.h)

Article
03/03/2024

La fonction PWINBIO_ENROLL_CAPTURE_CALLBACK est appelée par l’infrastructure biométrique Windows pour retourner les résultats de la fonction asynchrone WinBioEnrollCaptureWithCallback . L’application cliente doit implémenter cette fonction.

Important Nous vous recommandons, à compter de Windows 8, de ne plus utiliser la combinaison PWINBIO_ENROLL_CAPTURE_CALLBACK/WinBioEnrollCaptureWithCallback. Au lieu de cela, procédez comme suit :

Implémentez une fonction PWINBIO_ASYNC_COMPLETION_CALLBACK pour recevoir une notification à la fin de l’opération.
Appelez la fonction WinBioAsyncOpenSession . Transmettez l’adresse de votre rappel dans le paramètre CallbackRoutine . Passez WINBIO_ASYNC_NOTIFY_CALLBACK dans le paramètre NotificationMethod . Récupérer un handle de session asynchrone.
Utilisez le handle de session asynchrone pour appeler WinBioEnrollCapture. Une fois l’opération terminée, l’infrastructure biométrique Windows alloue et initialise une structure WINBIO_ASYNC_RESULT avec les résultats et appelle votre rappel avec un pointeur vers la structure des résultats.
Appelez WinBioFree à partir de votre implémentation de rappel pour libérer la structure WINBIO_ASYNC_RESULT une fois que vous avez terminé de l’utiliser.

Syntaxe

PWINBIO_ENROLL_CAPTURE_CALLBACK PwinbioEnrollCaptureCallback;

void PwinbioEnrollCaptureCallback(
  [in, optional] PVOID EnrollCallbackContext,
  [in]           HRESULT OperationStatus,
  [in]           WINBIO_REJECT_DETAIL RejectDetail
)
{...}

Paramètres

[in, optional] EnrollCallbackContext

Pointeur vers une mémoire tampon définie par l’application et passée au paramètre EnrollCallback de la fonction WinBioEnrollCaptureWithCallback . La mémoire tampon n’est pas modifiée par l’infrastructure ou l’unité biométrique. Votre application peut utiliser les données pour l’aider à déterminer les actions à effectuer ou pour conserver des informations supplémentaires sur la capture biométrique.

[in] OperationStatus

Code d’erreur retourné par l’opération de capture.

[in] RejectDetail

Informations supplémentaires sur l’échec, le cas échéant, d’effectuer l’opération. Pour plus d'informations, consultez la section Notes.

Valeur de retour

None

Remarques

Actuellement, l’infrastructure biométrique Windows prend uniquement en charge les lecteurs d’empreintes digitales. Par conséquent, si une opération échoue et retourne des informations supplémentaires dans une constante WINBIO_REJECT_DETAIL , il s’agit de l’une des valeurs suivantes :

WINBIO_FP_TOO_HIGH
WINBIO_FP_TOO_LOW
WINBIO_FP_TOO_LEFT
WINBIO_FP_TOO_RIGHT
WINBIO_FP_TOO_FAST
WINBIO_FP_TOO_SLOW
WINBIO_FP_POOR_QUALITY
WINBIO_FP_TOO_SKEWED
WINBIO_FP_TOO_SHORT
WINBIO_FP_MERGE_FAILURE

Exemples

L’exemple de code suivant inscrit une empreinte digitale de manière asynchrone en appelant WinBioEnrollCaptureWithCallback et en passant un pointeur vers une fonction de rappel personnalisée, EnrollCaptureCallback. Lien vers la bibliothèque statique Winbio.lib.

//------------------------------------------------------------------------
// EnrollSystemPoolWithCallback.cpp : console application entry point.
//

#include <windows.h>
#include <stdio.h>
#include <conio.h>
#include <winbio.h>


//------------------------------------------------------------------------
// Forward declarations.
//
HRESULT EnrollSysPoolWithCallback(
                      BOOL bCancel,
                      BOOL bDiscard,
                      WINBIO_BIOMETRIC_SUBTYPE subFactor);

VOID CALLBACK EnrollCaptureCallback(
                      __in_opt PVOID EnrollCallbackContext,
                      __in HRESULT OperationStatus,
                      __in WINBIO_REJECT_DETAIL RejectDetail);

typedef struct _ENROLL_CALLBACK_CONTEXT {
    WINBIO_SESSION_HANDLE SessionHandle;
    WINBIO_UNIT_ID UnitId;
    WINBIO_BIOMETRIC_SUBTYPE SubFactor;
} ENROLL_CALLBACK_CONTEXT, *PENROLL_CALLBACK_CONTEXT;

//------------------------------------------------------------------------
int wmain()
{
    HRESULT hr = S_OK;

    hr = EnrollSysPoolWithCallback(
                      FALSE, 
                      FALSE, 
                      WINBIO_ANSI_381_POS_RH_INDEX_FINGER);

    return 0;
}

//------------------------------------------------------------------------
// The following function enrolls a user's fingerprint in the system pool.
// The function calls WinBioEnrollCaptureWithCallback and waits for the
// asynchronous enrollment process to be completed or canceled.
//
HRESULT EnrollSysPoolWithCallback(
                      BOOL bCancel,
                      BOOL bDiscard,
                      WINBIO_BIOMETRIC_SUBTYPE subFactor)
{
    // Declare variables
    HRESULT hr = S_OK;
    WINBIO_IDENTITY identity = {0};
    WINBIO_SESSION_HANDLE sessionHandle = NULL;
    WINBIO_UNIT_ID unitId = 0;
    BOOLEAN isNewTemplate = TRUE;
    ENROLL_CALLBACK_CONTEXT callbackContext = {0};

    // Connect to the system pool. 
    hr = WinBioOpenSession( 
            WINBIO_TYPE_FINGERPRINT,    // Service provider
            WINBIO_POOL_SYSTEM,         // Pool type
            WINBIO_FLAG_DEFAULT,        // Configuration and access
            NULL,                       // Array of biometric unit IDs
            0,                          // Count of biometric unit IDs
            NULL,                       // Database ID
            &sessionHandle              // [out] Session handle
            );
    if (FAILED(hr))
    {
        wprintf_s(L"\n WinBioEnumBiometricUnits failed. ");
        wprintf_s(L"hr = 0x%x\n", hr);
        goto e_Exit;
    }

    // Locate the sensor.
    wprintf_s(L"\n Swipe your finger to locate the sensor...\n");
    hr = WinBioLocateSensor( sessionHandle, &unitId);
    if (FAILED(hr))
    {
        wprintf_s(L"\n WinBioLocateSensor failed. hr = 0x%x\n", hr);
        goto e_Exit;
    }

    // Begin the enrollment sequence. 
    hr = WinBioEnrollBegin(
            sessionHandle,      // Handle to open biometric session
            subFactor,          // Finger to create template for
            unitId              // Biometric unit ID
            );
    if (FAILED(hr))
    {
        wprintf_s(L"\n WinBioEnrollBegin failed. hr = 0x%x\n", hr);
        goto e_Exit;
    }

    // Set up the custom callback context structure.
    callbackContext.SessionHandle = sessionHandle;
    callbackContext.UnitId = unitId;
    callbackContext.SubFactor = subFactor;

    // Call WinBioEnrollCaptureWithCallback. This is an asynchronous
    // method that returns immediately.
    hr = WinBioEnrollCaptureWithCallback(
            sessionHandle,          // Handle to open biometric session
            EnrollCaptureCallback,  // Callback function
            &callbackContext        // Pointer to the custom context
            );
    if (FAILED(hr))
    {
        wprintf_s(L"\n WinBioEnrollCaptureWithCallback failed. ");
        wprintf_s(L"hr = 0x%x\n", hr);
        goto e_Exit;
    }
    wprintf_s(L"\n Swipe the sensor with the appropriate finger...\n");

    // Cancel the enrollment if the bCancel flag is set.
    if (bCancel)
    {
        wprintf_s(L"\n Starting CANCEL timer...\n");
        Sleep( 7000 );

        wprintf_s(L"\n Calling WinBioCancel\n");
        hr = WinBioCancel( sessionHandle );
        if (FAILED(hr))
        {
            wprintf_s(L"\n WinBioCancel failed. hr = 0x%x\n", hr);
            goto e_Exit;
        }
    }

    // Wait for the asynchronous enrollment process to complete
    // or be canceled.
    hr = WinBioWait( sessionHandle );
    if (FAILED(hr))
    {
        wprintf_s(L"\n WinBioWait failed. hr = 0x%x\n", hr);
    }

    // Discard the enrollment if the bDiscard flag is set.
    // Commit the enrollment if the flag is not set.
    if (bDiscard)
    {
        wprintf_s(L"\n Discarding enrollment...\n");
        hr = WinBioEnrollDiscard( sessionHandle );
        if (FAILED(hr))
        {
            wprintf_s(L"\n WinBioLocateSensor failed. ");
            wprintf_s(L"hr = 0x%x\n", hr);
        }
        goto e_Exit;    
    }
    else
    {
        wprintf_s(L"\n Committing enrollment...\n");
        hr = WinBioEnrollCommit( 
                sessionHandle,      // Handle to open biometric session
                &identity,          // WINBIO_IDENTITY object for the user
                &isNewTemplate);    // Is this a new template

        if (FAILED(hr))
        {
            wprintf_s(L"\n WinBioEnrollCommit failed. hr = 0x%x\n", hr);
            goto e_Exit;
        }
    }

e_Exit:
    if (sessionHandle != NULL)
    {
        WinBioCloseSession(sessionHandle);
        sessionHandle = NULL;
    }

    wprintf_s(L"\n Press any key to exit...");
    _getch();

    return hr;
}

//------------------------------------------------------------------------
// The following function is the callback for the Windows Biometric
// Framework WinBioEnrollCaptureWithCallback() function. 
//
VOID CALLBACK EnrollCaptureCallback(
    __in_opt PVOID EnrollCallbackContext,
    __in HRESULT OperationStatus,
    __in WINBIO_REJECT_DETAIL RejectDetail
    )
{
    // Declare variables.
    HRESULT hr = S_OK; 
    static SIZE_T swipeCount = 1;

    PENROLL_CALLBACK_CONTEXT callbackContext = 
        (PENROLL_CALLBACK_CONTEXT)EnrollCallbackContext;

    wprintf_s(L"\n EnrollCaptureCallback executing\n");
    wprintf_s(L"\n Sample %d captured", swipeCount++);

    // The capture was not acceptable or the enrollment operation
    // failed.
    if (FAILED(OperationStatus))
    {
        if (OperationStatus == WINBIO_E_BAD_CAPTURE)
        {
            wprintf_s(L"\n Bad capture; reason: %d\n", RejectDetail);
            wprintf_s(L"\n Swipe your finger to capture another sample.\n");

            // Try again.
            hr = WinBioEnrollCaptureWithCallback(
                    callbackContext->SessionHandle, // Open session handle
                    EnrollCaptureCallback,          // Callback function
                    EnrollCallbackContext           // Callback context
                    );
            if (FAILED(hr))
            {
                wprintf_s(L"WinBioEnrollCaptureWithCallback failed.");
                wprintf_s(L"hr = 0x%x\n", hr);
            }
        }
        else
        {
            wprintf_s(L"EnrollCaptureCallback failed.");
            wprintf_s(L"OperationStatus = 0x%x\n", OperationStatus);
        }
        goto e_Exit;
    }

    // The enrollment operation requires more fingerprint swipes.
    // This is normal and depends on your hardware. Typically, at least
    // three swipes are required.
    if (OperationStatus == WINBIO_I_MORE_DATA)
    {
        wprintf_s(L"\n More data required.");
        wprintf_s(L"\n Swipe your finger on the sensor again.");

        hr = WinBioEnrollCaptureWithCallback(
                callbackContext->SessionHandle,
                EnrollCaptureCallback,
                EnrollCallbackContext
                );
        if (FAILED(hr))
        {
            wprintf_s(L"WinBioEnrollCaptureWithCallback failed. ");
            wprintf_s(L"hr = 0x%x\n", hr);
        }
        goto e_Exit;
    }

    wprintf_s(L"\n Template completed\n");

e_Exit:

    return;
}

Configuration requise

Condition requise	Valeur
Client minimal pris en charge	Windows 7 [applications de bureau uniquement]
Serveur minimal pris en charge	Windows Server 2008 R2 [applications de bureau uniquement]
Plateforme cible	Windows
En-tête	winbio.h

Partager via