How to Apply Network Settings to a MED-V Workspace
Article
Administrators can define the network settings for each MED-V workspace.
All network settings are configured in the Policy module, on the Network tab.
To apply network settings to a MED-V workspace
Click the MED-V workspace to configure.
In the Network pane, configure the settings as described in the following table.
On the Policy menu, select Commit.
MED-V Workspace Network Properties
Property
Description
TCP/IP Properties
Use host's IP address (NAT)—The workspace will use NAT to share the host's IP for outgoing traffic.
Use different IP address than host (Bridge)—The MED-V workspace will have its own network address, usually obtained via DHCP.
Select the Map multiple adapters into Workspace check box when the host computer has multiple adapters. It is recommended to use this configuration when the host moves between different networks using different adapters.
DNS Server
Don't change—DNS settings that are set within the MED-V workspace virtual machine will not be changed.
Use Host's DNS address—MED-V workspace DNS settings will be synchronized to match the host's settings. The DNS synchronization is dynamic. It is synchronized periodically with the host so that if it is changed on the host, it will change dynamically in the MED-V workspace.
Use specific DNS addresses—The MED-V workspace will use a specific DNS, as specified.
In the Primary and Secondary fields, enter the primary and secondary DNS addresses.
Select the Append Host's DNS addresses check box to append the host to the configured DNS addresses.
Assign DNS Suffixes
Assign the following suffixes—Select this check box to assign specific DNS suffixes; in the box, enter a suffix or multiple suffixes separated by commas.
Append host suffixes—Select this check box to append the host suffixes to the DNS address.