Modèles Sudoers pour l’élévation dans le cadre de la surveillance UNIX/Linux
Une surveillance efficace des systèmes d’exploitation UNIX ou Linux nécessite des autorisations élevées sur le système client pour les tâches de surveillance et de maintenance. Il existe des modèles de configuration sudoers fournis dans cet article pour l’opéraabilité de base.
Introduction
Pour utiliser des comptes sudo pour la surveillance avec Operations Manager, les configurations doivent être mises en place pour autoriser l’élévation des comptes RunAs à l’aide de sudo. Les exigences générales pour les comptes utilisés par Operations Manager avec élévation sudo sont les suivantes :
- Les comptes doivent avoir RequireTTY désactivé en tant que paramètre par défaut.
- Les comptes doivent être configurés pour élever avec NOPASSWD.
- Les comptes doivent avoir la « conférence » qui s’affiche généralement lors de la connexion, et lors de l’élévation à l’aide de sudo, désactivée.
Les modèles fournis spécifient les commandes qui permettent aux comptes d’identification configurés d’exécuter des tâches nécessitant des autorisations élevées telles que :
- Installation de l’agent
- Mise à niveau de l’agent
- Désinstallation de l’agent
- Surveillance des journaux système
- Redémarrage des services d’agent
- Faciliter la création de certificats d’authentification
Remarque
Les commandes et les exigences ne sont pas identiques dans toutes les distributions ou versions UNIX/Linux, vérifiez que vous disposez du modèle approprié pour votre système d’exploitation.
Vous ne voyez pas votre système d’exploitation ? Reportez-vous à la page Versions de système d’exploitation UNIX et Linux prises en charge pour les distributions prises en charge.
Utilisation des modèles
Sélectionnez le modèle approprié pour votre système d’exploitation et remplacez les exemples de comptes par les noms d’utilisateur de votre compte d’identification, notamment d’autres personnalisations organisationnelles si nécessaire.
Dans chaque modèle, il existe deux comptes définis et mappés aux comptes d’identification standard comme suit :
| Compte d'identification | Nom d’utilisateur |
|---|---|
| Compte d’action UNIX/Linux | scomuser |
| Compte de maintenance UNIX/Linux | scomadm |
Une fois mis à jour avec les noms d’utilisateur corrects et toutes les modifications supplémentaires, le modèle doit être ajouté à la configuration sudoers du système client. Il existe généralement deux façons d’ajouter des configurations sudo, soit en modifiant directement le ou /etc/sudo.conf le /etc/sudoers fichier (selon le système d’exploitation), soit en ajoutant un fichier « drop in » sous /etc/sudoers.d (ex. /etc/sudoers.d/scom). Cet article ne décrit pas en détail comment configurer entièrement sudo lui-même. Pour plus d’informations, consultez la documentation fournie par le fournisseur pour votre système d’exploitation spécifique.
AIX
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /usr/bin/ksh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager
#-----------------------------------------------------------------------------------
AIX 7.2
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[0-9].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[0-9].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[0-9].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[0-9].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[0-9].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[0-9].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
## End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
HP-UX
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].hpux.11iv3.ia64.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].hpux.11iv3.ia64.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].hpux.11iv3.ia64.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].hpux.11iv3.ia64.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].hpux.11iv3.ia64.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].hpux.11iv3.ia64.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Red Hat Enterprise Linux (RHEL)
Important
À compter de la version 8, Red Hat Enterprise Linux est sous Linux universel.
RHEL 6
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
RHEL 7
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2022
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
RHEL 7.1 sur Power 8
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
RHEL 7.1 sur Power 8
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Solaris
#-----------------------------------------------------------------------------------
#Example user configuration for Operations Manager 2019
#Example assumes users named: scomadm & scomuser
#Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
#General requirements
Defaults:scomadm !requiretty
#Agent maintenance
##Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
##Install or upgrade
#SOLARIS 10
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
#SOLARIS 11
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
##Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
##Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
###Examples
#Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
#Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
#End user configuration for Operations Manager agent
#-------------------------------------------------------------------------------------
Solaris 10
#-----------------------------------------------------------------------------------
#Example user configuration for Operations Manager 2016
#Example assumes users named: scomadm & scomuser
#Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
#General requirements
Defaults:scomadm !requiretty
#Agent maintenance
##Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
##Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.x86.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.x86.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.x86.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.x86.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.x86.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.x86.sh --upgrade --force
##Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
##Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
###Examples
#Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
#Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
#End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Solaris 11
#-----------------------------------------------------------------------------------
#Example user configuration for Operations Manager 2016
#Example assumes users named: scomadm & scomuser
#Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
#General requirements
Defaults:scomadm !requiretty
#Agent maintenance
##Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
##Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].x86.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].x86.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
##Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
##Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
###Examples
#Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
#Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
#End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
SUSE Linux Enterprise Server (SLES)
Important
À compter de la version 15, SUSE est sous Linux universel.
SLES 12
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2022
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
SLES sur PowerPC (CPP)
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Universal Linux
Linux universel englobe à la fois les systèmes d’exploitation Debian et Red Hat, et est l’endroit où trouver les derniers systèmes d’exploitation et distributions Linux pris en charge. Pour obtenir la liste des distributions qui appartiennent à ce type de classe, reportez-vous à : Versions de système d’exploitation UNIX et Linux prises en charge.
#----------------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2022
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## For ubuntu18
#scomuser ALL=(root) NOPASSWD: /bin/bash -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager
#-----------------------------------------------------------------------------------
#----------------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## For ubuntu18
#scomuser ALL=(root) NOPASSWD: /bin/bash -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
## End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Autres commandes
Lorsque vous utilisez la méthode ExecuteShellScript pour exécuter des scripts avec élévation de privilèges, ajoutez la ligne suivante à votre fichier sudoers pour votre utilisateur :
scomuser ALL=(root) NOPASSWD: /etc/opt/microsoft/scx/conf/tmpdir/scx*
Cette ligne est requise, car la méthode ExecuteShellScript copie le contenu du script avec élévation de privilèges dans un fichier temporaire avec un nom de fichier généré de manière aléatoire et tmpdir l’exécutez à partir de là.
Lorsque vous utilisez la méthode ExecuteShellCommand pour exécuter des commandes avec élévation de privilèges, ajoutez un élément semblable à celui-ci dans votre fichier sudoers :
/bin/shest l’interpréteur de commandes par défaut de l’utilisateur exécutant la commande et (dans cet exemple)./usr/bin/vmstat -cest la commande que vous souhaitez exécuter.
scomuser ALL=(root) NOPASSWD: /bin/sh -c /usr/bin/vmstat -c
Il ne doit pas y avoir de guillemets autour de la commande, car seul l’interpréteur de commandes les reconnaît, sudo ne le fait pas.
Dépannage
Journal des erreurs Sudo
L’une des meilleures façons de résoudre les échecs d’authentification liés aux configurations sudoers peut être d’inspecter le journal sudo sur l’hôte de l’agent.
- Pour les systèmes d’exploitation RedHat, l’emplacement du journal par défaut est
/var/log/secure. - Pour les systèmes d’exploitation Debian, l’emplacement du journal par défaut est
/var/log/auth.log.
Vérifiez le /etc/sudoers fichier du logfile paramètre pour voir où le journal est en cours d’écriture si vous utilisez un autre système d’exploitation ou un emplacement de journal personnalisé.
Invites de mot de passe et délais d’expiration
Par défaut, sudo demande un mot de passe si une commande n’est pas configurée pour NOPASSWD l’utilisateur, il n’existe aucune fonctionnalité permettant d’entrer automatiquement des mots de passe lorsque vous y êtes invité et interrompt la surveillance. Pour éviter les problèmes étendus s’il NOPASSWD n’est pas configuré pour une commande, la recommandation consiste à configurer l’option suivante dans sudoers pour le compte d’utilisateur :
Defaults:scomuser passwd_tries = 1, passwd_timeout = 1
Cet exemple montre comment définir un délai d’expiration d’invite de mot de passe d’une minute pour l’utilisateur scomuser, ce qui permet à la commande d’échouer rapidement si un problème de configuration sudo existe.
Erreurs de mot de passe ou autres échecs d’authentification
Pour obtenir des instructions sur les configurations de mot de passe et d’authentification, consultez Planification des informations d’identification de sécurité pour accéder aux ordinateurs UNIX et Linux.